Categories

Best Sturdy Welding Rod Holder

Paper Towel Holder Under Cabinet, New Upgrade Double Rod Bearing Self-Adhesive or Drilling Wall Mounted Paper Towels Rolls Holder for Kitchen,Stainless Steel

  • New Upgrade Double Rod Design: We adopt screws instead of welding for combination , which make the paper towel holder is enough sturdy to use ,it will not easy fall apart .The double rod with good bearing capacity ,double bearing capacity ,can bear 20lb,the paper towel holder will not easy broke ,suit for hold a big paper rolls ..
  • Two installation option : Self adhesive or Screw Installation .This paper towel holder is able to installed by screw mounted on wall .If you don’t like drilling ,you can stick it on wall or attach the holder on the bottom of kitchen cabinet by using the adhesive tape ..
  • Space Save : This paper towel holder could be installed vertically or horizontally on wall or cabinet , does not take up any counter space .It will be a great space saver if you have limited counter space or small kitchen ..
  • Strong adhesive : The adhesion is strong ,the adhesive paper holder will be adhered well to the underside of the cabinet ,will not easy fall down.Just clean the surface ,peel off the protective film on back and stick it to wall or underneath you kitchen cabinet ,then place paper towel roll on the holder after 24 hours..
  • Material :This paper towel holder is made of stainless steel,waterproof and rustproof ,perfect for used in kitchen or ba....
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

4Pack Closet Shelf Brackets, Heavy Duty Closet Rod & Shelf Brackets, 11 Inch Closet Brackets with Rod Holder, Hanger Pole Support Bracket for Clothes, Wall Mount Closet Rod Brackets with Screws-Black

  • ...led on closet or wall to increasing vertical storage space.
  • Place a clothe rod at the front hook of shelf brackets to add extra storage space.
  • 300LB STABLE TRIANGLE STRUCTURE DESIGN: Shelf and rod bracket holder designed by the most stable triangle structure and integrated welding, ensure using the closet brackets without wavering, each pair of metal closet rod bracket can hold up to high weight capacity of 300lb.
  • WIDELY USED ROD BRACKET HOLDERS: Closet Rod Brackets ideal for kitchen, bedroom, bathroom, storage rooms, outdoor garden.
  • Suitable for display bookshelf, exhibition stand, using in placing small home appliances with board and support closet rods to organize clothes.
  • HARDWARE DECORATIVE BRACKET PACKAGE: Package include 4 pack 11 x 10.6” shelving brackets with rod holder, including mounting hardware (anchors and screws for board or wall).
  • Closet rod support brackets are easy to install and durable to ensure the shelf brackets for a long time using.
Check Stock

THKFISH Fishing Rod Holders for Garage Ceiling Fishing Rod Rack Store 16 Fishing Rod Combos Fishing Rod Rack for Garage Room Boats,1pair-GOLDEN

  • ...ds, just need to hang up. NOTE: You can also alternate the fishing rod butt and tip to provide extra clearance for fishing reels..
  • ENHANCE STABILITY: This fishing rod rack is sturdy and durable. We improved the stability by adding a second-beam to the rod rack, and all the welding joints are reinforced in order to improve its structural strength. The fishing rod rack is made of Iron, and smooth coating keeps the rods and your line from getting scratched..
  • WIDE APPLICATION: This fishing rod rack can mount on the ceiling of your garage, home, cabin, boathouse or shed for your convenience. Suitable for most fishing rods including spinning, baitcasting, fly rods, ice rods, saltwater fishing rod and more! The mounting holes in end makes hanging easy. Easily installed, then you can quickly and easily access the fishing rods..
  • A GOOD CHOICE: A good solution for storing fishing rods. There are a variety of color options (Black, White, Gold), suitable for different household style. The package includes 1 pair fishing rod holder. If you're looking for a premium rod rack, THKFISH provide highest level of customer service and qual....
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

GADFISH Stainless Steel Hitch Fishing Rod Holder, Hitch Mount Rod Holder, 4 Link Tube for 2" Hitch Receivers with Quick Release Pin,Truck Adjustment Fishing Rod Rack, Fishing Pole Holder

  • ...ver, easily stored in trunk with garage and wall mount. Also can store 4 rod tubes, suitable for 1.57" diameter rods.The length, width and height of the fishing rod are 16.54''x12.2''x9.84''..
  • 【Light and Stable】Stainless steel fishing Rod Holder has been tested by welding strength, the pins and fixed shaft firmly lock the rod holder, which can be used smoothly in bumpy and muddy journeys to ensure the stability of the rod..
Check Stock

Welder Gifts Funny Retro Vintage Welding Helmet Silhouette T-Shirt

  • ⭐ Efficient TIG Welding Wire Feed Pen, Small and light body, quickly and easily wire feed, can greatly improve working efficiency..
  • ⭐ Comfortable grip, Ergonomic grip of this TIG Wire Feed Pen, can perfectly fits the finger, very comfortable and anti-slip when using..
  • ⭐ This Welding Rod Holder has the process of Anodized surface finish which makes it beautiful and also rustproof..
  • ⭐ For 1.0-3.2mm welding wire, specially designed for TIG welding and argon arc welding, durable in use, not easy to damage..
  • ⭐Quality after-sale service: If you are experiencing quality issues or any problems, please contact our customer service in time. We will solve all your problems for you..
Check Stock

