Categories

Best Stock Placement

Lancer Tactical Gen 2 Airsoft M4 AEG Carbine 10' (Gray - High Velocity)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • RAIL SYSTEM FOR ATTACHMENTS – 7 lines of keymod on rail for customized placement of rail panels.
  • 2 removable 6-rib and 1 removable 10-rib rail sections for placement of accessories.
  • GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6.03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9.6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • FEATURES – Rear sling mount is perfect for single point slings.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

Evolution Powersports EVO Worlds Best Bad Ass Drive Belt Can-Am Maverick X3

  • Fitment: for Polaris RZR XP 1000 2014-2021 all model..
  • Function:Replace your worn or damaged Polaris Primary clutch with a new stock unit.Come with weights and spring.
  • Upgrade: We’ve fine-tuned the clutch arm placement and angle to give you better engagement at any RPM. Plus, we include weighted clutch arms and a new primary clutch spring. Our spring rate, arm placement, and arm weight have been tested and tuned on our in-house dyno to give you maximum performance. This clutch reduces belt slippage and power loss, and it delivers more torque and power to the ground. That means you get better low and mid-range acceleration and throttle.
  • Note:Professional installation is highly recommended (No Instruction).
Check Stock

Lancer Tactical LT-19 Gen 2 M4 Carbine AEG Airsoft Rifle (Tan High FPS Polymer Style)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • RAIL SYSTEM FOR ATTACHMENTS – 7 lines of keymod on rail for customized placement of rail panels.
  • 2 removable 6-rib and 1 removable 10-rib rail sections for placement of accessories.
  • GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6. 03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • FEATURES –High capacity magazine holds 300 rounds.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with Clear Acrylic Guide

  • See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch.
  • Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes.
  • Backed by Amazon's A-Z Guarantee with Prime available and a 1 year manufacturer guarantee.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
  • Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass.
Check Stock

321Done Share a Memory Card (50 Cards) 4' x 6' Floral Red Roses - for Wedding Memorial Funeral Graduation Bridal Shower Celebration of Life Birthday Anniversary - Made in USA - Kraft Tan

  • SUPERIOR QUALITY: Designed and made in the USA using fine quality card stock and print - the kind of quality you want for storing your precious memories..
  • PREMIUM CARD STOCK: Thick, durable 14pt (140lb / 300gsm) card stock with a smooth, matte, easy-to-write-on finish. Heavy weight makes cards perfect for placement in a memory jar or book or on a memory board. Acid-free card stock won't yellow so your guests' memories and messages will stand the test of time..
  • PERFECT KEEPSAKE: For celebration of life, funeral, memorial, bridal shower, going away, anniversary, birthday, graduation, retirement party, or any special occasion where remembrance cards will add a thoughtful and personal touch. An ideal guest book alternative..
  • PROFESSIONALLY PRINTED: Sharp, smudge-proof printing in rich, beautiful color. Striking red floral design catches guests' eyes and invites them to share their favorite memory of the loved one. Please note that this is NOT kraft paper. It is printed with a rustic kraft look..
Check Stock

lancer tactical full metal gear with 10 keymod rail interface system polymer body lt-19 (black)(Airsoft Gun)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • RAIL SYSTEM FOR ATTACHMENTS – 7 lines of keymod on rail for customized placement of rail panels.
  • 2 removable 6-rib and 1 removable 10-rib rail sections for placement of accessories.
  • GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6. 03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • FEATURES – Rear sling mount is perfect for single point slings.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

Tourbon Elastic Rifle Buttstock Ammo Cartridge Holder - Hold 10 Shells

  • Holds 10 Rifle cartridge shells like 30 30,7.62,.223,.308,7mm , 45-70 ,30-06,8mm ,300win and so on.
  • Have a strong elasticity to fit all stocks.
  • Durable holder hugs securely onto guns stock.
Check Stock

3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack

  • Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
  • Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Westcott E-15804 00 12-Inch Multi-Purpose Personal Trimmer - Blue/Black

  • Multi-Purpose Personal Trimmer with cutting and folding blades.
  • Spring loaded blade system for cleaner, straighter cuts.
  • Lift up arm for easier placement of paper, Translucent guard for accurate cutting.
  • Cuts up to 10 sheets paper. Great for card-stock, construction paper, photographs and more..
Check Stock

UKARMS CQB P1402 Spring Airsoft Tactical Sniper Rifle Gun : Folding Stock + Flashlight + Bipod

  • MATERIALS – Designed with reinforced Nylon polymer frame and furniture.
  • full metal version 2 gearbox with an upgraded torque motor.
  • ATTACHMENTS & EXTENSIONS – Upgraded handguard with removable handguard extension, 200mm top optic rail mounts scopes, sights, and magnifiers.
  • upgraded flip-up front and rear iron sights with quick deploy release.
  • GEARS – Metal gears and cylinder teeth are built inside the ver. 2 gearbox.
  • gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6. 03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9. 6 V Nunchuck) placement is sealed with a cover located in the back of the stock.
  • low resistance wiring prevents potential damage from the battery.
  • FEATURES – Fires in full-auto and semi-auto, with a functional safety.
  • the quick-change spring system make changing springs effortless.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

Jet Planer/Jointer Combo, 9000 rpm, 13A

  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
  • Indexing pins for quick alignment against the edge of the work piece for accurate placement.
  • Tenons up to approximately 5-1/2-Inch in length for large scale projects.
  • Includes optional trim and cross stops for narrow stock and edge joining.Power Consumption:420 watts.
Check Stock

Pendaflex Colored End Tab Folders With Reinforced Double-Ply Straight Cut Tabs

  • Make your open-shelf filing system work for you with color coding. Colorful end tab folders have reinforced double-ply end tabs that stand up to frequent use..
  • Tabs with scored lines for easy label placement..
Check Stock

Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack

  • Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
  • Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock