Categories

Best Strobe Brake Lights

Eagle Lights Flashing Strobe LED Tail Brake Light Kit for Harley Davidson Tri Glide Models

  • FLASHING STROBE BRAKE LIGHTS - The 8900TL5 tail lights have a built-in flashing brake light to take your safety to the next level. The lights connect directly to your Harley Davidson motorcycle and require no programming or wiring for the flashing brake light function. Once the brake is activated, the lights will flash rapidly 3 times and then turn a bright red..
  • READY TO ROCK - The LED tail lights are ready to be installed right out of the box. The harness from the lights plug directly into your Harley Davidson motorcycle's harness. They feature and include running lights and flashing brake lights. No load resistors are required for installing the brake lights. The 8900TL5 brake lights are compatible with the Harley Davidson on board computer..
  • DIRECT REPLACeMENT - Designed to directly replace the stock rear tail lamps on HD 2009 - Current Tri-Glide and 2010-2011 Street Glide trike models...
  • EAGLE LIGHTS QUALITY - The perfect upgrade for your Harley Davidson. Be seen from 3X farther away. Extremely bright running and brake lights. High quality ABS housing, poly-carbonate lens and 35 high intensity LEDs per unit. Stay safer, be seen from farther, light up the night..
  • EAGLE LIGHTS WARRANTY - The best warranty in the industry! The lights should outlas....
Check Stock

Eagle Lights Flashing Strobe LED Tail Brake Light Kit for Harley Davidson Tri Glide Models

  • FLASHING STROBE BRAKE LIGHTS - The 8900TL5 tail lights have a built-in flashing brake light to take your safety to the next level. The lights connect directly to your Harley Davidson motorcycle and require no programming or wiring for the flashing brake light function. Once the brake is activated, the lights will flash rapidly 3 times and then turn a bright red..
  • READY TO ROCK - The LED tail lights are ready to be installed right out of the box. The harness from the lights plug directly into your Harley Davidson motorcycle's harness. They feature and include running lights and flashing brake lights. No load resistors are required for installing the brake lights. The 8900TL5 is compatible with the Harley Davidson on board computer..
  • The perfect upgrade for your Harley Davidson. Be seen from 3X farther away. Extremely bright running and brake lights. High quality ABS housing, poly-carbonate lens and 35 high intensity LEDs per unit. Stay safer, be seen from farther, light up the night..
  • EAGLE LIGHTS WARRANTY - The best warranty in the industry! The lights should outlast your bike! But should something go wrong, you are covered by a full lifetime warranty. No hassle returns and no hassle warranty replacement..
  • DIRECT REPLACEMENT - Designed to directly replac....
Check Stock

4PCS Upgraded Brake Light Flasher Controller, 12V-85V Flash Strobe Controller Flasher Module for Most Brake Lights Including LED Clusters Cars Motorcycles Electric Bicycles and Other LED Lights

  • ...atest version brake light flasher is fit for DC 12-85V. Has a wider using range design than most 12-24V brake light flashers on market. Suitable for all most motor vehicles, cars motorcycle vehicles electric bicycles, and other LED lights. That's why you are suggested to choose us..
  • INCREASE SAFETY: Add the flashing strobe module box, to get the strobe feature on the 3rd brake light! A quick and cost-efficient way to make your intention to slow or stop more noticeable to those behind you..
  • THIRD BRAKE LIGHT STROBE FEATURE: Flashing Module designed for 3rd brake LED light. When you press on the brake pedal, the light will do a quick strobe 4 times, then 4 times slow blinks, then stay on steady. Improve traffic safety warnings, to reduce rear-end accidents..
  • EASY TO INSTALL: On the module, has 4 wires, cut the wires going to your third Brake light. Hook the 2 wires going to your third brake light, to the input of the module. Then take the output wires of the module to the light itself. You're done! (Note: Do not install the negative wire in series!).
  • 4 IN 1: You will get 4 pack compact block controller unit, easy to mount with the supplies 2-sided tape, value for the units. And got our friendly service! Feel free to write to us via Amazon, all questions wi....
Check Stock

