Best Straight Flute Adjustable Reamer Bit
PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool
- Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
- Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
- Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
- Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
- Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stockuxcell 13.75mm-15.25mm Cutting Diameter HSS Adjustable Hand Reamer Milling Cutter
- Cutting Hole Size : 13.75mm-15.25mm/ 7/13.
- Square End Size : 6 x 6mm/ 0.2" x 0.2"(L*W).
- Total Size : 160 x 14mm/ 6.2" x 0.5"(L*Max.D).
- Package Content : 1 x Adjustable Hand Reamer.
Check Stock29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 1/2 " flute length, Partial Flute Length Carbide.
- 3/4 " shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 1/2 " flute length, Partial Flute Length Carbide.
- Morse taper shank #3, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 1/2 " flute length, Partial Flute Length Carbide.
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 3/8 " flute length, Partial Flute Length Carbide.
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 3/4 " flute length, Partial Flute Length Carbide.
- 1" shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 2" flute length, Partial Flute Length Carbide.
- Morse taper shank #4, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 7/8 " flute length, Partial Flute Length Carbide.
- Morse taper shank #4, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1-3/32 High Speed Steel Expansion Reamer Straight Flute Taper Shank
Check StockDrill America Bridge (Construction) Reamer 1\ Magnetic Hex Shank Bridge Reamer
Check Stock17/32 HSS Hand Reamers, Spiral Flute, Right Hand Cut, Michigan Drill Series 565
- Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
- Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
- Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check StockADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET
- Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
- Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
- Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock