Best Straight Flute Adjustable Reamer Set

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

• Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
• Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
• Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
• Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
• Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..

uxcell 13.75mm-15.25mm Cutting Diameter HSS Adjustable Hand Reamer Milling Cutter

• Cutting Hole Size : 13.75mm-15.25mm/ 7/13.
• Square End Size : 6 x 6mm/ 0.2" x 0.2"(L*W).
• Total Size : 160 x 14mm/ 6.2" x 0.5"(L*Max.D).
• Package Content : 1 x Adjustable Hand Reamer.

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 1/2 " flute length, Partial Flute Length Carbide.
• 3/4 " shank diameter, For Reaming abrasive material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 1/2 " flute length, Partial Flute Length Carbide.
• Morse taper shank #3, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 1/2 " flute length, Partial Flute Length Carbide.
• Morse taper shank #2, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 3/8 " flute length, Partial Flute Length Carbide.
• Morse taper shank #2, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 3/4 " flute length, Partial Flute Length Carbide.
• 1" shank diameter, For Reaming abrasive material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 2" flute length, Partial Flute Length Carbide.
• Morse taper shank #4, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

Prolinemax 14 Pc 0.124-0.501\ HSS Chucking Reamer Set Straight Shank Flute Decimal Sizes

• Sizes: 0.124'' 0.126'', 0.1885'', 0.1865'', 0.251'', 0.249'', 0.3115'', 0.3135'', 0.374'', 0.376'', 0.4365'', 0.4385'', 0.499'', 0.501''.
• Wooden Case Overall Dimension: 9-3/4''L 8''W x 1-1/4''H *Estimate Only*.

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 7/8 " flute length, Partial Flute Length Carbide.
• Morse taper shank #4, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

Drill America - DWRRTS1INCH 1\ High Speed Steel Taper Shank Straight Flute Chucking Reamer, DWR Series

• Durable: Made of premium high speed steel, with high hardness and good toughness, durable to use..
• 8 Sizes: 8 pieces HSS straight flute reamer, shank Diameter- 3/4/5/6/7/8/9/10mm..
• Cutting: With sharp cutting edge, the reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
• Application: Widely used for bore machining, installed in drilling machine, milling machine,and screw machines etc..
• 100% Satisfied Service: Enjoy a smooth & worry-free return service within a month. Any questions feel free to contact us, we will be here for you..

1-3/32 High Speed Steel Expansion Reamer Straight Flute Taper Shank

Drill America Bridge (Construction) Reamer 1\ Magnetic Hex Shank Bridge Reamer