Alla Lighting 3800lm BAY15D 1157 Red LED Strobe Brake Lights Bulbs Xtreme Super Bright 7528 2357 1157 LED Bulb High Power 3030 36-SMD 12V LEDs for Car Truck Motorcycle Flashing Brake Stop Tail Lights

  • (Set of 2) 1900 lumens per BAY15D 1157 LED strobe brake lights bulb, total 3800 lumens for both 1157 LED bulbs.
  • Each 1157 strobe flashing brake led bulb is equipped with high illumination and high power 36 pieces 3030 LED chips..
  • Built-in Intelligent IC driver and 6063 aviation aluminum material for best cooling and longer lifespan..
  • Application: Used for upgrading brake stop light,tail lights, center high-mounted stop lights (3rd brake light),etc..
  • Fits BAY15D wedge base,Cross reference number: 1157, 7528, 2057, 2357, 3496, 1034, 198, 1076, 94, 1154, etc. Extra load resistors maybe required to avoid the errorr code or hyper-flash..
  • One year warranty. Please check the owner manual or the stock lamp to confirm the cross reference number before purchasing. Amazon fitment is only for reference, not 100% guaranteed accuracy..
Check Stock

Alla Lighting BAY15D 2057 1157 LED Strobe Brake Lights Bulbs, Pure Red 7528 1154 3496 Flashing Stop Lamps Dual Filament 12V for Cars, Trucks, Motorcycles, Trailers

  • (Set of 2 BAY15D base 7528/1157 Flashing LED bulbs) Double contact BAY15D 1157 Flashing LED brake light bulbs will strobe at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs rear-end collision..
  • LED Chips: 39 pieces high quality,high power with high performance 2835 led chips per 7528/1157 LED strobe brake lights bulbs---360 degree full angle illumination with projector lens design.
  • Dual filament BAY15D base S8 shape LED strobe bulbs. Used for replacing rear brake stop light, center high mount stop ( 3rd brake ) light, rear turn signal light, etc.Extra load resistors maybe required to avoid the error code or blinking issue..
  • The length is about 1.9 inch. Cross reference number: 1016, 1034, 1157, 1606, 1662, 2057, 2357, 2397, 3496, 7528, 1034, 1035, 198, 7528L, 94, 1076, BAY15D, 1157LL, 2357LL, 2057LL, 198LL, P21/5W, 7537, and 1154,etc.
  • One Year Warranty, Color: Brilliant pure red. Voltage: 12V - 24V,built in stable current IC driver for longer lifespan..
Check Stock

Alla Lighting 2800lm 3156 3157 LED Strobe Brake Lights Bulbs, Pure Red Xtreme Super Bright T25 Wedge 5730 33-SMD 12V Flashing Stop Lamps 3057 3457 4157 4057 3056 3057K 4057KX 3157LL

  • (Set of 2) Upgraded version, built-in USA-made smart IC driver for the best light performance and longer lifespan. T25 wedge 3156 3157 LED strobe flashing brake lights bulbs will strobe at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, motorcycles, SUVs, RVs rear-end collision..
  • High illumination light output: 1400 lumens per T25 3156 3157 LED strobe flashing lights Bulb, total 2800 lumens for both 3156 3157 LED bulbs.
  • Each 3133 3157 red LED bulb is equipped with high illumination and high power 33 pieces 5730 LED chips..
  • Application: Used for upgrading turn signal blinker light, brake stop lights, tail light, taillights, etc..
  • Fits T25 wedge base, Cross reference number: 3056, 3156, 3047, 3047LL, 3047K, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157,3157K,3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 3157-CK, 3157-SRCK, 3157-SCK, P27W/7W, 3157/40610, 3157/17172, GM 12450004, 78633, 17945, HIB3157, etc. Extra load resistors maybe required to avoid the error c....
Check Stock

Custom Dynamics® Magic Strobes™ Plug-N-Play Brake Light Flasher with 10 Strobe Patterns - Fits 2014-2021 Harley FLHT, FLHR, FLHX, FLTR Touring Models (RSG)

  • Applies brake flash/strobe patterns to Custom Dynamics Rear 1157 LED bullet style run, brake, turn signals & LED Squareback or Laydown rear center taillight (does not flash Tour-Pak).
  • Unit also allows Fillerz to flash/strobe when functioning as Run/Brake/Turn..
  • Over-current/thermal/short circuit/reverse wiring protection..
  • 5 Year Warranty | 84W, 12V system. | WORKS WITH LED's ONLY.
  • Plug and play installation for 2014-2021 Harley-Davidson FLHT, FLHR, FLHX, FLTR Touring Models with LED Brake Lights (See Fitment Below.).
Check Stock

Alla Lighting 2600lm T15 921 912 LED strobe Flashing Lights Bulb, Red Center High-Mounted Stop Lamp(3rd Brake Lights) W16W 922 921LL 912LL, Xtreme Super Bright 4014 48-SMD

  • (Set of 2) T15 912 921 strobe LED bulbs will strobe 3-4 times on & off at the beginning reversing or braking mode for much easier notified and safer stop, and then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision. LED Type: 48 pieces high power & high illumination 4014 SMD led chips per 912 921 strobe flashing LED backup reverse brake light bulb. Working Power: 5.5W.
  • Light Output: about 1300 lumens per T15 912 921 led backup light bulb, 2600 lumens for both 912 921 LED reverse lights bulbs. Size: 0.55" in width, and 1.66" in length.360° full view angle. No UV or IR radiation..
  • Easy to use.Built-in intelligent IC driver for better performance.Energy-Saving, Low temperature, Long Lasting..
  • Use for upgrading the stock T15 T10 wedge bulbs, directly fit 906 902 904 912KX 912K 921K 921KX 921LL W16W 912 921 back up reversing light. 3rd-brake light (stop light) ,cargo trunk lights, turn signal light, tail light bulbs lamp..
  • 12 Months Warranty. Best US customer service and solve the issues at the first time of working hours. Color: 6000K Xenon White..
Check Stock

Custom Dynamics Magic Strobes Plug-N-Play LED Brake/Tail Light Flasher with 10 Strobe Patterns - Fits 2014-2023 Harley Electra Glide, Street Glide, Road Glide, Road King Touring Models MAGICSTROBESRSG

  • Applies brake flash/strobe patterns to Custom Dynamics Rear 1157 LED bullet style run, brake, turn signals & LED Squareback or Laydown rear center taillight (does not flash Tour-Pak).
  • Unit also allows Fillerz to flash/strobe when functioning as Run/Brake/Turn..
  • Over-current/thermal/short circuit/reverse wiring protection..
  • 5 Year Warranty | 84W, 12V system. | WORKS WITH LED's ONLY.
  • Plug and play installation for 2014-2023 Harley-Davidson Electra Glide, Street Glide, Road Glide, Road King Touring Models with LED Brake Lights (See Fitment Below.).
Check Stock

Blaster-X Integrated LED Tail Light for 2014-2023 Honda Grom (Smoked Lens)

  • Complete Plug and Play Integrated LED tail light with high quality smoked lens - OEM fit. Features our Microprocessor based Blaster-X Technology with Brake Alert and Strobe Mode built in! New 2nd Generation Programming Interface allows users to easily customize features! New Sure-Blink Technology Plug and play connectivity with OEM connectors! ***REQUIRED ACCESSORY: ELFR-1_QD Flasher Relay***. Recommended Accessory: Blaster-X Control Switch. Made in the USA! 2-year Warranty & Satisfaction.
  • Brake Alert automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation..
  • Turn Alert is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast t....
Check Stock

Xprite 30' LED Chase Strobe Light Bar, Offroad Safety Flashing Lightbar w/ Running, Brake, Reverse and Turn Signal Lights for UTV, ATV, RZR, Polaris, Can-am, Yamaha, Side by Sides, 4x4, Trucks - RBYBR

