Categories

Best Stone Working Router

DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control

  • On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
  • Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
  • (2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
  • Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
  • The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
  • With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.
Check Stock

SpeTool Spiral Flush Trim Router Bit,1/4 Inch Shank 1-1/8 Inch Cutting Length Extra Long 3 Inch OVL,UP Down Compression Bit for Wood Trimming

  • Sturdy Durable: The flush cut router bit is made of premium carbide according to stringent Industrial grade quality standards provide tough, resists wear and high cutting performance..
  • Sharp Efficient: The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.provide better chip evacuation, less heat buildup, and cleaner edges..
  • Smooth Stable: The router bearing bit uses a double ball bearing pilot at the tip to run against your project template ensure smooth running..
  • Wide Application: This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work..
  • Compatibility: The spiral flush trim Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with table mount and handheld router with 1/4" collet..
Check Stock

TAIWAIN Router Bit Set 1/4 Inch Shank 5PCS Architectural Picture Frame Molding Bits, Wood Milling Cutter Router, Woodworking Miter Carbide CNC Cutting Tool for Doors, Tables(F-line)

  • ▲ Size--The 1/4" shanks router bits. Create Architectural Picture Frame Molding. Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting using. Router bit cutter material is YG6 Solid Hardened Steel..
  • ▲ Wide Working--The router bits works great with all kinds of materials and surfaces, like woods, mdf, particle boards, plywood, panels, softwood, hardwood and many others. which is truly versatile for your extra convenience. perfect for woodworking..
  • ▲ Exquisite Design--Solid hardened steel bodies with Anti-Kickback Design, Use on CNC and other automatic table-mounted portable routers.You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily..
  • ▲ Quality Tools--Constructed using high quality materials, Using high-grade YG6X original alloy. High abrasion resistance, high-precision grinding technology. Strong and durable. these woodworking tools can withstand some heavy duty use and the test of time..
  • ▲ Multiple Uses--These router bit tools can enhance your hardwood working performances and create beautifully handmade furniture on your own. Great for kitchen and bathroom doors, office cabinets, flooring tables, bedroom shelves, outdoor frames, walls and more..
Check Stock

3/8" Diamond Radius Bullnose granite countertop Shaping router bit 4" Diamond Resin Dry Polishing Pad sanding disc grinding cup wheel 8+1 stone concrete floor surface repair terrazzo sander

  • The router bit and pad holder is 5/8"-11 Thread. NOT M14 Thread. VERY IMPORTANT REMIND: Velcro Backer's max capacity is 5000 RPM. Please don't use it with high speed grinder/polisher..
  • (a) 1 Piece of B10 (10 mm / 3/8") Roundover / Radius / Demi / Half Bullnose Diamond Brazed Router Bit/Profile for 10 MM High or Thick stone concrete (5/8"-11 Thread arbor)..
  • (b) 1 Piece of 4 Inch / 100 mm Diamond Turbo Grinding cup wheel for stone concrete surface grinding (it is vecro backed, using with the pad holder)..
  • (c) 7 Pieces of 4" / 4 Inch / 100 mm Diamond PREMIUM GRADE DRY Polishing Pad for granite marble concrete: 1 X Grit 50 100 200 400 800 1500 3000. And 1 Piece of 4" / 4 Inch / 100 mm Velcro Backer/Pad Holder (5/8"-11 Thread arbor)..
  • -ideal speed of grinder/polisher: 3500-4500 RPM. - please don't use with high speed grinder/polisher..
Check Stock

TAIWAIN 1/2-Inch Shank Tongue and Groove Flooring Router Bit Set V-Notch Wainscotting Wood Milling Cutter Woodworking Miter Carbide CNC Cutting Tool for Doors,Tables F-1-2BK

  • ◆ Size--The 1/2" shanks Tongue and Groove V-Notch Router Bit. Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting using.....
  • ◆ Multiple Uses--These router bit tools can enhance your hardwood working performances and create beautifully handmade furniture on your own. Great....
  • ◆ Exquisite Design--Solid hardened steel bodies with Anti-Kickback Design, Use on CNC and other automatic table-mounted portable routers.You can....
  • ◆ Quality Tools--Constructed using high quality materials, Using high-grade YG6X original alloy. High abrasion resistance, high-precision grinding....
  • ◆ Wide Working--The router bits works great with all kinds of materials and surfaces, like woods, mdf, particle boards, plywood, panels, softwood,....
Check Stock

TAIWAIN Router Bit Set 4PCS 1/4 Inch Shank Door&Drawer Front Edging Bits, Miter Frame Crown Molding Wood Milling Cutter Router, Woodworking Miter Carbide CNC Cutting Tool for Woodwork(F-1-4MG)

