Categories

Best Straight Shank Tapered Reaming Bit

MK Morse 116244-MKM 050326116244, multi, one size

  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

FTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

Accusize Industrial Tools Over and Under Sizes 0.1240'' Thru 0.5010'' HSS M2 Premium Chucking Reamer Set, Right Hand Cut, 14pcs/Set, 5528-SX00

  • Over & Under Sizes — 0.1240" thru 0.5010".
  • Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
  • They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
  • Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.
Check Stock

Accusize Industrial Tools 29 Pc Set 1/16 to 1/2 inch by 1/64 in HSS M2 Premium Chucking Reamers Straight Flute Aluminum Case 5528-SF00

  • 29 PC Set: 1/16'' through 1/2'' By 64ths, Fractional size.
  • Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
  • They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
  • Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

HIGHFIRE 10 Pieces Hex Shank Drill Bit Set for Impact Driver, HSS Twist Titanium Drill Bits for Metal, Hex Drive Quick Change Drill Bits Set

  • Sizes and Package - Drill bit sizes include: 1/16"*2, 3/32", 1/8"*2, 5/32", 3/16"*2, 1/4",3 /8". 10 PCS drill bit set in a double blister pack with easy opening design..
  • Sharp Cutting Edge - HIGHFIRE hex shank drill bit set has accurate tip geometry which ensures cutting edge sharp and strong. 135 degrees split point tip provides a no-walking drilling start on working surface..
  • Hex Shank Bits- Hex shank drill bits fit in quick-change impact drivers. Hex shank eliminates shank spinning in chuck when using pressure..
  • Solid Connection and Tapered Web - The strong connection of drill bits and shank transits high torque from drills to the tip of the drill bit without breakage. It also decreases radial runout to make the hole rounder. HIGHFIRE hex shank drill bits with tapered web design increases strength and reduces breakage..
  • Twist Flute and Titanium Coating - With optimized flute form, HIGHFIRE drill bit decreases friction and heat easily to ensure fast drilling and a long working life. 35-degree twist flute helps to remove chips quickly. TiN coating extends drill bits life 3 times longer..
Check Stock

Diamond Drill Bit, 5Pcs Hole Opener Drill Bit Electric Power Tool for Vitrified Brick/Stone/Marble/Granite/Concrete/Glass/Ceramic Tiles(12)

  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
Check Stock

Barb Drill Bit, Tapered Hole Drilling 4-32mm Multiple Sizes HRC58-65 for Metal Plastic Wood Plates

  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock

Pana Professional USA Gold TAPERED Barrel Bit Nail Drill (Grit: EXTRA FINE - XF) 3/32' Shank Size

  • Pana Professional USA High Quality Gold TAPERED Barrel Bit Nail Drill (Grit: EXTRA FINE - XF) 3/32" Shank Size.
  • Fit 3/32" Shank Size, Grit: EXTRA FINE - XF, Barrel: TAPERED.
  • 100% Brand New USA High Quality Gold Bit.
  • Suitable for Professional, Salon, or Home use.
  • No Clogging, Resistance of Acid, Alkali and Heat.
Check Stock

5Pcs Woodworking Drill Bit Hole Opener, Self-Centering Hole Sawing Machine, Adjustable Hinge Reamer Tool Set (15Mm, 20Mm, 25Mm, 30Mm, 35Mm)

  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58-65 hardness, wear resistant and durable..
Check Stock