Categories

Best Straight Jack Clamp

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Pro-Grip Straight Edge Clamps (24\ Clamp)

  • Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it instant accuracy for cross-cutting and routing..
  • Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable..
  • The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects..
  • Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play..
  • The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24" clamp..
Check Stock

BUNKER INDUST Farm Jack 48" with Jack Base Mate,High Lift Tire Jack Stand Plate Offroad 4x4 Sand Mud Snow Recovery Kit for Car Truck Jeep ATV SUV UTV

  • ...--The High Lift Farm Jack 48 inch all-cast jack is constructed with cast iron components for ultimate strength and durability. This jack is made of heavy duty solid steel construction, durable and sturdy to keep its shape.
  • 【High Quality Material】--Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware.Lifting jack base is rugged construction with durable ABS materials for strong strength and long durability.
  • 【Adjustable Farm Jack】--With quick release spring loaded pin, this jack allows you to set the height what you need. The maximum lifting height is 107CM.The largest capacity of high lift farm jack is 3Ton (7000LB).For greater safety, this lifting jack is equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.
  • 【Lift your 4WD out of any Situation】--High Lift Farm Jack 48" with jack base is more professional and better for off-road travelling. Lift, push, or pull equipment, small buildings ....
Check Stock

Bitzenburger Fletching Jig only, L-WING

  • 2000 STRAIGHT extra clamp for bitzenburger straight.
Check Stock

Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamps + 50” Extension + Saw Plate

  • Set includes a saw plate, 24-inch and 50-inch clamp edges, and 50-inch extension that can be attached to either clamp edge.
  • Ridged aluminum straight edge guides make straight, accurate track saw like cuts.
  • Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces.
  • Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 (89mm) inches wide.
  • Use the saw guide with your circular saw to cut with unmatched precision, or used for free hand cutting with the plate attached.
Check Stock

Hi-Lift XT-605 60' X-TREME Jack

  • The Hi-Lift Jack X-TREME jack is our top of the line, all-cast jack that includes many special features.
  • Unique gold zinc-coated winch/clamp/spreader attachment.
  • Charcoal Metallic powder-coated jack with gold zinc-coated handle and hardware.
  • Two piece handle and socket is durable and reliable, Safe use information stickers, including rated load details and operating instructions, affixed to handle.
  • Total length of the jack is 60", The rated load is 4,660 lbs. at 48 inches (2,660 lbs on the upper 12").
Check Stock

BUNKER INDUST Offroad High Lift Jack with Pair Traction Board Mate,48" FarmJack with Sand Mud Snow Track Mat Board,4x4 4WD Offroad Tire Recovery Kit for Car Truck Jeep ATV SUV UTV

  • ...and durability. This jack is made of heavy duty solid steel construction, durable and sturdy to keep its shape.The center of the Traction mat is specially designed with a jack base for emergency work, compatible with all jack.
  • 【High Quality Material】Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware.The traction mat is made of UV-stabilized, flexible, super tough engineering-grade reinforced nylon.
  • 【Adjustable High Lift Jack】With quick release spring loaded pin, this jack allows you to set the height what you need. The maximum lifting height is 107CM.The largest capacity of high lift farm jack is 3Ton (7000LB).For greater safety, this lifting jack is equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.The traction mat is 10 tons capacity on flat ground.
  • 【Lift your 4WD out of any Situation】High Lift Farm Jack 48" with Recovery Tracks is more professional and better for off-road travel....
Check Stock

BORA 100 WTX Clamp Edge and Saw Plate Set for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length | 545106K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge and Extension include ruled edge for easy measuring. Length-62.75 inch, Width-3 inch, Height-1.5 inch.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
Check Stock

BORA 50\ Ruled WTX Clamp Edge and Saw Plate Set for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 50 Inch Cutting Length | 545056K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge includes ruled edge for easy measuring.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
  • Fits right- and left-handed circular saws.
Check Stock

XtremepowerUS 5 Ton 2 Way Auto Body Clamp for Top & Straight Repair Tool Kit Self-Tightening Frame Pull Clamp Grips

  • Two-Way Pull Operation - The auto body repair pull clamp is compact, lightweight & exquisitely crafted, allows for two-way (Top & Straight) pull operation, capacity up to 5 tons (Straight Pulling) and 3 tons (top pulling).
  • Easy and Simple to Use - Self-tightening serrated jaws allow for a positive grip, both sides jaws with reasonable designed, which are different in order to fit the confined room.
  • Labor Saving Pull Clamp - The 2 Way self-tightening pull clamp can achieve a positive grip, and drop forged construction provides more pulling power, making it time and labor saving in the process of body repair for automotive car vehicle.
  • Heavy Duty Construction - Made of premium steel for high strength and durability, ensures long last using, this 5 ton 2 way pull clamp is specially designed for car body repair, especially use in narrow place.
  • Ideal Pull Clamp - Self-Tightening. The 2-way clamp will grabs minimum 1-1/2" of metal, making it ideal for hard pulls on heavy metal or frame.
Check Stock

BORA WTX Ruled Clamp Edge Saw Guide 50 Inch Length Rail for Circular Saws Cutting Track for Woodworking Contractors DIY 545050

  • Time Saver: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with....
  • Fast Set-Up: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting.
  • Long Cutting Length: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase....
  • Ruled Straight Edge: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always....
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to....
Check Stock

Stark USA 2-Way Frame Back 3 Ton Self-Tightening?g Grips & Auto Body Repair Pull Clamp Top & Straight Repair Tool Kit

  • Ideal Pull Clamp - Self-Tightening. The 2-way clamp will grabs minimum 1-3/8" of metal, making it ideal for hard pulls on heavy metal or frame.
  • Easy and Simple to Use - Self-tightening serrated jaws allow for a positive grip, both sides jaws with reasonable designed, which are different in order to fit the confined room.
  • Two-Way Pull Operation - The auto body repair pull clamp is compact, lightweight & exquisitely crafted, allows for two-way (Top & Straight) pull operation, capacity up to 3 tons (Straight Pulling) and 2 tons (top pulling).
  • Labor Saving Pull Clamp - The 2 Way self-tightening pull clamp can achieve a positive grip, and drop forged construction provides more pulling power, making it time and labor saving in the process of body repair for automotive car vehicle.
  • Heavy Duty Construction - Made of premium steel for high strength and durability, ensures long last using, this 3 ton 2 way pull clamp is specially designed for car body repair, especially use in narrow place.
Check Stock

Norco Professional Lifting Equipment 76412A Heavy Duty 12 Ton Standard Bottle Jack

  • Multi-functional farm jack is great for lifting tractors or heavy trucks, pulling posts and poles, and even serves as an all-purpose hoist or winch.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
  • Adjustable top-clamp clevis can clamp at any position on the upright steel standard. Wide base prevents the jack from sinking into soft surfaces such as asphalt.
  • Paint is oil, grease and dirt-resistant for easy cleanup. Lifting handle has a rubberized grip for comfort and better grip.
Check Stock