Best Straight Shank Bridge Reamer Set

High Precision Industrial Grade Spiral Reamer 1:10 Hss Steel, Conical Handle Hinge Hinged Die Processing Tool 8 X 12 X 40mm

• Shank diameter: 3,4,5,6,7,8,9,10mm, machining hole size and shape can be suitable for different componets.
• Features: The sawing edge of the reamer set of the chuck machine is sharp, the sawing ability is strong, the precision is high, and the sawing is clean.
• Easy to use: Straight shank machine reamers can be installed on drilling machines, milling machines, etc.
• Application: The H8 reamer set can process the surface of metal materials such as iron, steel, plastic, wood, copper, aluminum, etc.
• Durable: The reamer set is made of high-speed steel, with high hardness, good toughness and long service life.

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

• The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
• Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
• The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
• The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
• Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

• Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
• Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
• Size Infor: Length of chucking reamer is 6.5 inch.
• Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
• Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.

Drill America 15/16\ Bridge/Construction Reamer with Magnetic Hex Shank and Black and Gold Finish, KFD Series

• Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation. Black and gold Killer Force (KFD) hex shank bridge reamers are manufactured from premium grade high speed steel..
• Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
• Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.

Drill America Bridge (Construction) Reamer 15/16\ Magnetic Hex Shank Bridge Reamer

Bridge (Construction) Reamer 9/16\ Extra Long Magnetic

Drill America DWRRB15/16HEX - DWRRB-Series Bridge Reamer, Reamer Type: Bridge, Reamer Diameter: 15/16\

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

• Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
• M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
• Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
• Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
• Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..

Drill America 7/8 Bridge/Construction Reamer with Magnetic Hex Shank DWR Series

• Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation.
• Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
• Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.

Drill America 13/16\ Bridge/Construction Reamer with Magnetic Hex Shank, DWR Series

• Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation.
• Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
• Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.

4Pcs Drill Bridge/Construction Reamer Bit Set 3/8 1/2 5/8 3/4 with 1/2 Shank HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole with Aluminum Box

• What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
• Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
• Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
• Includes: 3/8" (fits 3/8'' shank collets), 1/2", 5/8" and 3/4" (fits 1/2'' shank collets).
• Design: Tapered point design allows reamer bits to enter irregularly overlapping holes, aligning bolt holes.
• three symmetrically placed flats on shank provide a secure grip for portable power and air tools.

Prolinemax 14 Pc 0.124-0.501\ HSS Chucking Reamer Set Straight Shank Flute Decimal Sizes

• Sizes: 0.124'' 0.126'', 0.1885'', 0.1865'', 0.251'', 0.249'', 0.3115'', 0.3135'', 0.374'', 0.376'', 0.4365'', 0.4385'', 0.499'', 0.501''.
• Wooden Case Overall Dimension: 9-3/4''L 8''W x 1-1/4''H *Estimate Only*.

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

• Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
• Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
• Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
• Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
• Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..