Categories

Best Structural Bond

Denso (5341) ITV24 Iridium Power Spark Plug, (Pack of 1)

  • 0.4 mm iridium center electrode: world's smallest diameter that maximizes firing potential.
  • U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching.
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode.
Check Stock

Denso (5340) ITV22 Iridium Power Spark Plug, (Pack of 1)

  • 0.4 mm iridium center electrode: world's smallest diameter that maximizes firing potential.
  • U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching.
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode.
Check Stock

Denso (4702) IK20TT Iridium TT Spark Plug, (Pack of 1)

  • Larger spark translates to more power and superior fuel economy.
  • 0.4 mm iridium center electrode, world’s smallest diameter that maximizes firing potential.
  • 0.7 mm needle tip ground electrode, promotes higher spark energy and less heat quenching.
  • DENSO patented 360 degree laser welding process, ensuring exceptional quality bond and structural strength with the iridium center electrode..
Check Stock

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

West Systems G Flex Epoxy Adhesive Tube 655k

  • EXCELLENT ADHESION to hard-to bond woods. This toughened, versatile liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass. Can also be used to wet out and bond fiberglass tapes and fabrics..
  • MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration. G/flex can be used on damp or wet surfaces, and even underwater when applied with specific techniques. Perfect for r....
Check Stock

3M Panel Bonding Adhesive, 38315, 50 mL Cartridge

  • Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
  • A high performance two component epoxy adhesive..
  • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components..
  • Also use to reinforce welded or riveted structural components..
  • Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle. The Net Fill amount is 47.5mL. Cartridge Volume is 50mL.
Check Stock

LORD LO3020503-1 Gray 406/19 GB 4:1 Acrylic Adhesive Cartridge, 12.68 fl oz

  • Bond oily metal alloys with little preparation.
Check Stock

Makita 10 Pack - 4 Inch Cut Off Wheels For 4' Grinders - Aggressive Cutting For Metal & Stainless Steel

  • ...ut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material.
Check Stock

West System 650-8 G/Flex Toughened, Versatile, Liquid Epoxy Resin and Epoxy Hardener, Permanent Waterproof Bonding Of Fiberglass, Ceramics, Metals, Plastics, Damp & Woods, 4.5 Ounce x 2 Bottles

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

3M Scotch-Weld Low Odor Acrylic Adhesive DP8805NS, Green, 45 mL Duo-Pak

  • Low odor and non-flammable properties for a safer working environment compared to typical acrylic adhesives.
  • 4 minute work life with 9 minutes to structural strength.
  • Durable finished bond with good shear and high impact strength.
  • Bonds difficult surfaces such as most powder coats and plastics.
  • 18-month room temperature shelf life simplifies inventory management.
  • Features spacer beads to control bond line thickness.
  • Durable finished bond with excellent sheer and high impact strength.
  • Low odor and non-flammable properties for a safer working environment compared to typical acrylic adhesives.
  • Bonds difficult surfaces such as powder coats and oily surfaces.
  • Fast adhesion and drying time reduces waiting and maximizes work efficiency.
  • Features glass shimming beads to control bond line thickness to prevent excessive squeeze out.
Check Stock

3M Scotch-Weld Acrylic Adhesive DP8410NS, Green, 490 mL Duo-Pak

  • 11 minute work life with 36 minutes to structural strength.
  • Durable bond with excellent shear, peel and high impact strength.
  • Bonds to a variety of surfaces, including most metals and plastics.
  • Features spacer beads to control bond line thickness.
Check Stock

Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ...ut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material.
Check Stock