Categories

Best Styrofoam Board

Foam Cutter, Upgraded Electric Hot Knife With Button and Power Light, 100-240V/15W Hot Knife 10CM Styrofoam Cutting Pen with Electronic Voltage Transformer Adaptor

  • ♥【Efficient and Smooth】Foam Cutter heats up quickly, the hot wire will reach 150℃ in 10 seconds. It cuts Styrofoam smoothly and quickly, seals the edges cleanly and leaves no debris! You can cut a forming board or foam block from any angle to make the shape you want..
  • ♥【Quality Assurance】 Our foam cutter has joined the official transparency program, with an officially certified T mark. You can rest assured that what you buy is genuine, and there is a QR code to understand the product more quickly, so that you can use the foam cutter more conveniently..
  • ♥【ON/OFF Switch and LED Indicator】On/off switch is on the handle, very convenient to switch on and off, so you don't have to unplug it all the time! There is an LED indicator next to the switch (most foam cutters don't have it), it will Lights up while you're working, so you don't have to worry about forgetting it's turned on or accidentally touching it..
  • ♥【Excellent Quality and Comfortable Grip】The cutting pen/needle/rod is very stable on the base, it will not bend too much when cutting out large pieces of styrofoam. The han....
Check Stock

Five Slot Insect Butterfly Mounting Spreading Board, polystyrene Foam, 11 inches Long x 17 inches Wide (28 x 43 cm)

  • Our board has five grooves measuring from 1/8″ (.32cm) to 5/8″ (1.6cm) accommodating most specimen sizes on a single board..
  • Designed for spreading insect wings prior to mounting. It is ideal for allowing butterfly wings to spread and dry..
  • Place a moth, butterfly, or other insect's body in the indentation on the spreading board, and pin a thin strip of paper over each wing to hold them flat until they dry out..
  • Deep groves cut into a 1-3/4″-thick (4.4cm)styrofoam block allow for perfect positioning of specimens using any pin length..
Check Stock

North Pole Snow Dog Winter Racing: Klondike Husky Sledding Simulator

  • 【6 Sides Heat Insulation to Lock the Temperature】Optimal cold and heat protection for your dog through insulation on all walls, roof and floor, this insulated dog house suitable for all seasons..
  • 【Fully Upgraded to 100% Roof Insulation】4 Layers perfect insulation through total 1.03" thick of roof, of which 0.12" thick of asphalt ,0.2" thick of plywood, 0.59" thick of Styrofoam,and 0.12" thick of plywood board..
  • 【4 Walls & Floor Insulation Protection Against Moisture and Cold 】With 0.47" thick of wood, 0.6" thick of Styrofoam inside, and 0.12" thick of plywood.200% THICKER than un-heated dog kennels!.
  • 【Well Thought Out】Aluminum door frame to prevent puppies from chewing on the kennel.Removable floor for easy cleaning.Adjustable feet balance on all types of surfaces for easy placement..
  • 【All-round Protection】Openable sloping roof repels rain and snow, PVC door curtain and windshield door get away from wind & rain to keep the inside of the dog crate dry and ventilation.
Check Stock

RONGTER Green 4 in 1 Hot Wire Foam Cutter, Styrofoam Cutting Tool Electric Cutting Machine 15W/ 6V With Replacement Heater Wire and Case

  • 【Easy to Use】Rongter 4 in 1 electric styrofoam cutting tool includes a hot wire tip, holing tip, and engraver tip, you can cut any shape you desired. What's more, it is easy to replace the wires or holing tips during working, making the process convenient and time- saving. It comes with a metal support frame for resting the heated tip, so you don't worry about where to rest it when you want a break from your work.
  • 【Smooth and Efficient Cutting】All hot wire foam cutters tips can heat up to temperature 150℃ within 10s. The hot wire cutting pen can cut foam board or foam block from any angle smoothly and efficiently just like butter, seals the edges clearly, and eaves No Debris.
  • 【Sturdy and Safe Design】Upgraded electric styrofoam cutter is made of stainless steel and plastic material with super overheat protection. Designed with a touch button and LED light, provides safety tips when using our foam cutter. No breaking and no taking apart problem.
  • 【Wide Applications】The cutting pen is hot enough to be applied to different kinds of materials, such as foam board, pearl cotton, KT board, EPS, ....
Check Stock