STINGER Stv002 Electrode Holder Insulated

  • V Securely Holds Electrode, Ergonomic Comfortable Rubber Handle.
  • Amperage: 0 - 350, Electrode Capacity: 5 MIL / 3/16", Cable Capacity: 1/0 ga..
  • Eliminates Arc Burns From Rod "Popping" Out.
  • Molded Thermoset insulating cover set meeting the requirements of your welding projects.
  • Most Heavy Duty Welding Electrode Holder on The Market, Made In The USA.
Check Stock

200A ARC Welding Machine, 110V/220V Dual Voltage Welder, IGBT Stick MMA Welder LED Display with Electrode Holder Work Clamp

  • 【 Digital IGBT Inverter Technology 】This welder has 110/220V dual voltage, using IGBT technology, current control of the welder ,One-button arc starting makes welding more smooth and easy to use. It’s suitable for novice operation. It’s also equipped with overcurrent, overvoltage and overheat protection to ensure the safety of operation..
  • 【Auto Adaptive Arc Force】If the arc function is turned on, the welding rod can achieve the effect of no sticking and no spattering or arc breakage under the condition of ensuring stable welding..
  • 【Heat Dissipation】Built-in thickened serrated radiator, external high-speed silent fan double the heat dissipation, extending the life of the welder..
  • 【Multi Use】The Welder machine is ideal of 6010 7018 welding rod, suitable for mild steel , stainless steel, low alloy steel and other metal material..
  • 【Package】 1 x Stick welder ,1 x Electrode Holder with 10 feet Cable, 1 x work Clamp & 10 feet Cable , 1x Power Cord , 1 x Brush and Hammer , 1 x mask , 1 x carrying strap , 1 x User Manual..
Check Stock

PatchJoy Premium Tig-Pen Welding Finger Feeder | Tig Rod Finger Feeder | Welding Rod Holder | Best Gifts for Welders

  • ⭐ Efficient TIG Welding Wire Feed Pen, Small and light body, quickly and easily wire feed, can greatly improve working efficiency..
  • ⭐ Comfortable grip, Ergonomic grip of this TIG Wire Feed Pen, can perfectly fits the finger, very comfortable and anti-slip when using..
  • ⭐ This Welding Rod Holder has the process of Anodized surface finish which makes it beautiful and also rustproof..
  • ⭐ For 1.0-3.2mm welding wire, specially designed for TIG welding and argon arc welding, durable in use, not easy to damage..
  • ⭐Quality after-sale service: If you are experiencing quality issues or any problems, please contact our customer service in time. We will solve all your problems for you..
Check Stock

Mig Welder Machine Inverter Gas Gasless RBM1500 Mig Stick Tig 4 in 1 Flux Core 220V Supports 2LB Wire Automatic Feed for Beginner

  • [Multiprocess MIG Welding] gasless(flux core wire) and gas(solid wire) welding :supports 2lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel..
  • [Stick Welding] switch to “MMA” on the panel and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well.
  • [Generator Supported] this welder works well with a generator,but we suggest a 5000W above generator【30A breaker suggested for 220V】.
  • [Warranty] buy this welder with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!.
  • Packing List : 1X dual Mig150,1X earth clamp,1X electrode holder,1X welding torch,1X 2lbs flux cored wire,1X welding hose.
Check Stock

20Pcs Copper Welding Rod Selffluxing Brazing Round Welding Rod Low Temperature Welding Consumables for Air Conditioner Refrigerators

  • Package Include: The package includes 20pcs welding rods, which is convenient to replace. Such economical and practical welding rod kit is commonly....
  • Good Fluidity & Easily Use: Standard processing with 2mm diameter, the low temperature phosphor copper welding rod is easy to install and remove. Good....
  • Extensive Applications: Our round welding rod is suitable for electromechanical instrument industry. And it is mainly used for refrigerator copper....
  • Stable Working Performance: This round phosphor copper welding rod adopt phosphor copper material, has stable working performance and is widely used....
  • Regulatory Compliance: This welder rod is entitled with high performance according to strict rule. The rod is designed and manufactured according to....
Check Stock

Eastwood MIG TIG Plasma Welding Durable Cart with 350 Lbs Weight Capacity 3 Shelves Cable and Gas Bottle Storage

  • Designed To Hold Our Welders Plus Our Plasma Cutter On The Same Welding Cart With Maximum Weight Capacity: 350 Lbs.
  • Top Shelf Which Will Hold The Mig135, Mig250, Mig175, Or The Tig-200 Welder.
  • The Bottom Shelf Will Hold The Versa Cut Plasma Cutter.
  • The Middle Shelf Of The Welding Cart Allows Storage Of Necessary Welding Accessories.
  • The Gas Bottle Mount Incorporates A Tig Rod Holder To Store Up To 6 Different Tubes Of Filler Rods.Two Side Hooks For Cable Storage.
Check Stock