Categories

Best Strength Thread

TOPINCN Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing Thread Master Repair Kit M6 x 1.0 x 8.0mm 25pcs

  • Made of high‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners.
  • Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can significantly improve thread strength and wear resistance.
  • Form a high‑strength, wear‑resistant, high‑accuracy standard female thread when you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials.
  • Wire thread inserts can be used to convert between and inch thread holes, which is convenient and fast.
  • When a thread error occurs or a damaged female threaded hole is repaired, threaded insert can be used as a repair method. Repairing the threaded hole in a cost‑effective manner.
Check Stock

Self Tapping Inserts Self Tapping Threaded Inserts 50pcs Brass Slotted Thread Inserts Self Tapping Thread Slotted Inserts Pressed Fit into Holes

  • 【Self Tapping Capability】: This self tapping thread insert has self tapping capability, so you don’t need to tap in advance, you can directly screw it into the reserved hole.
  • 【Strong Tensile Strength】: This threaded insert embedment nuts has strong tensile strength and large contact area with the finished product.
  • 【Can Prevent Loosening】: This brass slotted thread inserts are easy to install, it have strong shock resistance, which can effectively prevent loosening.
  • 【Improve the Thread Strength of the New Product】: This self tapping thread slotted inserts can effectively improve the thread strength of the new product.
  • 【7 Types, A Total of 50】: This brass threaded inserts has 7 commonly used types, a total of 50, which can be used for a long time.
Check Stock

50pcs Helical Threaded Inserts Stainless Steel Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 1.5D Length

  • WIDELY USED:Stainless steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • USED FOR PARTS:Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • A CERTAIN ELASTICITY:Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resista.
  • ADVANTAGE :It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance..
  • EASY TO MAINTENANCE:Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
Check Stock

E-Z LOK 319-4 Insert 1/4-20 Int. Coarse Thd., 3/8-16 Ext. Thd., .375 Lg., Thinwall, Steel

  • Important Parameters: Size: M6(inner diameter) x 1.0(installed pitch) x 3D(installed length=3*6mm=18mm), outer diameter: 7.6mm(Min.).
  • 7.9mm(Max.), suitable drill bit diameter is 6.3mm..
  • Function: Steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • Easy to Maintenance: Install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • Excellent Performance: Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance..
  • Usage Scenario: These threaded inserts are Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread. It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
Check Stock

Threaded Rod, Carbon Steel, 1/2-20x1 ft

  • Price For: Each Basic Material: Steel Fastener Finish: Plain System of Measurement: Inch Material Grade: Low Carbon Rockwell Hardness: B85 to B97 Fastener Thread Direction: Right Hand Item: Threaded Rod Yield Strength (PSI): 45, 000 Thread Class: 1A Fastener Thread Type: UNF Dia./Thread Size: 1/2"-20 Tensile Strength: 60, 000 psi Overall Length: 1 ft..
  • Country of Origin (subject to change): United States.
Check Stock

iexcell 850 Pcs M3 x 4/5/6/8/10/12/14/16/20/25/30 Stainless Steel 304 Hex Socket Head Cap Screws Bolts Assortment and Nuts Kit

  • 425 Pcs M3 Hex Socket Head Cap Screws, Thread Pitch 0.5 mm, Thread Size Diameter 3 mm ( Range: 2.927 ± 0.053 mm ).
  • Material: Stainless Steel 304, High Strength and Anti-corrosion in Various Conditions.
  • Single Thread Size, Multiple Thread Lengths: The Thread Size Diameter of All Screws in This Kit is the Same 3 mm ( Range: 2.927 ± 0.053 mm ), Thread Lengths are Multiple from 4 to 30 mm: M3 x 4, M3 x 5, M3 x 6, M3 x 8, M3 x10, M3 x 12, M3 x 14, M3 x 16, M3 x 20, M3 x 25, M3 x 30.
  • 425 Pcs M3 Hex Nuts, Thread Pitch 0.5 mm,to Meet Different Applications.
  • 1 Pcs Hex Key, Hex Size: 2.5 mm, to Drive These Screws Conveniently and Easily.
  • Material: Chrome-Vanadium Steel and Nickel Plated: Higher Strength and Anti-rust.
  • Package: 425 Pcs M3 Hex Socket Head Cap Screws, 425 Pcs M3 Hex Nuts and 1 Pcs Hex Key Come in a 15-grids Organizer Box, Organized Conveniently and Easily.
Check Stock

Reducer Nut, Industrial Accessory Threaded Bushing Screw Hole Repair Thread Protection Tool for Industrial Supplies

  • The thread repair socket is made of stainless steel, which has high strength and is not easily deformed during the thread repair process..
  • The wire thread insert set is fitted in the screw hole of the metal workpiece to form a high‑strength and high‑accuracy standard female thread..
  • This socket is a cost‑effective repair tool when threading errors or repairing damaged female thread holes..
  • Maintenance nuts are mainly used in aviation, automobiles, lamps, molds, mechanical equipment and other manufacturing fields..
  • The wire thread insert can be used to switch between metric and inch threaded holes, which is convenient and quick..
Check Stock

50Pcs Nut Inserts Wire Thread Insert Sleeve Bushing Screw Protective Coil Screw Repair Nut Kit Thread Locking Inserts M10 x 1.5(2D)