Cooltop Hot Wire Foam Cutter kit,18W Styrofoam Knife Cutter Electric Hot Wire Foam Cutting Tool Heated Foam Carving Knife Kit with Cleaning Pen…

  • 【Smooth and Efficient Cutting】- All hot wire foam cutter tips can heat up to temperature 100℃ within 10s. The Hot wire cutting pen can cut foam....
  • 【Sturdy and Safe Design】- Upgrade Styrofoam Cutter is made of stainless steel and plastic material with overheat protection. Designed with ON/OFF....
  • 【Easy to Use】- 3 in 1 Styrofoam Cutting pen, including Hot Wire Tip, Holing Tip, and Engraver Tip, you can cut any shade you desired. Also it is....
  • 【Wide Applications】- The cutting pen is hot enough to be applied on different kinds of materials, such as foam board, foam block, pearl cotton,....
  • 【Product Usage Tips】- Though our hot wire foam cutter tips have safe design and overheat protection, please read our tips carefully before using:....
Check Stock

Little Giant White Miller Manufacturing Company 9300 Digital Still Air Incubator

  • Digital control board for easy temperature setting self-regulating temperature control.
  • Built-in digital hygrometer measures humidity.
  • Holds 41 large chicken eggs or up to 120 bantam or quail eggs when used with the automatic egg turner (Sold Separately).
  • Made of durable warmth-retaining Styrofoam.
Check Stock

Devoted dogs 2 DVD / Max the Dog + White House Hero favorite canine & A Dog's Purpose 3 Feature Films

  • 【6 Sides Heat Insulation to Lock the Temperature】Optimal cold and heat protection for your dog through insulation on all walls, roof and floor, this insulated dog house suitable for all seasons..
  • 【Fully Upgraded to 100% Roof Insulation】4 Layers perfect insulation through total 1.03" thick of roof, of which 0.12" thick of asphalt ,0.2" thick of plywood, 0.59" thick of Styrofoam,and 0.12" thick of plywood board..
  • 【4 Walls & Floor Insulation Protection Against Moisture and Cold 】With 0.47" thick of wood, 0.6" thick of Styrofoam inside, and 0.12" thick of plywood.200% THICKER than un-heated dog kennels!.
  • 【Well Thought Out】Aluminum door frame to prevent puppies from chewing on the kennel.Removable floor for easy cleaning.Adjustable feet balance on all types of surfaces for easy placement..
  • 【All-round Protection】Openable sloping roof repels rain and snow, PVC door curtain and windshield door get away from wind & rain to keep the inside of the dog crate dry and ventilation.
Check Stock

USA Made Slapfish Skimboard - Fiberglass & Carbon - Riders up to 140 lbs - 41\ with Traction Deck Grip - Kids & Adults - 4 Colors (Blue Board + Arch Bar)

  • Board: 41” length: Rider Weight Limit – up to 140 lbs. 1” Nose Rocker.
  • average board weight is 3-4 lbs. The right amount of rocker to avoid getting caught in the lip of the wave, yet not slow you down..
  • Rider: Board should reach the top of the rib cage on the rider within 1-2 inches to allow for balance. Suitable for the beginners & kids. Performance will support sand skimming, tricks and small wave cutbacks. Plenty of room to grow your tech and skills..
  • Features: MADE IN THE USA. Polished deck, ultra-glide bottom. Professionally installed traction pad included. 20” arch bar optional (Arch Bar will be installed for you if purchased). Slapfish traction is a closed cell, fully sealed EVA grip secured with 3M waterproof adhesive..
  • Materials: Highly durable. Strong PVC core that is fracture rated beyond the board weight limit and is waterproof. This is NOT an EPS (styrofoam) core which will gas out and delaminate over time. No fear of separation or split rails – ever..
  • Offerings: First quality boards, and on occasion, factory blems. A blemished board has minor cosmetic imperfections or a repaired factory flaw..
Check Stock

48 x 36-in Magnetic Dry Erase Board with Pen Tray| Aluminum Frame Portable Wall Large Whiteboard Message Presentation Board for Office & Classroom

