Categories

Best Structural Plate

Bobco Metals Hot Rolled Steel Base Plate A36 4\ X 4\ - 4 Holes 3/8\ Diameter - Rounded Corners - 3/16\ Thick - 10 pcs

  • The 8" x 8" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting..
  • These steel plates weighs 5.75 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly..
  • These steel plates are an ideal base for painting for it have a smooth, stained-grey finish that makes your paint not to peel or chip off easily. A good top coat will make the best finish and protection on your metal. Steel base plates are essential for many kinds of support, particularly where posts need to be anchored to concrete surfaces. They are especially useful where structures are subject to heavy vibration. They also can be useful for mounting permanently installed equipment..
Check Stock

JACKEL 1/2 HP Pre-Plumbed Sump Pump System (Model: JPACK22S-250V)

  • 1/2 HP Sump Pump w Stainless Steel Housing, Cast Iron Volute, SJE-Rhombus Vertical Switch, Piggyback Plug.
  • Polyethylene Structural Foam Sump Basin ( 18 x 24 in. / 22 Gal. Capacity ).
  • Polyethylene Structural Foam Sump Basin Cover ( 1.5 in. Threaded Discharge Flange, 2 in. Threaded Vent Flange, 2-Hole Cord Grommet, Clear View Removable Inspection Plate and DrainTrap ).
  • 1.5 in. / 1.25 in. Check Valve and 4 in. Inlet Hub.
Check Stock

Patriot Metals - A36 | 1/4\

  • The 4" x 4" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting..
  • These steel plates weighs 0.5 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly..
Check Stock

Champ Instant Floor Plate – for Installing Floor Anchor Pots in New Concrete Slab - Professional - Made in USA

  • STRUCTURAL REINFORCEMENT – It serves as permanent ground reinforcement underneath the concrete slab. Having this plate installed improves the anchor....
  • HELPS BALANCE THE ANCHOR POT – The Champ Instant Floor Plate is the perfect base, distributing the weight of the anchor pot while keeping the anchor....
  • EASY INSTALLATION – Use when pouring a new concrete floor for added strength. Simply install the Floor Plate onto each anchor pot, set anchor pots....
  • SAVE MONEY – This floor plate, along with the anchor pot and lid, is a complete anchoring system that makes do-it-yourself installations easier and....
  • HEAVY DUTY – Whether used in permanent installations or as a floor guide, these instant floor plates are strong and reliable. It is 100% steel, and....
Check Stock

CHABUDAI Japanese Antique Tea Table Folding Legs Asian Floor Low Tea Table Wood (Large：80x40x 33cm, ONE)

  • 100% natural solid wood with beautiful lines. Weight 5-7 kg. The surface of the table is carbonized, waterproof and beautiful and durable..
  • Structural process: wooden,Wooden structure process: smoked / carbonized.
  • How to install: In order to make the table stable, the bottom plate will be slightly larger, you only need to turn the table over, spread the two legs a little bit, the bottom plate will be very easy to insert. (It is best to have someone nearby to help you install it together ) How to disassemble: pull out the bottom plate directly and fold the legs..
  • For hand-made coffee tables, the bottom plate may be slightly larger or smaller (it is usually the appropriate size). If you feel that your table is unstable or the floor is difficult to install, please feel free to contact us! We will provide you with a suitable base plate for free..
Check Stock

Alpinestars Nucleon KR-Celli Motorcycle Back Protector, Black, Large

  • The triple segmented back shell plate is constructed from a high performance polymeric material blend for optimized flexibility and excellent weight saving properties..
  • Unique cell micro-structure designed for advanced energy absorption, adaptivity, maximum breathability and air flow..
  • The ultra-lightweight Nucleon KR-CELLi Protector insert is developed in three waist-to-shoulder dimensions to cover all body sizes..
  • The back protector’s structure design and structural change from center towards the outside provide the perfect balance between force dispersion and energy absorption..
  • Ergonomic protection plate contours to the natural curve of the back ensuring optimum fit while riding..
Check Stock

TPGSW 9 Pack Paper Plate Holder in Black/White 9 Inch Reusable Plastic Paper Plate Holders Home Cabinet Organizers for BBQ Outdoor Cooking Picnic Black 9

