Categories

Best Stinger Bumper Trim

DJX Metal CNC Front Bumper with LED Light for 1/10 RC Crawler Car Traxxas TRX-4 Axial SCX10 & SCX10 II 90046

  • Special CNC Aluminum machined design with Stinger Style.
  • Removable front push bar with the stinger hook.
  • Can change the look of the bumper to match your truck and body style.
  • Fit 1/10 RC Traxxas TRX-4 Axial SCX10 & SCX10 II 90046.
Check Stock

Tidal Stinger Front Bumper with Winch Plate Fit for 84-01 Cherokee XJ/Comanche MJ

  • STINGER BAR - This rock crawler bumper's benefit is the bolt on stinger bar, which will help to prevent your Cherokee from flipping forward when....
  • POWERFUL LED LIGHTS INCLUDED - Two 12W LED lights included..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring....
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel....
Check Stock

Woodzdon 50 Pcs 1/4 Hole Nylon Blind Rivet Fender Flare Bumper Cover Door Trim Retainer for Jeep Wrangler Liberty for GM 10184895 for Chrysler 6506007-AA for Ford N803862-S Plastic Expansion Clip

  • Hole Diameter: 1/4", Panel Range (Grip): 5/32"-13/32".
  • Replaces for GM 10184895, 20452072, for Ford N803862-S, for Chrysler 6501559, 6506007-AA, for Auveco 13751, Other Part Number: N803862S, 6506007AA.
  • Product Names: Nylon Blind Rivet, Nylon Expansion Rivet, Fender Flare Rivet, Bumper Cover Rivet, Door Trim Rivet, Fender Liner Rivet, Bumper Fascia Rivet.
  • Fitment: for Chevrolet Camaro 1996-2002, for Chevrolet Lumina 1991-1994, for Pontiac Firebird 1996-2002, for Chrysler 300M 1999-2004, for Chrysler Concorde 1999-2004, for Chrysler LHS 1999-2001, for Dodge Intrepid 1999-2004, for Dodge Nitro 2007-2011, for Jeep Gladiator 2020-2021, for Jeep Grand Cherokee 2017-2020, for Jeep Liberty 2002-2012, for Jeep Wrangler 2007-2021, for Jeep Wrangler JK & Wrangler Unlimited JK 2007-2021, Liberty KJ 2002-2012.
  • Other Names: Bumper Rivet, Fender Rivet, Plastic Rivet, Nylon Blind Clip, Nylon Expansion Clip, Fender Flare Clip, Bumper Cover Clip, Door Trim Clip, Fender Liner Clip, Bumper Fascia Clip, Bumper Clip, Fender Clip, Plastic Clip, Nylon Blind Retainer, Nylon Expansion Retainer, Fender Flare Retainer, Bumper Cover Retainer, Door Trim Retainer, Fender Liner Retainer, Bumper Fascia Retainer, Bumper R....
Check Stock

STREAMLIGHT Stinger Smart Charger Holder with 100V/120V AC Wall Adapter Charge Cord - Intended for Use with Stinger Series Flashlights

  • Includes new Stinger Smart Charger Base and new-style IEC-A Fast AC (Wall) Adapter Cord.
  • Fits ALL Stinger series flashlights, including Stinger, Stinger LED, Stinger HP, Stinger HPL, PolyStinger, Ultra Stinger, and more..
  • Charger base DOES NOT FIT Strion series flashlights.DescriptionThis is the new Smart Charger base/holder for the Stinger series of flashlights by Streamlight (including, but not limited to: Stinger, Stinger Classic, Stinger LED, Stinger LED HL, Stinger HP, Ultra Stinger). This is the combination pack, which includes the Smart charging base AND new-style IEC-A Fast AC charging cord. The AC charging cord may be used with any Streamlight Stinger or Strion charging base. The Smart Charger base may also be charged with a Micro USB cord if the AC charge cord is not available (charge performance is better with the AC cord)..
Check Stock

DE 75375 75175 Battery for Streamlight Stinger Nimh 2600mAh 3.6V Battery

  • 2600 3.6V NIMH Replacement Battery for most standard stinger flashlight models..
  • Works with all standard stinger flashlights, Streamlight Stinger, Stinger LED, Stinger LED HP, Stinger DS LED HP, Stinger HP, Stinger XT, PolyStinger, PolyStinger LED and PolyStinger DS LED flashlights, even the 15 year old 75014. Full model number list included in the description..
  • The DE75375 replaces the NiCd 75175 batteries that came with the older stinger models as well as works with all new stinger models..
  • Up to 1,000 recharge cycles. 4-6 years shelf life. More than 2x the voltage of a typical alkaline primary cell..
  • Digital Energy has been manufacturing electronic accessories for over 20 years, and we pride ourselves on our customer service. If you have any questions or concerns please dont hesitate to contact us..
Check Stock

Forever Car Car Products Forever Black Bumper & Trim Kit (6oz Kit)

  • Kit includes: one 6-oz of forever black bumper and trim dye, one 4-oz of forever black cleaner concentrate and one applicator brush.
  • Permanently dyes all textured black plastic, rubber and vinyl with the same polymers that the manufacturers use.
  • Bumper and Trim Reconditioner will only adhere to porous plastic, rubber and vinyl.
Check Stock

DE 75175 Replacement Battery for Streamlight Stinger Flashlights - 2000Mah 3.6V Nicad Battery

