Categories

Best Straight Side Forging Press

4 Pieces Set of 7.5 and 8.5 and 9 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife Set, 3 to 4.5 inches Cutting Edge, Compact Pocket Knife Blanks

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 33 inches Damascus steel blade..
  • Set Contains: a) 9" long straight back blade with 4" cutting edge. 3 pins holes and a Mosaic hole. b) 8.5" long trailing point blade skinning knife with 3.5" cutting edge. 3 pin holes and a Mosaic hole. c) 8.5" long pocket drop point blade with 3.5" cutting edge. 3 pins holes and a Mosaic hole d) 7.5" long compact trailing point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Tswofia Sublimation Tumblers 20 oz Skinny, 24 Pack Straight Tumblers Sublimation Blanks Bulk, Individually Gift Boxed, Stainless Steel Insulated Sublimation Tumblers Cup White

  • GREAT FOR SUBLIMATION: With sublimation coating, our 20 oz sublimation tumblers have brighter sublimation color. Add the pictures or design or logo to the sublimation tumbler 20 oz skinny straight and customize your special cup. Perfect for heat press or oven..
  • INDIVIDUALLY BOXED: The 20 oz sublimation tumbler blanks are individually boxed. Gift-ready and delicated packaged . Also, we have provided extra accessories: 24 shrink film, 24 straws and 24 straw brushes..
  • STRAIGHT BODY: The sublimation blanks 20 oz skinny is completely straight (same diameter with top and bottom), not tapered. You can easily make a full wrap around the tumbler and make a perfect sublimation..
  • PREMIUM QUALITY: Made of 304 18/8 stainless steel, the sublimation skinny tumbler is highly durable and resistant to break and rust. With double walled vacuum insulation, the sublimation tumbler bulk can keep your beverages hot for 5 hours and keep cold for 12 hours..
  • TWO WAYS TO SUBLIMATE: If you choose heat press machine to sublimate your tumblers, set temperature to 330 F for 30 seconds and rotate to the other sid....
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Leathercraft Flatten Plier Clamp,Leather Edge Adjustment Press Flatten Plier for Bag Belt

  • STEEL MATERIAL: The Leathercraft Flat Plier adopted of good quality steel forging, quenching heat treatment, high hardness, good toughness, having long service life..
  • STRONG BITE FORCE: This leather plier features strong bite force, the jaw is polished and flat, tight, and help you save labor and time..
  • IDEAL FOR: The Flatten Plier is ideal for leather products, such as wallets, handbags, bags, etc..
  • WIDELY USED: This leather edge adjustment press flatten plier is widely used in leather making and flatten..
  • FOR DIY: This Leather Edge Adjustment Press Flatten Plier is easy and safe to use, is a great tool for DIY leather craft lover..
Check Stock

8 Pack Straight Sublimation Tumblers Set 20 Oz Skinny, Stainless Steel Skinny Sublimation Tumbler Blank With Shrink Wrap Film Lid Straw Set,Individually Boxed, Not Tapered

  • GREAT FOR SUBLIMATION: With sublimation coating, our 20 oz sublimation tumblers have brighter sublimation color. Add the pictures or design or logo to the sublimation tumbler 20 oz skinny straight and customize your special cup. Perfect for heat press or oven..
  • STRAIGHT BODY: The sublimation blanks 20 oz skinny is completely straight (same diameter with top and bottom), not tapered. You can easily make a full wrap around the tumbler and make a perfect sublimation..
  • INDIVIDUALLY BOXED: The 20 oz sublimation tumbler blanks are individually boxed. Gift-ready and delicated packaged . Also, we have provided extra accessories: 8 shrink film, 8 straws and 8 straw brushes..
  • PREMIUM QUALITY: Made of 304 18/8 stainless steel, the sublimation skinny tumbler is highly durable and resistant to break and rust. With double walled vacuum insulation, the sublimation tumbler bulk can keep your beverages hot for 5 hours and keep cold for 12 hours..
  • TWO WAYS TO SUBLIMATE: If you choose heat press machine to sublimate your tumblers, set temperature to 330 F for 30 seconds and rotate to the other side f....
Check Stock

GLAMFIELDS Toe Nail Clipper for Ingrown or Thick Toenails, Sharp Toenails Trimmer and Professional Podiatrist Nail Nipper for Seniors with Easy Grip Rubber Handle (Shrimp-black)

  • Professional Grade Toenail Tool: Our straight edge toenail clipper won’t just work properly on hard,thick and ingrown nails but will also help you avoid spending money on a pedicure salon and maintain proper grooming habits from the comfort of your house..
  • Hand Forging Process：All FERYES nail clipper has been hand-forged through multiple processes, they are durable, heavy duty, strong and sharp allowing you to get superior results every time..
  • Sharp Straight Blades: The completely straight blade can clip deep into the ingrown groove, perfect for users with severe paronychia or ingrown nails. At the same time, this nail clipper can also trim the horizontal nails recommended by the podiatrist..
  • Optimum Cutting Performance: Our nail clipper cuts cleanly in one movement.
  • Fitted safety cover reduces risk of injury when tool is stored while also maintaining the tool in peak condition..
  • RISK-FREE PURCHASE: FERYES offers 100% satisfaction in our hassle-free Replacement Guarantee. We award life-time warranty and provide full customer supporting service, so you can purchase our product without any hesitation and worry..
Check Stock

IWS-1632AF Copper Tubing Press Tool for 1/2 3/4 1 Viega ProPress Copper Fittings

  • Good for Viega ProPress, Elkhart, Conex copper fittings..
  • C/W 1/2", 3/4", and 1" interchangeable jaws.NOT FOR CORNER OPERATION..
  • 360 degree rotatable head for easy access..
  • A labor saving tool for copper pipe connection, not for PEX pipes..
  • Forging craft promises jaws to give pipe fittings an accurate press without scratches.
Check Stock

uxcell 2 Pcs 8-Inch Stainless Steel Straight Blunt Tweezers with Serrated Tip Daily Garden Tool

