Categories

Best Stroke Box Machine

Bishop Rotary Microangelo Rotary Tattoo Machine Cams and Bearings Kit

  • TATTOO MACHINE CAM BEARING – The Bishop Rotary Tattoo Machine Cam Kit is designed for the Bishop Rotary Microangelo Tattoo Machine. It allows you to easily adjust the stroke of your machine..
  • MAGNETIC EASY SNAP-ON – The cams for tattoo machines are magnetic and allow for an easy snap-on installation. The kit comes with one 3.5mm tattoo cam and one 4.2mm tattoo cam..
  • 3.5MM STROKE CAM– The 3.5 stroke tattoo cam is the standard stroke that comes with every Microangelo tattoo machine. It’s ideal for black and grey shading and for color packing and clean linework..
  • 4.2MM STROKE CAM – The 4.2 extra-long stroke tattoo cam is designed for solid color packing and tribal black tattooing. It’s also more effective at bold linework than the 3.5mm cam..
  • KIT INCLUDES – Microangelo Rotary Tattoo Machine Cams Bearings Kit includes 2 tattoo machine cams with bearings, 2 drive bars, 2 Allen keys, 2 O-rings, and 3 Snug-fit rubber nipples..
Check Stock

PROGRESSIVE AUTOMATIONS 12V Industrial Linear Electric Actuator. 6 in. 330 lbs. Stainless Steel Rod, High Force, Brushed DC Motor, Durable Stroke for Marine, Automation, Robotics PA-09-6-330

  • 【Specification】: Stroke: 1.2inch-6.5inch (Adjustable).
  • Rated Voltage: DC24V. Under the same 24V voltage, the closer to the axis, the greater the pushing force. The maximum pushing force is 7.5kg. The pushing force will be reduced by about half every 1 centimeter of movement outside the axis..
  • 【Aluminum Alloy Material】: The surface has been polished 27 times, the aluminum body efficiently dissipated the DC motor heat, it can make the motor stays cool to the touch even under load..
  • 【TORQUE】: When the Rocker Arm is Closest to the Axis AND voltage is 24V, the maximum pushing force can reach 15 lbs. However, with the decrease of voltage and the Rocker Arm is Far Away from Axis, the Torque will be smaller.The minimum torque is 3.2 lbs..
  • 【Stroke Adjustable】: The stroke can be adjusted by changing the position of the screw on the slide rail. The stroke of this product can be adjusted according to the needs of users..
  • 【Metal Gear Reduction Box】: All metal gear, you could use gear grease in the gear reduction box. In this way, the friction will be reduced and the machine will work more smoothly..
Check Stock

Ambition Vibe Tattoo Machine - Rotary Cartridge Battery Pen with 2400mAh Touch Buttons LED Digital Display Wireless Power Brushless Motor Tattoo Equipment Supply for Professional Artists and Beginners

  • Machine Size: The ambition vibe machine is the same size as the soldier machine, 145mm in length and 32mm in diameter. We upgraded the material and made it with high hardness aluminum alloy material, which reduced the weight of this vibe tattoo pen to 185g. At the same time, the weight balance is further improved, making it easier for tattoo artists to tattoo for a long time. Note: When the first time use, fully drain the battery and use it with a full charge..
  • Upgrade Touch Button&Big Battery Capacity: The battery of the vibe tattoo machine adopts high-sensitivity touch buttons more convenient to operate. The screen displays the machine's working voltage, current, remaining power, Hertz and timer. Battery capacity is 2400 mAh, can work for more than 7 hours at an output voltage of 8V, and the two batteries can be used for more than 14 hours in total, equipped with a jumpstart start function, even big mags can be pushed..
  • Machine Motor: The vibe wireless tattoo machine built-in a brushless motor and 4.0mm stainless steel stroke cam. The brushless motor greatly prolongs the service life of the machine, and is more powerful and quieter than the coreless motor. The 4.0 stainless steel stroke cam is not easy to wear and deform, it makes the machine have go....
Check Stock

Ambition Vibe Tattoo Machine - Rotary Cartridge Battery Pen with 2400mAh Touch Buttons LED Digital Display Wireless Power Brushless Motor Tattoo Equipment Supply for Professional Artists and Beginners

  • Machine Size: The ambition vibe machine is the same size as the soldier machine, 145mm in length and 32mm in diameter. We upgraded the material and made it with high hardness aluminum alloy material, which reduced the weight of this vibe tattoo pen to 185g. At the same time, the weight balance is further improved, making it easier for tattoo artists to tattoo for a long time. Note: When the first time use, fully drain the battery and use it with a full charge..
  • Upgrade Touch Button&Big Battery Capacity: The battery of the vibe tattoo machine adopts high-sensitivity touch buttons more convenient to operate. The screen displays the machine's working voltage, current, remaining power, Hertz and timer. Battery capacity is 2400 mAh, can work for more than 7 hours at an output voltage of 8V, and the two batteries can be used for more than 14 hours in total, equipped with a jumpstart start function, even big mags can be pushed..
  • Machine Motor: The vibe wireless tattoo machine built-in a brushless motor and 4.0mm stainless steel stroke cam. The brushless motor greatly prolongs the service life of the machine, and is more powerful and quieter than the coreless motor....
Check Stock

Peak Solice Pro Cordless Tattoo Machine Pen, Professional Lightweight Equipment for Tattooing, Fully Adjustable Stroke, Up To 10 Hours of Power, Pro Tattoo Supplies for Artists, Black

  • CORDLESS TATTOO PEN MACHINE – Tattoo any style without limits using the Solice Pro pen tattoo machine. A cordless tattoo machine, offers a fully adjustable stroke length for all tattooing styles..
  • FULLY ADJUSTABLE STROKE – Adjust your stroke on the fly with this professional tattoo machine pen. A simple turn of the stroke adjustment knob, change your stroke from 2.4mm up to 4.2mm..
  • 10 HOURS OF POWER – The Solice Pro tattooing machine offers up to 10 hours of tattooing power with the included PowerPack battery pack. This pen tattoo machine battery is detachable, easily switch to a wired setup..
  • LIGHTWEIGHT DESIGN – In a lightweight tattoo machine design weighing only 7.2oz (with the PowerPack battery) makes this tattoo equipment comfortable to hold and easy to handle..
  • PRO TATTOO SUPPLIES – 1 PowerPack battery, 1 RCA Module, 2 Battery Pack Converters (3.5mm + RCA inputs), 3 O-rings, 2 Allen keys, 1 spare flywheel, 1 USB-C charging cable, 1 RCA cord..
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

BJTDLLX 2 Stroke 12 HP Outboard Motor 169CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System

  • 【2-stroke 12HP Outboard Engine】Displacement: 169CC.
  • Control System: Tiller control Starting System: Manual start..
  • 【Details】Control System: #93 gasoline.
  • Recommended Propeller range: 3 -9"1/4''x8".
  • Recommended Lubricant: 2 Stroke Lubricating oil.
  • 【Advantages】water cooling technology improves the reliability of the whole machine.
  • light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
  • 【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
  • after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
  • 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • ...n install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable for road cutting machine, grinder, water pump, microtiller, air conditioner compressor, microtiller, etc. Packing list:Screw driver + 14-17mm wrench + connecting plate set screw + fixed key + screw gasket + and a 10-12mm wrench+Diesel engine..
Check Stock

Diesel Engine 247CC 4 Stroke 5HP Single Cylinder Air Cooling Vertical Engine Motor Hand Start Direct Injection 3.6KW (Black, 173FA)