  • ▲ Size--The 1/4" shanks router bits. Create Door&Drawer Frame Crown Molding. Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting using. Router bit cutter material is YG6 Solid Hardened Steel..
  • ▲ Multiple Uses--These router bit tools can enhance your hardwood working performances and create beautifully handmade furniture on your own. Great for kitchen and bathroom doors, office cabinets, flooring tables, bedroom shelves, outdoor frames, walls and more..
  • ▲ Wide Working--The router bits works great with all kinds of materials and surfaces, like woods, mdf, particle boards, plywood, panels, softwood, hardwood and many others. which is truly versatile for your extra convenience. perfect for woodworking..
  • ▲ Quality Tools--Constructed using high quality materials, Using high-grade YG6X original alloy. High abrasion resistance, high-precision grinding technology. Strong and durable. these woodworking tools can withstand some heavy duty use and the test of time..
  • ▲ Exquisite Design--Solid hardened steel bodies with Anti-Kickback Design, Use on CNC and other automatic table-mounted portable routers.You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily..
Check Stock

Wifi Relay Module, 5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch

  • 2 WORKING MODES---Mode 1: The phone is directly installed on the WiFi module.
  • Mode 2: Equipped with a mobile phone and WiFi module on the router.
  • Additional features: It can also be used as a USB relay when the ESP-01 is pulled out.
  • TRANSMISSION DISTANCE---In an open environment, when the mobile phone is installed on the WiFi module, the maximum stable transmission distance is 100M. When the WiFi module and the mobile phone are simultaneously carried on the router, the transmission distance depends on the signal strength of the router.
  • SMARTCONGIG TECHNOLOGY---Use smartcongig technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions.
  • SHORT RESPONSE TIME---On-board 5V,10A250V AC 10AV30V DC relay, which can continuously pull 100,000 times, with diode discharge protection and short response time. Onboard ESP-01 WiFi module and high performance microprocessor STM8S103.
  • OTHER EQUIPMENT---Board mode selection and real-time working status indicator. Reserved UART debug interface and STM8 SWIM program download interface.
Check Stock

Slab Jig – Router Sled for Woodworking – Levels Wood Slabs Up to 64 Inches Wide! Portable, Durable, and Easy to Adjust! Great for River Tables and Home Improvement Projects!

  • SAVE TIME AND MONEY ON WOODWORKING – Use a Slab Jig to level your woodworking projects without the high cost of a CNC machine! Cut your wood slabs down to size while saving time and money!.
  • COMPATIBLE WITH MOST ROUTERS – Slab Jigs are adjustable to fit most fixed based routers, so you can level out large wood slabs, fast and easy! If you’re looking for a cost-efficient router guide, look no further than a slab flattening jig!.
  • FULLY ADJUSTABLE – Adjust your new router jig to fit a wide variety of table sizes! Easily plane slabs up to 64 inches wide!.
  • BUILT TO LAST – Slab Jigs are built TOUGH! Our router planer rails are made from high-quality machined aluminum, meaning they won’t bend or warp, even after lots of heavy use! Like other products from Stone Coat Countertops, your Slab Jig will last for years to come!.
  • EASY TO ASSEMBLE – Includes all the parts you need to put together your new router planing sled in a matter of minutes! Then, you’ll be ready to work on river tables, plane wood slabs, and so much more!.
Check Stock

Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Up-Cut)

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

TAIWAIN Router Bit 1/2-Inch Shank Classical Door and Drawer Front Edging, 4PCS Bit Set Woodworking Miter Carbide CNC Cutting Tool for Woodwork, Door Cabinet Matched Rail & Stile Router Bit Set(F-1-2MG)

  • ▲ Size--The 1/2" shanks router bits. Create Door&Drawer Frame Crown Molding. Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting using. Router bit cutter material is YG6 Solid Hardened Steel..
  • ▲ Exquisite Design--Solid hardened steel bodies with Anti-Kickback Design, Use on CNC and other automatic table-mounted portable routers.You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily..
  • ▲ Quality Tools--Constructed using high quality materials, Using high-grade YG6X original alloy. High abrasion resistance, high-precision grinding technology. Strong and durable. these woodworking tools can withstand some heavy duty use and the test of time..
  • ▲ Wide Working--The router bits works great with all kinds of materials and surfaces, like woods, mdf, particle boards, plywood, panels, softwood, hardwood and many others. which is truly versatile for your extra convenience. perfect for woodworking..
  • ▲ Multiple Uses--These router bit tools can enhance your hardwood working performances and create beautifully handmade furniture on your own. Great for kitchen and bathroom doors, office cabinets, flooring tables, bedroom shelves, outdoor frames, walls and more..
Check Stock

Downcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Down-Cut)

  • Professional Downcut Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY DOWN-CUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch downcut spiral flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The downcut spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

Lanzeuta 1/2-Inch Shank Router Bit Collet Extension Chuck, Convert 1/2-Inch & 1/4-Inch Shank Bits with ER20 Spring Collet, ER20 M Type Collet Chuck Wrench - Set of 4

  • ...the full depth of cut. Just place the router collet extension shank in the 1/2-inch router collet and the router bit shank in the extension collet and tighten both..
  • Ideal Application -- Our router collet extension chuck accepts both 1/4" and 1/2" shank router bits for converting and extending. And it can extend the working depth of the router bit by an additional 2-1/4 inches. Suitable for woodworking trimming, milling, and engraving machine..
  • Purchase with Confidence -- Lanzeuta provide a full refund for any reason within 90 days after the date of purchase. If you have any questions, we offer 24hrs customer service. This is our confidence in product quality and commitment to customers. Please click "Add to Cart"!.
Check Stock