Categories

Best Straight Pipe Tap

Hand Pipe Tap Set Drill Taper NPT 1 Inch Steel Bits Tool for Machining Thread with Plastic Box 1PCS,Tap

  • Hand Pipe Tap Set are designed to clean and re-thread damaged or Jam Pipe threads.
  • Hand Taper Set allows chips to collect in the Flutes and are well suited for most applications.
  • Drill Taper Sets have an action that engages when they are run in a clockwise direction.
  • Pipe Tap Taper, sizes 1"-11-1/2 NPT carbon steel Pipe taps in plastic pouch case.
  • Drill Pipe Tap Set feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock

MOTOKU New HSS 1/16-27 NPT Taper Pipe Thread Tap

  • Cuts internal threads in pipes. Ideal for pipe fittings..
  • Nominal size of the tap is that of the pipe fitting being tapped.
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP).
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA..
Check Stock

HEATIT Mobile Home 100-feet HEATIT HTM Braid Self Regulating heating cable Water Line Freeze Protection

  • ...ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional..
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape..
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow..
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water..
Check Stock

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • ...adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and tangent chart, this pipefitter tool can help you make straight lines around pipes. When judging the horizontal state, the bubble of the green liquid needs to be in the middle of two lines on the protractor. 【Note:】When determining the angle, the bubble of the green liquid should be in the horizontal position whatever the angle is..
Check Stock

Pipe Thread Tap High Speed Steel for Cast Iron Alloy Steel HSS G1/2-14 Pipe Thread Tap Cutting Tools

  • SCOPE OF APPLICATION: This tap is suitable for stainless steel, iron, cast iron, alloy steel, carbon steel, abrasive steel and other....
  • INFORMATION OF PRODUCT: The thread specification is G1/2in, the tap length is 8cm, and the useful length of the tap is 3cm. The shank diameter is....
  • WITH HIGH HARDNESS: Pipe Thread Tap is made of highspeed steel material, with high hardness, can be cut very well..
  • EXELLENT PERFORMANCE: This G1/2 Pipe Thread Tap is convenient to use and with good performance, with small size, easy to carry and store..
  • RELIABLE & DURABLE: Strict quality control and quality assurance, high safety factor, can be used with peace of mind..
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

RIDGID 40220 461 Straight Pipe Welding Vise, 1/2-inch to 8-inch Pipe Welding Clamp,Red,Small

  • Designed for secure clamping onto straight pipes.
  • pipe welding vise is available in straight, angle, elbow and flange styles.
  • Constructed of durable, performance-proven material for reliable, long-lasting use.
  • Straight welding vise resists strain, heat and warping during tacking.
  • Machined swivel nuts and pins combined with special chain screws allow for smooth, trouble-free vise assembly onto the pipe.
  • Straight pipe welding vise has a 1/2-inch to 8-inch (15 mm to 200 mm) pipe capacity.
Check Stock

HSCGIN Wall Split Flange 2PCS Stainless Steel Round Escutcheon Plate Floor and Ceiling Plate Cover Split Flange for 28mm Dia Pipe 25 Type Silver

  • Material stainless steel, 304 stainless steel..
  • Convenient installation: the radiator tap cover can be directly installed on the tap hole of the installed pipe, without removing the pipe. This split protective cover provides great comfort..
  • Wide range of applications: different sizes of rose blankets can be widely used in air pot extractors, gas boiler extractors, vents, sewage pipe holes, air conditioning holes, faucet valves, washing machines, bathrooms, toilets, dishwashers and urination Pool flush valve, etc..
Check Stock

HNHYNSY PVC Elbow Joint Water Pipe Joint Irrigation Pipe Fitting Socket Joint Adapter 5 Pieces PVC Pipe Joint Inner Diameter 20~110 Mm Water Pipe Elbow (Color : Gray, Diameter : 63mm)

  • This product has many colors and different colors can be matched for different purposes. White can be used to transport tap water, gray can be used to discharge sewage, and blue can be used to transport fish tank water..
  • There are many sizes, many choices, and different types of water pipes can let you choose with confidence.
  • The elbow is 90°, the inner wall of the surface is smooth, the resistance is small, and the water pipe can be easily transferred.
  • Made of PVC hard rubber, environmentally friendly and practical, wear-resistant and durable.
  • Suitable for sewage pipe transfer, tap water pipe transfer, fish tank water pipe transfer, irrigation water pipe transfer.
Check Stock

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
  • Set contains matching NPT pipe tap and high speed steel drill bit.
Check Stock

Tapology Micro Foaming Beer Tap System - Silver

  • ON TAP BEERS AT HOME: Tapology allows you to create dense micro foam heads from your home. Happy hours will now be moved to your house..
  • ENHANCED FLAVOR: Beer from the tap helps enhance the flavor and aroma of your beer. Tapology allows a fresh straight from the tap experience..
  • ANY BEER: Tapology works with 12 ounce cans so grab your favorite can and have a luxury beer from home..
  • PORTABLE: Tapology is a portable and lightweight battery operated micro foaming beer tap system. This means you be bring that straight from the tap taste wherever you go..
Check Stock