  • ➤FEATURES - Xprite LED Strobe Chase Bar for Off-Road UTV ATV SXS has a Total of 5 Blocks and 6 High Power LEDs Per Block. Flood Lens Increase Visibility & Safety. You are Sure to be Seen in Fog, Rain, Snow, or any other weather condition. Can Endure Harsh Road Conditions and Extreme Weather..
  • ➤FUNCTIONS & MODES - These have Three Functions: Block #1 & #5 Running /Stop/Turn Signal Lights.
  • and Block #3 Lighting or Reverse Light. The strobe lights have 7 different patterns..
  • ➤HIGH QUALITY - The Lens are Made of High Quality PC Plastic that is scratch resistant and shatterproof. Black Housing and Brackets are Shockproof and Corrosion-Resistant, Over 50,000 Hours Lifespan, Tough Enough to Stand Up Whatever The Road Throws at You!.
  • ➤SWITCH - Convenient Power Switch to Turn On and Off, Second Switch to Change Between 7 Different Strobe Patterns. Independently Control Brake Light, Reverse Light, and Strobe Patterns, Turn Strobe Off by Holding the Strobe Pattern Switch for 3 Seconds..
  • ➤EASY INSTALLATION - Come with Over 15FT Cable Length and mounting brackets. Both ends of the bracket can angle the position up and down with Screw holes. For 4 door model may require extension: UTV-RSL-G2-EXT-10FT, ASIN: B079C4YR7G sold separa....
Check Stock

LivTee Extremely Bright Flashing Strobe Blinking Brake Stop Tail LED Lights Panel with 1157 Base Compatible with Harley Dyna Street Glide Road King, Brilliant Red

  • (Set of 2 Lights)93SMD 3014 high brightness chips per bulb,Working Voltage:9v-30v..
  • Compatible for Harley Dyna, Street Glide, Fat Boy, Softail, Road King, Springer and other models with 2 inches standard new bullet style front tail brake lights and 1157 double contacts bulbs. Easy installation, plug and play..
  • Application: Flashing Strobe Blinking brake LED lights will fast flashes 3 times at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision..
  • Advantage: More than 300% brighter than original halogen bulb, built in Constant Current IC for Longer life span & Low Power Consumption. Beautiful, bright light. Great for tail brake lights..
  • Please check the fitment note application before purchasing. We offer one year warranty for manufacturer quality. Any issues or questions please feel free to contact us, we are always here to satisfy all of you..
Check Stock

FANTELI 912 921 LED Bulb, Strobe Flashing 3rd Third Brake Center High Mount Stop Light, 300% Brighter Non-Polarity T15 906 904 902 W16W Brilliant Red

  • STROBE FLASHING DESIGN - The T15 W16W 906 904 912 921 LED bulb will strobe 3 times (legal blinking times) before turning stable to offer you a more noticeable and safer stop..
  • HIGH POWER & 300% BRIGHTER - Each T15 W16W 906 904 912 921 LED bulb has 21pcs 2835-SMD LEDs which make it 3 times brighter than traditional halogen bulbs. 360° full-angle light will make your car more noticeable while braking..
  • NON-POL ARITY & EASY INSTALLATION - There is no need to worry about polarity direction nor fuse blowout, just simply plug and play and the installation will be finished within just 10 minutes..
  • ADVANTAGES Vs HALOGEN BULBS - The built-in intelligent IC driver of these brake lights can bring you a more energy-saving (from 16w to 4.5w), lower temperature (from 1000°F to 150°F), and longer life span (from 1000h to 30000h) performance without any UV/IR radiation..
  • PACKAGE INCLUDED - (Pack of 2) T15 W16W 906 904 912 921 LED bulb third brake lights Strobe Flashing replacements, 4.5W per bulb, 1100lm per bulb, 9-30V Wide voltage, 375Ma current, bulb size: 1.57in(L)*0.59in(W)+0.39in(H) net weight: 6g/pcs.
Check Stock