Categories

Best Stop Oil Solenoid Valve

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve for Aquarium Plants Tanks

  • PROFESSIONAL! Professional CO2 generator system with SUS304 stainless steel bottle, regulator, bubble counter, safety valve. Far better than simple plastic bottle generators: more reliable, steady, durable, efficient..
  • SAFE! The bottle body adopts 1.5mm thickness SUS304 stainless steel(more 25% thickness than normal 1.2mm), blasting pressure up to >80kg/cm2(1137PSI), Safety valve will open automatically when it exceeds the safe pressure..
  • NEEDLE VALVE WITH BUBBLE COUNTER! Together with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter with check valve function, stop water backflow to bottle. Aquarium specific needle valve, High precision fine-tuning easy for co2 to be 1 bubble in 3 seconds..
  • OPTIONAL MINI DC 12V SOLENOID! You can choose a 12V DC solenoid valve with the generator, will automatic turning on/off CO2 output with timer..
  • ATTENTIONS: Solenoid NOT included, need order seperately..
Check Stock

WMPHE Solenoid Valve Kit Compatible with Chevy HHR Malibu Equinox GMC Terrain GM Vehicles 2.0 2.2 2.4L Intake and Exhaust Camshaft Position Actuator Replaces OEM 12655421 12655420

  • Ntake solenoid compatible with 2.0L / 2.2L / 2.4L engines - 2006 - 2010 Chevy Cobalt, 2006 - 2011 Chevy HHR, 2007 - 2009 Saturn Aura, 2008 – 2014....
  • Replace OEM 12655420, 12628347, 12646783, 12578517, 12679099, 917215, 917-215, 2T1014. Exhaust Solenoid - 12655421, 12628348,12646784,12578518,....
  • Made from grade material for durability. Precision and quality are sured. Each Camshaft Position Actuator Solenoid Valve is manufactured to the same....
  • There are some symptoms that show the solenoid valve are not functioning well, Check Engine Light On, Dirty Engine Oil, Roughness in Idling Engine and....
  • One pair new camshaft position actuator solenoid Valve 100% test before shipping. Suggest you check fitment details to make sure this will fit your....
Check Stock

HiSport Engine Variable Valve Timing VANOS Solenoid 11367585425- Oil Control Valve Replacement For BMW 1 Series M 135i 328i 335i 525i X3 X5 128i 328i N51 N52 N54 3.0L V6 & more

  • ➤FITS VEHICLES : Fit Replacement for BMW 2.0L 2.5L 2.8L 3.0L VANOS Engine, including BMW 128i 135i 323i 325i 325xi 328i328xi 330i 330xi 335i 335is 335xi 525i 525xi 528i 528xi 530i 530xi 535i 535xi 740i 740Li X3 X3 X6 Z4, please check the fitment information below..
  • ➤PERFECT REPLACEMENT : Compability with 11367585425, 11367516293, 917-241, 917241, VTS1017, VVT207, 0242037, VVS177, 7V9018, 2T1046.
  • ➤CREDIBLE CHOICE : Codes typically triggered by this solenoid valve are 2A87, 2A82, 2A9A, 2A9B, P0016 or P0017 our Camshaft Position Actuators(also called VVT Solenoids) will fix your problem and restore your vehicle's driveability..
  • ➤VARIABLE VALVE TIMING SOLENOID : Each HiSport Variable Valve Timing (VVT) Solenoid is manufactured to the same specifications as the factory (VVT) Solenoid. Each (VVT) Solenoid is constructed with precision machined parts and includes new viton oil seals for a leak free installation..
  • ➤WHAT YOU GET - Set of 2 variable valve timing solenoid, and our worry-free lifetime warranty and friendly customer service.
Check Stock

HFS 110v Ac Electric Solenoid Valve Water Air Gas Fuels N/c - 1/2IN NPT Available 110V AC 1/2IN NPT

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/2IN NPT Available (12V DC 1/2IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/4IN NPT Available (12V DC 1/4IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

DIGITEN Water Flow Control Meter LCD Display Controller+G1/2\ Water Hall Sensor Flow Meter Flowmeter Counter 1-30L/min+G1/2\ Solenoid Valve Normally Closed N/C+DC 12V Power Adapter

  • ...reen & Monitor Flow Rate】: Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly..
  • ★【Quantitative Control & Alarm Function】: The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control. It can automatically stop water filling into your concrete mixer. When the total amount reaches the setting value, the controller will alarm..
  • ★【Work with All Hall Effect Flow Sensor】: It can work with various different flow sensors through adjust the K value. High quality, come with temperature sensor, it can measure liquid temperature..
  • ★【Wide Applications】: Swimming pool, water dispenser, coffee machine, drip irrigation system, beer brewing, etc. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liquids other than wat....
Check Stock