  • Plastic Paper Plate Holder: Our plastic paper plate holder is made of polypropylene, which is strong, flexible, stylish and durable. There are tabs....
  • Reusable: The flexible design and strong durability of the paper plate holder make it highly wear-resistant. It can not only be placed in a microwave....
  • Right Size:Our designers have made structural improvements according to the mainstream 9-inch disposable paper trays on the market, so that they can....
  • Easy to carry: Our paper plate holder can be stacked together, no matter where the destination is, you can easily carry it. They make picnics much....
  • Perfect for Any Occasion: Our paper plates holders has a simple design, but very practical in use, bring much convenience to you, which perfect for....
Check Stock

RMP Hot Rolled Carbon Steel Rectangular Tubing, 3 Inch x 2 Inch Sides, 11 Ga. Wall, 72 Inch Length

  • The 3" x 3" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting..
  • These steel plates weighs 0.25 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly..
Check Stock

HECASA 1/2\ New Quick Tach Mount Plate Attachment Skid Steer Loader Compatible with Kubota and Bobcat Skid Steers and Tractors

  • The Brand New 1/2" Quick Tach Loader Mount Plate can easily weld or bolt onto plows, forks, or any attachment that you want to convert to quick tach hookup. Please note this is unpainted..
  • Weight: 125 lb. Outside width: 46". Inside width: 45". Height: 18.5". Top bar:3/8" thick .Plate: 1/2" thick. Its convenient dimensions allow it to be installed and hooked up to the tractor effortlessly..
  • Made of Grade 50 structural steel which enables itself more durable and more corrosion resistant than standard steel. It has a longer lifespan..
  • Fits skid steers with the universal quick tach mounting system and tractors with the skid steer style quick tach..
  • All joints of the attachment mounting plate are solidly welded without safety concerns.Just let our plates share the load..
Check Stock

New 1/2 Skid Steer Mount Plate Quick Tach Attachment Loader Plate Compatible with Bobcat Kubota with One Year Warranty

  • The 1/2" thick mount plate can easily weld or bolt onto plows, forks, or any attachment that you want to convert to quick tach hookup. Specially designed for use on heavy duty items like concrete breakers or stump buckets and other HD attachments..
  • Material: Made from Grade 50 structural steel. It is sturdy enough to handle heavy workloads. When the load is too heavy, you don't have to worry about the plate bending..
  • Using the mount plate, you can add custom attachments. Its skid steer style construction makes it easier to connect pallet forks, plows, grapples, and other parts. If you want to quickly complete the work in the yard, such as transporting waste, clearing debris, or plowing snow, these tedious tasks, you can use your tractor with our mount plate to help you. It will bring you a great experience and a good mood at work..
  • One Year Warranty. If you didn't receive any replies from us for more than one business day, please check your spam because we will reply to every message our customers send and maybe our messages were sorted to spam, thank you very much..
Check Stock

Smartxchoices Pro 5 in 1 Heat Press Machine Combo 360-degree Rotation 12

  • ...s, jigsaw puzzles, lettering, other misc fabrics & materials..
  • DIGITAL LCD CONTROL : Designed with Fully Digital Temperature and Time Control, easy to operate and will bring professional results. Temperature range 200 - 450 Fahrenheit degree (0 - 203 Centigrade), Timer control: 0 - 999 seconds..
  • MORE SECURE- Built-in structural support to maintain flatness. This updated multifunctional heat press features thermal-protective coating, which will reduce the damage caused by overheating and protect your hands. There are 4 foot pads at the rear sides of the chassis to increase stability and avoid tip over when the heating plate is turned to the side..
  • SWING-AWAY DESIGN- Adjustable height and multi-spring pressure knob, can be adjusted according to the thickness of the material, ensures two plates can fit together perfectly. Full 360-degree rotation of swing-away design, allows the heating elements to be moved safely aside and protect your hands as well..
  • WARRANTY & SERVICE- Product dimensions with plate press: 17.5 x 15.2 x 19.1. One-year warranty on controller and heating plate, lifelong online technical guidance and support, feel free to contact us if any problems with the heat press. With a very specific manual with pictures, this heat transfer machine can....
Check Stock

Bobco Metals Hot Rolled Steel Base Plate A36 3\ X 3\ - 4 Holes 3/8\ Diameter - Rounded Corners - 3/16\ Thick - 10 pcs

  • The 4" x 4" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting..
  • These steel plates weighs 0.5 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly..
Check Stock

SKB Alto Sax Rectangular Case

  • Rectangular cases feature recessed area in the lid to create no-slip stackability with inset rubber feet to prevent skidding and protect bottom.
  • Molded-in bumpers add structural strength and protect valances.
Check Stock