Categories

Best Stepping Motor Driver Ic

sb components Raspberry Pi Pico Board with Pico Motor Driver HAT Connects 2 DC and 1 Stepper Motor DC Motor Control Module for Raspberry Pi Pico, Raspberry Pi Pico Kit

  • Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing.
  • It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.
  • Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6 V-24 V.
  • Pico Driver Motor HAT is specifically made to work with the Raspberry Pi Pico Board.
Check Stock

Usongshine Stepper Motor Driver TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor（1 pcs

  • Package included: 1 x Stepper Motor Driver..
  • ✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • ✿The largest 32 subdivision of the 6 models are optional.
  • Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper....
  • ✿Protect form✿: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage....
  • ✿Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines,....
Check Stock

BIGTREETECH SKR V1.4 Turbo Control Board 32bit for 3D Printer Compatible with TFT35 E3 V3.0.1/TFT70 Touch Screen Support TMC2209/TMC2208/TMC5160/TMC2130 for Most FDM 3D Printer (with 5*TMC2209)

  • ...ard TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
  • ✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
  • ✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque. spreadCycle allow for highly dynamic motion. Drive current 2A, peak current 2.8A, voltage range 4.75V-29V, 256 subdivision..
Check Stock

NEWASHAN USB Program Cable for Icom Radio CI-V IC-275 IC-706MK2G IC-707 IC-718 IC-735 IC-756Pro IC-910 IC-7000 IC-7300 IC-9100 IC-9700 IC-R700 Clone Cord Cat Lead Wire CT-17 OPC-I17

  • PU USB port version programmer cable with diameter 4.2mm and length 90cm (35.4 inch).
  • Works with Windows Operation System including Win 7, 8, 10, 10 pro, etc..
  • Cable driver are included, but programming software is NOT included (If you do not receive the USB driver, please contact us for more details).
  • Third party and aftermarket accessory and part, Reference Replacement Part Number: OPC-I17.
  • Compatible with Icom walkie talkie with 1-pin plug CI-V, CT-17, IC-78, IC-271A, IC-275, IC-371, IC-375, IC-471E, IC-475, IC-575, IC-703, IC-706, IC-706MK2G (IC-706MKIIG), IC-707, IC-718, IC-721, IC-723, IC-725, IC-726, IC-728, IC-729, IC-731, IC-732, IC-735, IC-736, IC-737, IC-738, IC-746, IC-750, IC-751, IC-756, IC-756 Pro, IC-756 Pro 3, IC-760, IC-761, IC-764, IC-765, IC-775, IC-780, IC-781, IC-820, IC-7000, IC-7300, IC-9100, IC-9700, etc..
Check Stock

(5PCS) SSC9522S IC CTLR QUASI RES AC/DC 8SOP 9522 SSC9522

  • Description:IC DRIVER 3PHASE MOTOR 20-DIP.
Check Stock

EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17 23 Series Stepper Motor CNC Controller single Axis Hybrid MicroStepping

  • This driver is an upgraded version of TB6600 and with plastic cover..
  • The subdivision is increased to 32 subdivision, which is suitable for high subdivision..
  • Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A..
  • Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires).
  • Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines,....
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...ite RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angl....
Check Stock

CT-17 USB Programming Cable for ICOM Radio IC-7000 IC-7800 IC-7300 IC-7100 IC-7200 IC-7610 IC-7700 IC-7810 IC-718 IC-756 IC-746 IC-706 IC-703

  • USB Programming Cable Compatible with Icom Radio CT-17.
  • 3.5 mm audio plug , For 32 and 64 bit Windows and Mac operating systems.
  • Made of high quality material, super stable and efficient..
  • Compatible With Radios:IC-275, IC-375, IC-475, IC-575, IC-703, IC-706, IC-707, IC-718, IC-725, IC-726, IC-728, IC-729, IC-735, IC-736, IC-737, IC-738, IC-746, IC-756, IC-746 Pro IC-761, IC-765, IC-775, IC-781 IC-820, IC-821, IC-910, IC-970 ，IC-7000, IC-7400, IC-7600, IC-7700, IC-7800 IC-R7000, IC-R7100, IC-R8500, IC-R9000 IC-1275 IC-R10, IC-R72, IC-R75, IC-78 IC-756Pro, IC-756ProII, IC-756ProIII.
  • Package included: USB cable with USB driver CD (Not include CPS program software).
Check Stock

Stepper Motor Driver Module PCB Board DRV8825 for 3D Printer RepRap StepStick

  • · Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • · Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor?s rated voltage to achieve higher step rates.
  • · Built-in regulator (no external logic voltage supply needed).
  • · Exposed solderable ground pad below the driver IC on the bottom of the PCB.
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

Canon EF-S 10-18mm f/4.5-5.6 IS STM Lens

  • EF S ultra wide zoom lens. Drive System Lead screw and rack system driven by stepping motor.
  • Focal Length and Maximum Aperture: 10 18 millimeter, 1:4.5.
  • Stepping motor for noise free video shooting.
Check Stock

Acogedor 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V (without touch)

  • ?2.8 inch color screen, support 65K color display, and the display is colorful.
  • ?With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
  • ?At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
  • ?This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
  • ?The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
Check Stock

Canon EF-S 10-18mm f/4.5-5.6 IS STM Lens (Renewed)

  • EF-S ultra wide zoom lens. Drive System-Lead screw and rack system driven by stepping motor.
  • Focal Length & Maximum Aperture: 10-18mm,1:4.5 - 5.6.
  • Closest Focusing Distance: 0.72 ft. / 0.22m.
  • Stepping motor for noise-free video shooting.
Check Stock