SCITOO Canister Purge Solenoid Carbon Tank Solenoid Valve Compatible With 2008-2013 GMC Sierra 1500 4.8L 5.3L 6.0L 6.2L 2016-2017 Chevrolet LCF 3500 4500 6.0L

  • Applications- Compatible for 2008-2017 Chevrolet Express 3500 4.8L, 2011 Chevrolet Express 3500 6.6L , 2016-2017 Chevrolet LCF 3500 4500 6.0L , 2007-2014 Chevrolet Suburban 1500 5.3L ,2007-2009 Chevrolet Tahoe 4.8L , 2008-2013 GMC Sierra 1500 4.8L 5.3L 6.0L 6.2L, 2010-2018 GMC Sierra 2500 HD 6.0L.
  • Reference Number- 911082, 2142137, PV479, PV479. 1x Carbon Tank Canister Purge Solenoid.
  • Function – Canister Purge Solenoid absorbs the oil and gas volatilized from gasoline in the tank to prevent the oil and gas from entering the atmosphere to pollute the environment. The function of canister purge solenoid valve is that when the oil and gas in the tank reaches a certain amount, it opens and allows the oil and gas to enter the engine for combustion and reuse.
  • Benefit – Canister purge solenoid valve is made of high-quality industrial plastics, which can withstand low and high heat engine operating temperature. 400 degrees Fahrenheit and high heat resistance.
  • Attention- You can refer to the reference number or check the compatibility to make sure whether this item is suitable for your vehicle.
Check Stock

Wyin CO2 Regulator Aquarium 12V DC CO2 Solenoid Pressure Adjustable with Big Dual Gauge Display, Bubble Meter can be Connected, Check Valve, Aquarium Co2 Kit Fits Two Standard US Tanks

  • 【Peace of Mind After Sale】 In order to improve your sense of the use of our product, we provide an additional set of accessories (copper tube+spring iron) for the solenoid valve of this product. If your solenoid valve reaches the service life, you can replace it yourself to extend the service life of the product. If you have any questions, please feel free to contact us!.
  • 【Can be Used for Multiple Aquariums】The CO2 regulator aquarium kits is equipped with multiple bubble meters that can be connected to multiple aquariums at the same time. It is simple and convenient to operate. The module of the bubble counter can be purchased in this shop.
  • 【New upgrade bubble counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
  • 【Waterproof Solenoid Valve 】 Our co2 solenoid valve adopts the new integrated injection molding technology, which is waterproof and do....
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

uxcell Solenoid Valve Water Inlet Seal Ring Gasket Normally Closed Seals Sealant Kits Accessories 1/2‘’ Thread

  • Advantage: If the seal ring is used for too long, it will naturally erode, then lose its function, or leak oil due to its poor function. Replace the new seal ring to make the solenoid valve work normally..
  • Applicable to the normally closed inlet valve and drain valve..
  • Total Size: 9.5x26mm/0.37‘’x1.02''(HxD).
  • Installation angle: Right Angle (90 degrees).
  • Package:1 x Solenoid Valve Water Inlet Seal Ring.
Check Stock

Spool Valve Assembly VTEC Solenoid with Timing Oil Pressure Switch and Gasket | for Honda Accord CRV CR-V Civic Si Element Acura RSX | Replace# 15810-RAA-A03 15810-PNE-G01 15810-PPA-A01 15810-RAA-A01

  • OEM FIT: This VTEC actuator has undergone a rigorous testing to ensure proper operating parameters to factory specification, exactly OEM design to replace your defective solenoid valve. Give you full control to accelerate the car beyond 3000 RPM with no hesitation.
  • PREMIUM QUALITY: The vtec camshaft solenoid utilizes aluminum valve bodies that are surface-treated to create micro finished surfaces for increased wear resistance, means you will get a fairly reliable solenoid assembly to perform excellently under all engine operating conditions.
  • FITS: 2003-2007 Honda Accord 2 Door Coupe, 03-07 Accord 4 Door Sedan, 2002 2003 2004 2005 Honda Civic Si Models, 2002-2009 Honda CR-V, 2003-2011 Honda Element, 02 03 04 05 06 Acura RSX Base L Models. Comes with oil pressure switch, gasket and heat shield installed.
  • REPLACE OEM PART NUMBER: 15810-RAA-A03, 15810-PNE-G01, 15810-PPA-A01, 15810-RAA-A01, 15810-RAA-A02, 15815-RAA-A02, 37250-PNE-G01. Robust spool valve filter screen design for greater resistance to leakage, improved durability and compatibility with a wide range of fuels.
  • 24-MONTH WARRANTY: Oil flow rate, pressure and leakage are tested on every unit for years of effective performance. If the spool valve solenoid fails, stops working or any other problems, y....
Check Stock