  • 【HIGH PERFORMANCE DIESEL ENGINE】247CC 4 Stroke Diesel Engine, equipped with self-injection diesel system, good atomization, low diesel consumption, more punctual diesel injection, and long service life. Widely Applicable for road cutting machine, grinding machine, water pump, micro tiller, air conditioning compressor, micro tiller, etc..
  • 【RELIABLE COOLING DESIGN】Strengthen thickening aluminum alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【EASILY SPEED CONTROL】Comes with a speed control handle, it can be positioned at any speed, equipped with throttle cable mounting seat, and can install throttle cable according to needs. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening, large diesel tank volume, special painting process, seam welding, and oil leakage. Optimize the diesel system and intake and exhaust systems to save energy and diesel..
  • 【MAIN PARAMETERS】Displacement: 247CC, Rated power: 3.6KW, Engine speed: 3600 RPM, Cooling mode: Air coo....
Check Stock

WHY-YUE Tattoo Kit Tattoo Rotary Guns Adjustable Stroke Direct Drive Motor Tattoo Machine Motor Supplies (Color : Grey)

  • The rotary machine has a ultralight Metal performance,high quality Japan imported motor,used for both lining and shading..
  • this machine features a powerful motor that guarantees reliable, quiet operation without any vibration..
  • The machine uses adjustable stroke design (1-5mm adjustment), the machine can be adjusted according tattoo-style..
  • Lining, for faster speed, appropriate to shorten the needle stroke.
  • Shading, in order to penetrate deeper and strength, appropriate to increase the needle stroke..
Check Stock

Peak Proteus Adjustable Pen Tattoo Machine, Professional Lightweight Equipment for Tattooing, 7 Stroke Options, Black and Glossy Red

  • PEN-STYLE TATTOO MACHINE – Tattoo in any style with ease with the Peak Proteus rotary pen tattoo machine. An adjustable rotary tattoo machine with perfect pen-like control..
  • FORWARD-WEIGHTED DESIGN – With an ergonomic and forward-weighted design, this professional tattoo machine is designed to reduce hand fatigue during long tattoo sessions..
  • OFFERS 7 STROKE OPTIONS – The Peak Proteus tattoo equipment offers 7 stroke options (2.4mm, 2.7mm, 3.0mm, 3.3mm, 3.6mm, 3.9mm, 4.2mm) with a simple turn of the stroke adjustment knob..
  • SUPER-LIGHTWEIGHT DESIGN – In a super lightweight tattoo machine design of only 174g makes this rotary machine comfortable to hold and easy to handle..
  • TATTOO IN ANY STYLE WITH EASE – This tattooing machine comes with 2 O-rings, 1 spring, 1 allen key, 1 drive bar, and 1 wheel cam. Features an RCA Jack Connection and 10v maximum voltage..
Check Stock

Ambition MARS-U Wireless Tattoo Machine with Adjustable Stroke - Rotary Cartridge Tattoo Machine Pen with 1800mAh Power Coreless Motor Digital LED Display for Professional Tattoo Artist

  • Material: Ambition rotary battery tattoo pen machine made of aluminium alloy frame and CNC carved. Length:137mm/5.39inches, diameter: 32mm/1.25inches, weight:217g/7.65oz. Detachable as a whole, easy to disassemble, maintain and replace spare parts..
  • 6 Adjustable Strokes: This tattoo machine support 2.0mm, 2.4mm, 2.8mm,3.2mm,3.6mm and 4.0mm stroke length, change the stroke on the fly just by turning the adjustment knob, great for applying soft black and grey,packing colour and blending and lining. The pen machine is compatible with most cartridge needles types..
  • About Motor: Ambition rotary battery tattoo pen machine built-in coreless motor, 12V - 10500RPM. More powerful, low skin loss, fast coloring, no hot for long time working. Eccentric wheel system make tattoo machine get stronger and better for liner and shader.Built-in stainless steel high-grade positioning steel ball to adjust the needle position with , adjust the gear position accurately..
  • About Battery: Battery Capacity is 1800mAh, can support long-term tattoo work, output stable. 8V output voltage can work for 6 hours, only need 1.5-2 hours to fully charge. The si....
Check Stock