  • The wire threaded sleeve is female thread fastener with certain elasticity, which can enhance the connection strength of the thread..
  • It is convenient and quick to use wire thread inserts to convert metric one to one inch threaded holes. The thread size is standard, the thread is clear, and it will be more accurate for thread sliding tooth restoration..
  • Fit the wire screw set in the screw hole of the workpiece such as aluminum alloy to form a high-strength, wear-resistant, high-precision standard internal thread. 304 stainless steel has good corrosion resistance and is not easy to break when repairing thread holes..
  • The screw sleeve can be used to convert between metric and imperial thread holes, which is convenient and fast..
  • When there is a thread processing error or a damaged internal threaded hole is repaired, the threaded hole can be repaired economically and effectively by using the wire thread insert as a repairing method. The repair nut is mainly used in aviation, automobiles, lamps, molds, mechanical equipment and other manufacturing fields..
Check Stock

50PCS Threaded Inserts,Self-Tapping Thread Insert,M3-M12 Thread Reinforce Repair Tool Self Tapping Thread Inserts Set for Plastic Copper

  • SUITABLE: The self-tapping thread insert is a kind of fastener that strengthens the thread, which can form a high-strength inner thread hole when embedded in a soft material such as plastic, copper. It can also be used to repair the damaged inner thread..
  • MATERIAL: Made of high quality stainless steel, it is of high hardness and low abrasion,Greatly improve strength and stability of screws connection.
  • ADVANTAGE: With certain elasticity and even load, it is resistant to vibration to avoid loosening,Long service life - it can be used repeatedly..
  • QUICK TO INSTALL: Easy and quick to install with only one assembly tool..
  • INSTALLATION METHOD: The self-tapping screw sleeve installation does not need to be threaded in advance. It can be directly screwed into the specific hole reserved for the base material with the installation tool. The same screw as the original can also be used for the female thread of the broken tooth. It is economical and beautiful. For new products It can also increase the thread strength.
Check Stock

Threaded Rod, Steel, 7/16-20x3 ft

  • Price For: Each Basic Material: Steel Fastener Thread Direction: Right Hand Item: Threaded Rod Meets/Exceeds: ASME B18.31.3 Tensile Strength: 115, 000 to 125, 000 Rockwell Hardness: C35 Overall Length: 3 ft. Temp. Range (F): Not Rated Fastener Thread Type: UNF Fastener Finish: Zinc Yellow Material Grade: B7 Dia./Thread Size: 7/16"-20 System of Measurement: Inch.
  • Yield Strength (PSI): 95, 000 Country of Origin (subject to change): Multiple.
Check Stock

AK Trading 4-Pack WHITE All Purpose Sewing Thread Cones (6000 Yards Each) of High Tensile Polyester Thread Spools for Sewing, Quilting, Serger Machines, Overlock, Merrow & Hand Embroidery

  • ALL PURPOSE THREAD - 4 Cones of Polyester Threads for Sewing Quilting Serger Color as shown. Over 30 colors in stock. This thread is great for serge machines since you get 4 cones of the same color as required by many serge machines..
  • GOOD QUALITY - High Quality, High Tensile Strength, Low Lint Thread. 100% Polyester Spun. it will not be fray or break easily. This high-quality thread is perfect for sewing efficiently..
  • IDEAL WEIGHT & LENGTH - Each Cone is 6000 yards. You will receive total of 24000 yards. Each spool has 40 weight (most commonly used) which makes these spools ideal for all sorts of embroidery projects – The threads are ideal for Brother, Babylock, Janome, Singer, Pfaff, Pegasus, Juki, Husqvarna, Bernina and all other types of sewing machines..
  • WIDE APPLICATION - Good for any home or Commercial Machine. Use for Serger, Over lock, Merrow, single needle etc. The sewing thread can be used for a variety of sewing machines or embroidery machines which with automatic winding function. The thread set to keep your sewing project simple, practical and user-friendly, whether you're a professional or a beginner. It could fulfill most of your home use project needs..
  • SUPERIOR STRENGTH - Will not Break at High Speed Machines. Our embroidery machine t....
Check Stock

iExcell 100 Pcs M5 x 10 mm Alloy Steel 10.9 Grade Hex Socket Button Head Cap Screws Kit Black Oxide Finish

  • ✔ Includes 100 Pcs M5 x 10 mm Hex Socket Button Head Cap Screws, Thread Diameter: 5 mm, Thread Length: 10 mm, Thread Pitch: 0.8 mm.
  • ✔ Strength Grade: 10.9 Grade, Hardness: HRC 32-39, Tensile Strength: 1040N/mm².
  • ✔ Material: Alloy Steel, Black Oxide Finish: High Strength and Anti-rust.
  • ✔ Includes 1 Pcs Hex Key, Hex Size 3.0 mm, to Drives These Screws Easily.
Check Stock

ABN Professional Thread Repair Kit - 131pc SAE Drill Thread Restorer Kit for Restoring External or Internal Screw Holes

  • [Restore Stripped Screws]: Repair stripped threads with the ABN Thread Repair Tool Set.
  • 131pc long rethreading kit is ideal for repairing 1/4, 5/16, 3/8, 7/16, or 1/2-inch internal or external screw holes.
  • [Use for Any Job]: Fix up your engine or restore automotive wear and tear with the rethreading tool kit.
  • Complete any drilling, tapping, and tang removal jobs with the thread chaser set.
  • [Carry With You Anywhere]: Spark plug thread chaser and bolt hole thread repair kit comes in a steel case to keep all 131 pieces neatly organized and labeled for your convenience.
  • Lightweight 5lb (2.3kg) case is easy to transport between job sites and takes up little room making it easy to store.
  • [Rely on Maximum Strength]: Thread fixer tools are constructed of chrome vanadium steel to withstand repeated use and to help prevent corrosion.
  • Inserts are heat-treated for long-lasting strength.
  • [Package Details]: Bolt thread cleaner tool standard thread repair kit includes 5 twist drills, 5 screw taps, 5 installation tools, 5 breaking pin tools, 111 thread inserts, and a carrying case.
Check Stock