Categories

Best Structural Bolt Kit

Hooke Road F150 Offroad Steel Front Bumper w/Winch Plate Compatible with Ford F-150 2004 2005 2006 2007 2008 Pickup Truck

  • 3-piece design full-width front bumper for Ford F150 2004 2005 2006 2007 2008. Not Compatible with Factory Sensors. Easy bolt-on installation. No drilling required..
  • Rugged off-road look. Fully-welded D-Ring mounts with 4.75-ton capacity. Built-in winch plate rated up to 12000 lbs..
  • Bumper weight about 145 lbs. Heavy-duty 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) for the structural connection plates and winch plate..
  • Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 2 packages. Included Front bumper assembly.
Check Stock

Zoeller 284-0004 Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

  • Pumps up to 4800 gallons per hour,, pumps water up to 25 vertical feet.
  • 1/2 HP Cast Iron Sewage Pump with Vertical Float Switch.
  • 19 in. x 30 in. 30 gallon structural foam basin, 4 In. rubber inlet hub fits DWV schedule 40/80 pip, 2 In. discharge and vent, built-in torque stops.
  • Premium structural foam cover with 8 bolt configuration, air tight molded reusable PVC seal.
  • Check valve features, heavy duty rubber boots, stainless steel clamps, full flow design, 2 in. connections.
Check Stock

OMT 2-in-1 Brake Tool Kit Drum Brake Tool Kit and Brake Caliper Compression Tool Drum Brake Tool for Drum Brake Repair and Adjustment Brake Caliper Wind Back Tool for Brake Pad Replacement Reset

  • EASY OPERATION: Both the drum brake tool and disc brake caliper tool set offer reinforced ergonomic handles to save you time and spare you effort and aggravation during use. Everything is clearly labeled in the custom blow-molded carrying cases and included instructions..
  • PREMIUM MATERIAL: Each part is made of structural-grade steel for good ductility combined with outstanding strength, durability, and longevity. Black oxide and chrome coatings ensure superior long-lasting wear and corrosion resistance..
  • SATISFACTION GUARANTEED: Orion Motor Tech backs these brake drum tool kit and brake caliper wind back tool with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come!.
Check Stock

vikofan 8 Pcs Workbench Bracket Kit Sturdy Steel Angle Brackets Multi-Angle Joint Fastener Shelf Fit for Desk Edge & Box & Wood Beam with Screws

  • The workbench bracket can help you work out of building your own work bench..
  • Material: The workbench bracket kit made of heavy duty 3/16 inch thick structural steel.Coated with green powder.(Point of improvement）.
  • Design:The workbench brackets ensure that the legs and top will be parallel, plumb and square..
  • Package Included:8 Pcs Workbench Bracket（8 brackets to build a bench any length, width or height you want while assuring the bench will be square and plumb.）,Screws and Instruction..
  • Easy to install:Add lumber or steel legs, and a wood or metal work surface, then bolt or weld it together.(Specific reference installation instructions).
Check Stock

GCi STRONGER BY DESIGN G-16 Pinch Clamps for Inside Mount Tonneau Covers (6 Pack). Made with Structural Aluminum. Roll Up, Hard, Soft Covers and Tops on Pickup Trucks

  • Measure dimensions needed for your Tonneau Cover before buying. Clamp dimensions: A = 1/2" to 3/4" Jaw Opening, B = 1 1/2". Shoulder bolt prevents cutting into aluminum..
  • 6 high quality structural aluminum pinch clamps for securing inside mount tonneau covers.
  • Made in the USA with Structural Aluminum to Ensure Quality and Strength..
Check Stock

NEW 55-57 CHEVY FACTORY REPLACEMENT CLUTCH PEDAL CROSS SHAFT BOLT AND BUSHING KIT PUSH ROD TRI-5 1955 1956 1957 150 210 BEL AIR NOMAD SEDAN DELIVERY DEL RAY

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Cross Shaft Bolt and Bushing Kit that fits 1955-1957 Tri-Five Chevy's with Manual....
  • This Southwest Speed clutch pedal cross shaft bolt and bushing kit are a reproduction of the original clutch pedal push rod bolt and bushing used on....
  • This kit includes a steel shoulder bolt, two delrin bushings, 3 flat washers, and an nylon locking nut > The shoulder bolt and bushings will look,....
  • Features: > Steel shoulder bolt with black oxide finish > Factory reproduction > Corrosion-resistant lock nut with nylon insert > Required for....
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock

Big-Sert 5382 3/8-24 Oversized Inch Thread Repair Kit

  • 3/8-16 Starter bolt thread repair kit cast iron blocks or aluminum blocks P/n 1535 TIME-SERT.
  • TIME-SERT P/n 1535 Kit includes all the tools and 4 special inserts with straight section for bolt alignment built into the insert..
  • The stripped Starter bolt thread depth of the hole should be 1.200" inches or 30mm Depth minimum..
  • Note: This kit can also repair a failed coil style insert. The failed hole should not be larger than the drill included in kit which is .484 inches..
Check Stock

GCi STRONGER BY DESIGN G-16 Pinch Clamps for Inside Mount Tonneau Covers (4 Pack). Made with Structural Aluminum. Roll Up, Hard, Soft Covers and Tops on Pickup Trucks

  • Measure dimensions needed for your Tonneau Cover before buying. Clamp dimensions: A = 1/2" to 3/4" Jaw Opening, B = 1 1/2". Shoulder bolt prevents cutting into aluminum..
  • 4 high quality GCI structural aluminum pinch clamps for securing inside mount tonneau covers.
  • Made in the USA with Structural Aluminum to Ensure Quality and Strength..
Check Stock