  • APPLICATION: Used for picking small parts, replace electronic parts, cleaning out a garden or fish tank, planting succulents,manual work, and more..
  • With serrated handles for better control. Style: Tapered Straight Blunt Tip.
  • Advantage: stainless steel forging, good elasticity, not easy to deform. The surface is polished, resistant to abrasion, high temperature and corrosion, suitable for operation and use under a variety of extreme conditions..
  • Note: The tweezers are formed by cold working (stamping). Due to the production process, the tweezers will be slightly magnetic.
Check Stock

Easydiy 110 V Portable Tumbler Heat Press Machine Green Mug Machine for 30 OZ 20 OZ 16 OZ Straight Sublimation Blanks Skinny Tumbler 15 OZ 11 OZ Sublimation Ceramic Mugs DIY Heat Transfer Print

  • ... can be stored in your bag if you want to take it out for outdoor DIY making. It is easy to store and doesn't take up lots of space..
  • 【EASY to Use】The tumbler press machine is easy to use and store, you can sublimation print the 11 oz or 15 oz sublimation ceramic mugs 2 pieces at one time, and it's can print the straight sublimation tumbler in various sizes. The diameter range is 2.83-3.43 inches..
  • 【Specification】The tumbler heat press machine is 110 V, 500W, and the heat press attachment length is 27 CM/10.6 Inches. The 30 OZ tumbler press machine temperature range is 0-482℉/ 0-250℃, and the time range is 0-999 Seconds..
  • 【Tips for Sublimation】Twist the screw to adjust the diameter of the attachment for different tumblers and cups. For the Sublimation of ceramic mugs, the recommended temperature and time are 360 F and 180 S. For the Sublimation of stainless steel tumbler cups mugs, the recommended temperature and time are 360 F and 60 S, if your print design is for full-width printing, we suggest you print one side first and then rotate to print the other side..
  • 【Special Gift】This mug press is a good choice for giving as a present, people who receive this gift can customize their own cup, it is much more meaningful, printing your favo....
Check Stock

NACHI Piston Pump

  • 1.A10VO series of axial piston pump will have 35 MPa pressure pure hydraulic oil input to all kinds of hydraulic press, hydraulic motor and hydraulic system, to generate huge motivation.
  • 2.This pump can be used as a hydraulic motor..
  • 3. According to the needs, this pump has a variety of variable form. The oil pump, oil motor is widely used in ship, aviation, mining, metallurgy, casting, forging, machine tool of all kinds of machinery.
  • 4. ts characteristic is small in volume, high efficiency, long service life, advanced design, compact structure, convenient maintenance..
  • 5.We will arrange the faster express to deliver your order with free shipping（ DHL UPS FEDEX TNT EMS ）,you will receive it within 7~10days.
Check Stock

PC Cooler C81H Slim CPU Cooler Turbo Blower Cooling Fan for 1U Server/HTPC Intel CPU Socket LGA1156 / LGA1155 by Tekit,4Pin PWM Turbo Fan Utral-Thin 29mm

  • The slim long life ball bearing fan. 10mm slim design, ball bearing, longer life(5000 hours)..
  • Cold Forging technology, efficient heat dissipation. Cold forging is a cold working process by which the original metal material is forging shaped by forging machine at normal temperature. Cold forging technology radiator, with the characteristics of large cooling area, high density and purity, etc.,the effect of heat disppation is better..
  • Product Dimensions: 90.5(L)x90.5(W)x29(H)mm Weight: 213g Rated Voltage: 12V DC Rated Current: (0.2 to 0.36) ±0.02Amp.
  • Air Flow: 18 to 27 CFM Fan Size: 7cm Noise Level: (28 to 50) dBA±10% Fan Speed: (3000 to 5000)RPM±10% Bearing Type: Two Ball Power Connector: 4-pin.
  • Support Intel Sockets: LGA1155/1156: Core i7, Core i5, Core i3, Celeron, Pentium.
Check Stock

IWISS Angle Head F1807 PEX Pipe Crimping Tool for Copper Rings - 1/2&3/4&1-inch Three Crimper Set with Cutter

  • 【Features】For 1/2”, 3/4”, 1” copper tubing pressing..
  • Automatic locking of pressing tongs. 360-degree rotating head.
  • Forging craft promises jaws to give pipe fittings an accurate press without scratches..
  • 【Ergonomic Design】Extendable handles for improved leverage. Creates leak-free connections, No more brazing, soldering or flaring. Ergonomic handle design and comfortable handle can minimize user fatigue..
  • 【Cutter & Deburring Tool】The cutter can quickly and easily obtain clean rounded cuts on pipes with outer diameter of 1/8" -1 1/4".
  • Deburring tool with high-quality speed steel 360 degree rotary mounting head.
  • Practical tools to make your project easier..
  • 【Wide Application】Compatible with Viega Copper, Pro-Press, Elkhart, Conex Pipe Fittings..
Check Stock

Pivoting Bit Holder Magnetic Pivot Drill Bit Holder Quick Release Flexible Screwdriver Bit Holder for Tight Spaces or Corners

  • The head pivots up to 20 degrees for use in corners or tight locations.
  • Can be used in straight or pivot mode by adjust the locking collar.
  • Pivoting bit tip holder features a 1/4 inch hex shank allows for use in any chuck or electric drills.
  • Built-in strong magnet, can be quickly connected to the 1/4 inch hexagon shank bit and socket.
  • Chrome vanadium steel forging, high hardness and high torque, surface plating, not easy to rust.
Check Stock