  • 20000mAh 3.6V NICad Replacement Battery for most standard stinger flashlight models..
  • Works with all standard stinger flashlights, Streamlight Stinger, Stinger LED, Stinger LED HP, Stinger DS LED HP, Stinger HP, Stinger XT, PolyStinger, PolyStinger LED and PolyStinger DS LED flashlights, even the 15 year old 75014. Does not work for the ultra or the headlamps. Full model number list included in the description..
  • The NiMH DE75175 is a 1 to 1 replacement of the pn75175 NiCad battery that comes with older streamlight models..
  • Up to 1,000 recharge cycles. 4-6 years shelf life. More than 2x the voltage of a typical alkaline primary cell..
  • Digital Energy has been manufacturing electronic accessories for over 20 years, and we pride ourselves on our customer service. If you have any questions or concerns please dont hesitate to contact us..
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

GEILIENERGY (2 Pack) 3.6V 2000mAh Digital Battery Compatible with Streamlight Stinger 75375 75175 XT Flashlight Battery

  • Chemistry: Ni-MH Voltage: 3.6V Capacity: 2000mAh Length:131mm (5.16 inch) High Capacity Battery.
  • Replacement For Streamlight 75375 75175 Flashlight Battery.
  • Works with all standard stinger flashlights, Streamlight Stinger, Stinger LED, Stinger LED HP, Stinger DS LED HP, Stinger HP, Stinger XT, PolyStinger, PolyStinger LED and PolyStinger DS LED flashlights, even the 15 year old 75014..
  • Compatible with: Streamlight 75175, 75300, 75301, 75302, 75303, 75304, 75305, 75306, 75307, 75308, 75309, 75310, 75311, 75500, 75501, 75502, 75503, 75504, 75505, 75506, 75510, 75511, 75512, 75513, 75514, 75515, 75516, 75521, 75522, 75523, 75524, 75525, 75526, 75531, 75532, 75533, 75534, 75535, 75536, 75710, 75711, 75712, 75713, 75714, 75715, 75716, 75732, 75733, 75734, 75735, 75736, 75737, 75810, 75812, 75813, 76000,76600..
Check Stock

GEILIENERGY (2 PCS) 3.6V 3000mAh NIMH Battery Stick for Streamlight Stinger LED HP, XT,75175 PolyStinger, Pelican M9

  • Chemistry: Ni-MH Voltage: 3.6V Capacity: 3000mAh Length:131mm (5.16 inch) High Capacity Battery.
  • Replacement For Streamlight 75375 75175 Flashlight Battery.
  • Works with all standard stinger flashlights, Streamlight Stinger, Stinger LED, Stinger LED HP, Stinger DS LED HP, Stinger HP, Stinger XT, PolyStinger, PolyStinger LED and PolyStinger DS LED flashlights, even the 15 year old 75014..
  • Compatible with: Streamlight 75175, 75300, 75301, 75302, 75303, 75304, 75305, 75306, 75307, 75308, 75309, 75310, 75311, 75500, 75501, 75502, 75503, 75504, 75505, 75506, 75510, 75511, 75512, 75513, 75514, 75515, 75516, 75521, 75522, 75523, 75524, 75525, 75526, 75531, 75532, 75533, 75534, 75535, 75536, 75710, 75711, 75712, 75713, 75714, 75715, 75716, 75732, 75733, 75734, 75735, 75736, 75737, 75810, 75812, 75813, 76000,76600..
Check Stock

SafeAMP 12-Volt Charger for Streamlight Rechargeable Flashlights

  • Compatible with most Streamlight Flashlights and Charger Bases and Holders except ultrastinger fast charger and hid litebox.
  • Fits most Stinger series flashlights, including Stinger, Stinger LED, Stinger HP, Stinger HPL, and more.
Check Stock

STREAMLIGHT Stinger Smart Charger Holder with 12V DC Car Charge Cord - Intended for Use with Stinger Series Flashlights

  • RECHARGE YOUR FLASHLIGHT - This bundle includes Streamlight Stinger Smart Charger Holder (75105) and Streamlight 12V DC Car Charge Cord (22051).
  • STINGER SMART CHARGER - This is a dual power input charger.
  • It features a micro USB port and also accepts 12V DC car charge cord and 100V/120V AC home....
  • CHARGING TIME - Charging Time is 3 to 7.5 hours depending on power source and battery capacity.
  • COMPATIBILITY - The Stinger Smart Charger Holder works with Stinger series flashlights, including Stinger 2020, Stinger DS LED HL/LED HL, Stinger....
  • 12V DC CAR CHARGE CORD INCLUDED - Replacement power cord for most Streamlight rechargeable flashlights.
  • It features 12V DC input and lighter plug.
Check Stock

Havoc Compatible with Offroad Stubby Bumper 2007-2018 Jeep Wrangler JK Front Bumpers Metal Masher w/Stinger

  • Stubby front bumper for a great approach angle and maximum tire clearance.
  • Stinger bar made of 2" 120 wall tubing with reinforcing gussets.
  • Fog light recesses accept factory fog lights. Winch mount for most standard 10 x 4.5" bolt pattern winches.
  • Shackles, all hardware, and fog light wire extension included.
  • Backing plate to customize the Havoc logo with your favorite color or lights.
Check Stock