TIME-SERT 3/8-16 Starter Bolt Thread Repair kit P/n 1535

  • 3/8-16 Starter bolt thread repair kit cast iron blocks or aluminum blocks P/n 1535 TIME-SERT.
  • TIME-SERT P/n 1535 Kit includes all the tools and 4 special inserts with straight section for bolt alignment built into the insert..
  • The stripped Starter bolt thread depth of the hole should be 1.200" inches or 30mm Depth minimum..
  • Note: This kit can also repair a failed coil style insert. The failed hole should not be larger than the drill included in kit which is .484 inches..
Check Stock

Kuryakyn 7657 Motorcycle Accessory: Receiver Hitch with 1-7/8\ Diameter Trailer Hitch Ball for 2014-19 Harley-Davidson Touring Motorcycles, Black/Chrome

  • Ensure smooth sailing and eliminate any fear of the "trailer shimmy" with our sturdy forged and welded steel receiver hitch.
  • Unique dual receiver design means the ball mount assembly engages the hitch frame vertically on both sides for optimum structural support.
  • This Black and Chrome Receiver Hitch for Touring Models remains hidden when ball mount is not installed and is the most simplistic bolt-on installation using simple hand tools.
  • Includes (1) Left Side Strut Hardware Kit - CONTINUED: (1) Right Side Strut, (3) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
  • suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torq....
Check Stock

#8-32 X 7/8'' Stainless Phillips Oval Head Machine Screw, (100 pc), 18-8 (304) Stainless Steel, by Bolt Dropper

  • OUR PROFESSIONAL HEX LEG BOLT are often located in a position that makes bolt kit susceptible to corrosion and therefore is an obvious choice both in terms of weight saving, appearance, and performance..
  • FANTASTIC CORROSION RESISTANCE. Fasteners kit is used widely in the home and office appliance, communication equipment and other machinery industry..
  • WE OFFER A GREAT METRIC HARDWARE ASSORTMENT: Hex Bolts, Machine Screws, wood screws, Carriage Bolts, Lag Bolts, Wood Screws, Sheet Metal Screws. Just select a couple and Add to Cart!.
  • CHOOSE FASTENERS KIT SET FOR GENERAL PURPOSE USE. These bolt assortment intended for both manual and automatic screwing, twisting and tightening with the maximum force developed by any bolt tool..
  • STAINLESS STEEL BOLT SET ARE RELIABLE AND DURABLE and are used in many applications. It is widely used both for private repairs and for fixing parts of large production facilities..
Check Stock

502pc Motherboard Standoffs Screw Kit | Basic Computer Screws Set for HDD Hard Drive, Case, Fan, Power Card, Graphics, Chassis, CD-ROM, ATX Case | for DIY & Repair

  • {Metric & Imperial Sized Standoffs} Bolt Dropper’s kit has both metric and imperial standoffs offering a 99% fit in all types of mother board installations. Other kits don’t include an imperial size standoff which is necessary in many installations. No need to buy multiple kits to try and find the right size fastener with Bolt Dropper’s..
  • {502 Piece Kit} The Bolt Dropper PC Screw Kit contains more of the most used screws, nuts, washers, and chassis hand twist screws than others. This way you don’t run out during your build or repair. Other kits contain only a few chassis screws for your case, but Bolt Dropper contains more than double of the next leading brand. The 530-piece kit not only contains more quantity of each but also contains a larger variety & color of fasteners to help you find the right fastener for the right job..
  • {High Quality Screws} High quality screws with deep cut drives prevent stripping and snapping as well as ensuring a secure fit. When you’re constantly upgrading and removing parts, a screw that doesn’t strip is essential. Bolt Dropper’s precision-made fasteners add a layer of confidence knowing you can add and remove them time and time again without worry of ever stripping a head or snapping a screw..
Check Stock

Hard Case Compatible with Halo Bolt Air 58830 Mwh/for ACDC Max 55500 mWh/for Air+ Portable Emergency Power Kit, Car Jump Starter Holder Bag for AC Inverter, Air Nozzles and Accessories-Bag Only

  • Wide Compatibility Car Jump Starter Case: Battery pack charger organizer holder is fit for Halo Bolt Air 58830 Mwh/ for ACDC Max 55500 mWh/ for Air+ Portable Emergency Power Kit. For halo bolt air case external size: 10*8.4*2.6inches, internal size: 9.6*8*1.6inches. Note: For sale is car charger power bank holder, for halo bolt air 58830 Mwh and accessories are not included..
  • Case for Halo Bolt Air Car Charger Thoughtful Design: Portable battery charger bag has a detachable divider inside, allowing you to store the charging cable, adapter and for Halo Bolt ACDC max 55500 mWh emergency power kit separately and avoid friction and collision. With zipper mesh pocket, for halo battery charger jump starter organizer can hold tire pump, 4 interchangeable air nozzles and extra accessory kit, preventing loss and forgetfulness..
  • High-Quality Material for Power Bank Emergency Starter Box: Made of durable EVA material, for halo bolt air carrying case is shock-proof, drop-proof and easy to clean. Car emergency kit organizer protects for halo car air pump charger from scratches and dust, absorbs external impact effectively if dropped. Power banks storage case ensures for halo bolt air car jump starter & air compressor safety, and makes it easy to use..
Check Stock