Categories

Best Sturdy Puller Tool

YUBRO Manual Weed Digger Hand Tool for Dandelion Plantain

  • Weed Digger Hand Tool:YUBRO weed digger hand tool is made of stainless steel,which is durable and sturdy,the garden keeper could use this weeding tools to dig out the dandelions, thistles, crabgrass and other invasive weeds in garden..
  • Weed Puller Tool Stand Up:Aim the fork to the directly below of weed,and then plug it into the soil,and press the wood handle down,and use sharp fork tips to dig and root, stems and leaves.the principle of leverage save efforts,and the ergonomic wooden handle will reduce the fatigue of grip.
  • Gardening Weeder Tool:Use high-quality bending stainless steel, polished steel and wooden handle. The non-slip engineering wooden handle gives you a comfortable grip and adds the funny of decorating the garden. It is durable and will not rust.There is a small hole at the back of the handle, easy to storage.
  • Y-Shaped Sharp Weed Fork:The shovel has a Y-shaped pointed design. The forged Y-shaped shovel is long and sharp,plug it into the dirt and it is easy to dig out the deepest root of weed.it could even work well in a sturdy gravel yard..
  • Weed Puller Hand Tool: YUBRO weed tool is an excellent tool for removing weeds in the soil, Ideal for prying off and removing dandelions, horse grass, duckweed and other common garden weeds..
Check Stock

CARTMAN Wiper Arm Battery Terminal Bearing Remover Puller Tool

  • Repair tool can remove the stuck battery terminal, also remove bolted-on windshield wiper arms that fit over a tapered spline.
  • Great multi-function small repair tool designed for professional use.
  • Battery terminal puller overall forged by carbon steel is durable and exquisite appearance. It can easily remove stuck battery terminal,also remove bolt on windshield wiper arms that fit over a tapered spline.
  • Sturdy, Durable & Long Time Service -- This Battery Bearing Extractor Puller is made of strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Easy to Operate & Quality Assurance: Jaw opening 6-28 mm for wiper arms with an o/d up to 42 mm.
  • With our battery bearing puller you can get a great helper to handle with difficult tasks.
Check Stock

Gresdent Trim Puller Heavy Duty Pry Bar Home Trim Tile Removal Tool Remodeling Wood Floor Baseboard Molding Nail Pulling and Hex Wrench Tool (Red)

  • ... the puller above the baseboard and tap it with a hammer or mallet.
  • it will slide right behind the baseboard. Gently pull on the tool and the baseboard will pop out of the wall..
  • 【Durable Material】 Made of high quality carbon structural heat-treated steel, it is a very sturdy tool that can withstand repeated whacks and can be used over and over again. The comfortable silicone material can help you hold the handle easily and protect your hand from injury..
  • 【Time & Effort Saving】The larger, flatter contact surface on the puller spreads out the force for more efficient removal, making it possible to do more work with less effort. The 16-degree wedge center facilitates removal of trim and baseboards and preven damage to both trim and walls.p.
  • 【Multifunctional Tool】Not only is it the ultimate removal and remodeling tool, it can also be used as a nail puller and hex wrench for additional help..
Check Stock

Shankly Harmonic Balancer Puller, Crankshaft Pulley Removal Tool or Harmonic Pulley Puller Tool, Steering Wheel Puller Kit with Heavy-Duty Case for Pulley Puller and Installer Kit

  • ✅ HARMONIC BALANCER PULLER SET: This pulley puller, and other tools are designed to handle a variety of jobs, giving the user multiple uses for a single toolset and allowing for the easy and simple removal of steering wheels and crankshaft pulleys.
  • ✅ TIME SAVER: This gear puller tool or harmonic puller eliminates the need for a technician to go through the time-consuming process of first removing the radiator before being able to remove the pulley.
  • ✅ STRONG JAW DESIGN: This harmonic balancer puller jaw design or (tools flywheel puller tool set) provides greater durability, clevis pins allow jaws to be quickly removed and installed, allowing the user to finish the job quickly and effectively.
  • ✅ IDEAL FOR TIGHT SPACES: Shankly's pully puller tool or gear puller is designed to extract damper pulleys in tight engine compartments, the compact design provides more room to work than many harmonic balancer puller tool.
  • ✅ HEAVY-DUTY CASE: This harmonic balancer puller/installer set or puller set sits neatly in a tidy blow molded case with a built-in handle and slide latches making it simple and easy to move and store this tool.
Check Stock

