Best Straight Edge For Circular Saw
Kreg ACS2000 Adaptive Cutting System, Saw + Guide Track Kit
- Premium Home Improvement Tools: The plunge saw and saw guide combine into an adaptive cutting tool.
- Woodworking Plunge Saw: Left-bladed circular saw has a retracting blade that can start cutting anywhere on materials.
- Straight Edge Guide: The aluminum saw guide track ensures precise, straight, and splinter-free cuts.
- Secure Workshop Accessories: The anti-slip strips on the track saw guide secure material without clamps.
- Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check StockE. Emerson Tool Co. CXW-36 36-Inch Extra Wide All-In-One Contractor Straight Edge Clamping Tool Guide w/Story Stick
- Straight Edge - E. Emerson’s Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle..
- No C-clamping - No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools..
- Extra Wide - This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction-free cuts..
- Flat Top - The extra low profile and flat top makes it easier for all circular saw or router straight cuts..
- Contractor Series - Please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, and Stop Block. But it will not work with A, Twin, or Ultra Series accessories..
Check Stock
DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router
- INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
- ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
- 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
- BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
- Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
- When clamped, this solid guide shows no play and it tightly holds its grip.
- WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock
Saw Guide Tracks for Circular Saws (12 Feet) – Durable Cross Cut Guide for Making Straight Cuts! Lightweight, Easy to Assemble Guide Rails for Woodworking! (Stone Coat Countertops)
- INCLUDED IN THIS KIT - (3x) 47.75” Aluminum Saw Guide Tracks, (1x) Universal Circular Saw Mounting Plate, (1x) Mounting Hardware Pack.
- MAKE PERFECT CUTS – Convert your circular saw into a high-performance, track-guided cutting tool with the Saw Guide! Make perfectly straight cuts every time! Save time and money on your next project with woodworking accessories from Stone Coat Countertops!.
- DITCH YOUR TABLE SAW – No need to cut jumbo sheets of wood on a table saw! No need for an expensive crosscut sled! The Saw Guide will make your cuts cleaner, faster, easier, and more affordable!.
- NO MORE WASTED MATERIAL - The Saw Guide gives you a clean, smooth edge every time! Break down sheets of MDF or plywood with ease! Less wasted material means you save more money!.
- STRONG AND LIGHTWEIGHT – Aluminum Saw Guide Tracks are sturdy enough to stand up to any job! Lightweight enough to carry from one job site to the next! Great for woodworkers, professional contractors, remodelers, craftsmen, DIY enthusiasts, and so much more!.
Check StockBORA 50\ Ruled WTX Clamp Edge and Saw Plate Set for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 50 Inch Cutting Length | 545056K
- WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
- Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
- Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
- Clamp Edge includes ruled edge for easy measuring.
- Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
- Fits right- and left-handed circular saws.
Check Stock
BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500
- Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
- 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
- Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
- Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check StockBora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050
- GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
- CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
- LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
- AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock30'' Aluminum Clamp and Cut Edge Guide Fixture Clamping Cutting Guide Bar Handle Lock
- 30'' aluminum clamp and cutting edge guide.
- Clamp across boards to provide a firm straight edge for accurate circular saw cuts.
- 3 position cam lock action for strong hold.
Check Stock
Freud D0704DH Diablo 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw BLD,5/8 Arbor (Single Pack)
- ...The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
- Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
- Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of 3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
- What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
- saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5mm).
Check Stock
260mm Track Saw Square Right Angle Circular Saw Guide Rail Angle Stop Compatible with Festool and Makita Guide Rail
- EXCELLENT FEATURES: Designed to have standard right angle, this circular saw guide rail ensures higher accuracy for woodworking. Circular saw guide rail system can quickly and accurately set the slicing or milling angle, which can make precise and repeatable 90 degree cuts with the guide rail, no need to readjust, you can use it for daily use or work, which can give you for a perfect experience..
- UNIQUE DESIGN: 90 degree saw guide for circular saw has a hollow design, light in weight and compact in size, both the daily storage and carrying are very convenient..
- DURABLE MATERIAL: 340mm track saw square right angle is made of high-quality aluminum alloy and stainless steel material, which has a stable structure and is not easy to damage and bend, rustproof and durable for long term use..
- EASY TO INSTALL: 340mm right angle circular saw guide rail is easy to use, with simple installation and removal steps, you can complete the installation in just a few steps, whether you are a professional woodworker or a beginner, electric circular saw track is essential..
Check StockCircular Saw Electric Saws with Laser Guide 5000RPM 1500W Electric Circular Saw with 2 Saw Blades 24T+ 40T 0-45° Bevel Adjustment Ideal for Woodworking Construction and Renovation
- ✅【Laser Guaide & Scale Ruler】Circular saw has laser device and comes with a scale ruler. It is more convenient for users to do straight, precise....
- ✅【High Performance Motor】The 12-amp high-efficiency pure copper motor delivers powers up to 5000 rpm for more efficient and effective cuts on....
- ✅【Precise Cutting & Bevel Adjustment】Circular saw has a design that can adjust the cutting angle from 0-45°. This design allows the circular....
- ✅【Safty Button & Blower Port】 The safety button prevents accidentally turning on the circular saw. Circular saw is also equipped with a....
- ✅【WHAT WE PROVIDE】 1* Circular Saw, 2* high quality blade (24T for Wood/40T for Metal)7-1/2”, 1*Scale Ruler, 1* vacuum connector, 1* manual.....
Check Stock
GALAX PRO Saw Blade Set, Pack of 4 Assorted 60T HSS Metal/24T TCT Wood/Diamond 4-1/2-Inch Circular Saw Blade with 3/8\ Arbor for Fast Cutting…
- ...The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
- Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
- Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of 3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
- What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
- saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5mm).
Check StockBORA 4-piece NGX Compact Set
- Includes 24" NGX clamp edge, 25" NGX clamp edge extension with connectors, rip handle, saw plate.
- Made of heavy-gauge, rigid aluminum for extreme durability.
- For use with circular saws, routers, jig saws, and other portable power tools to achieve track saw like cuts.
- Can be used on right- or left-handed circular saws — no tools necessary to switch.
Check Stock