Fiada 2 Pcs Olive Puller Olive Remover Puller Tool Compression Sleeve Puller Ferrule Removal Tool for 1/2 inch and 3/4 inch Brass Pipes

  • Applicable Model: the ferrule removal tool can be applied for brass pipes or copper pipes with diameter of about 15 mm/ 1/2 inch and 22 mm/ 3/4 inch,....
  • No Damage to the Pipe: the compression ring removal tool is an ideal tool for you to remove olives from pipes, allowing you to remove damaged olives....
  • Sturdy for Long Time Use: made of solid brass material, the compression sleeve puller is smooth on the surface, with high strength and hardness, not....
  • Simple to Apply: the ferrule puller is easy to use, no need to read the manual or use other tools to work, saving your time and energy, convenient for....
  • Wide Range of Applications: the olive puller for compression sleeve has a wide range of applications, to increase torque and remove olives more....
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • a 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
Check Stock

VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings

  • Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
  • Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
  • Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
  • Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
  • Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
Check Stock

EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001

  • ...haft sprockets safely with uniform pressure Replaces OEM part number T40001..
  • 【 Heavy Duty 】This puller kit bears high pressure and can deal with stubborn cams. Easily takes off tough cam sprockets that hard to loose without deforming, bending or spreading. Placed in a sturdy blow molded case makes storage and transportation more convenient and organized..
  • 【 Wide Applications 】 Widely suitable for Audi: 80, 100, A4, A6, S6, A8, S8, RS4, RS6.
  • Volkswagen: V6 2.4, 2.6, 2.7, 2.8 Petrol, V8 3.7, 4.2 Petrol.
  • Skoda: Superb. Please refer to the owner’s manual before using..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

  • [Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece....
  • [Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts.
  • [Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength.
  • Machine precision flywheel puller tool....
  • [Fit for Your Tool Kit]: Wheel puller set includes (1) floating swivel, (2) 5/16 by 4 inch (7.9mm x 101mm) bolts, (2) 1/4 by 3 inch (6.3mm x 76mm)....
  • [Blow-Molded Case]: Steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure....
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

AreMe Joy-Con Charging Grip for Switch/Switch OLED, Comfort Joycon Grip Controllers Portable V-Shaped Handle with 3.3Ft USB-C Cable

  • Package Content:1Pcs U type Nail Puller and 1Pcs V type Nail Puller.
  • Advantages:Made of high-quality metal,providing sturdy strength and durability,super lightweight and non-slip design for comfortable use..
  • Application:The Nail Puller tools can easily take off staples from furniture,floor,wooden case,carton,photo frame,carpet and others..
Check Stock

CELLBELL 3PCS Dent Puller, Car Dent Puller Remover Tool, Car Dent Repair Kit, Strong Suction Cup for Tiles, Glass Lifting and Heavy Objects Moving Orange

  • [Powerful Car Dent Puller] Our suction cup dent puller is made of natural rubber and high-quality ABS. The rubber pad seamlessly fits your car, ensuring a strong suction grip while not scratching the paint. Durable ABS can withstand great pressure, and easily pull out the dent from the car..
  • [PORTABLE DENT REMOVER TOOL] You will get 1 large car dent remover(4.5 inches) and 2 small car dent repairs(2.2 inches).Just go with this dent removal kit..
  • [WIDE APPLICATION] The suction cup is a great car dent removal tool. In addition, this suction cup dent puller is good at moving furniture, glass, tile, etc. And it can be used as the door/window handle, cell phone holder, and so on..
  • [EASY TO USE] Clean and heat the dent with hot water, start operation from the shallow concave line then press hard and make sure the suction cup fits seamlessly, gently pull the suction cup up by using the handle, the dent surface will be pulled up with the dent puller..
  • [Sturdy Suction Handle] Consists of a quick-release handle with a spring-loaded locking handle, the dent puller is ergonomically designed, which you can use with one hand, also has a precise structure that provides strong suction.
Check Stock