  • 【Large Magnetic Writing Board】Magnetic surface allows you to use magnetics to pin notes, messages, pictures, memos, calendars etc..
  • 【Removable Pen Tray】The detachable marker tray can be placed on any of the whiteboard's 4 sides, to keep your writing materials close at hand.
  • 【Fast & Easy Installation 】The wall mounted whiteboard comes with fixing kits, it can be mounted vertically or horizontally on the wall.
  • 【Sturdy Instruction】The aluminum frame give the dry erase board a stylish look.
  • Four ABS plastic corners at the end of the edge, no need to worry about pointy edges..
  • 【BUY IT WITH CONFIDENCE】We take tthe Utmost Care when Shipping the Whiteboards. The white board is shipped in Reinforced Packaging with Styrofoam to prevent damage and warping in shipment.
Check Stock

Melissa & Doug Sunny Patch Spark Shark Kickboard - Learn-to-Swim Pool Toy

  • A colorful kickboard to help children learn to swim.
  • Styrofoam board with colorful polyester casing.
  • Colorfast fabric withstands chlorine and sun exposure..
  • Spark Shark character adds a splash of whimsy..
  • Perfect for developing gross motor skills and confidence in the pool!.
Check Stock

LuckyHigh 110V 30W Hot Wire Foam Cutting Machine Table Top Styrofoam Cutter for Sponge, Pearl Cotton, KT Board, Polystyrene Cutting

  • Hot wire cutter can cut different density and different materials by ajusting heating wire temperature..
  • Max. Cutting Thickness of hot wire cutter: 20cm /8".
  • The cutter heats up to 300°F in 1 minute, pls protect yourself well when working..
  • This foam cutter can cut sponge, styrofoam, EVA foam, KT board, insulation foam, polyurethane and polyethylene, poster board, upholstery foam, PE foam, cushion foam, egg crate foam quickly and smoothly.
  • Hot wire cutter can cut foams to different shapes like cylinders, cones, tapers, cubes and polygons by adjusting the angle of the wire..
Check Stock

RONGTER 4 in 1 Hot Wire Electric Foam Cutter kit, Styrofoam Cutting Tool 15W/ 6V with Case, Heated Foam Carving Knife Kit

  • ...e used with a heating wire to cut about 3.75 inches）, 2 Inch Straight Blade*1, 4 Inch Straight Blade*1, 5 hot wires for replacement, brushes and a holder, plus a tool case for easy storage. We are 24 hours a day to serve you.
  • 【Easy to Use】Rongter 4 in 1 electric styrofoam cutting tool comes with a metal support frame for resting the heated tip, so you don't worry about where to rest it when you want a break from your work. After it cools down, please wipe the heating needle with copper brush to avoid blackening and hardening caused.
  • 【Sturdy and Safe Design】Upgraded electric styrofoam cutter is made of stainless steel and plastic material with super overheat protection. Designed with a touch button and LED light, provides safety tips when using our foam cutter. No breaking and no taking apart problem.
  • 【Wide Applications】The cutting pen is hot enough to be applied to different kinds of materials, such as foam board, pearl cotton, KT board, EPS, EVA, XPS, PE, etc., not for plastic, high-density sponge, memory foam, nylon fabric. You can use it for Halloween costumes, handmade practice, commercial a....
Check Stock

Slapfish USA Made Skimboards - Fiberglass & Carbon with Traction Deck Grip - Kids & Adults - 2 Sizes - Red (50' Board & Arch Bar)

  • 50" length: NO WEIGHT LIMIT. 2” Nose Rocker.
  • 7/8” Tail Rocker. For advanced performance, wave riding, airs, liners & more..
  • Rider: Board should reach the top of the rib cage on the rider within 1-2 inches to allow for balance. Suitable for the beginners & kids. Performance will support sand skimming, tricks and small wave cutbacks. Plenty of room to grow your tech and skills..
  • Features: MADE IN THE USA. Polished deck, ultra-glide bottom. Professionally installed traction pad included. 20” arch bar optional (Arch Bar will be installed for you if purchased). Slapfish traction is a closed cell, fully sealed EVA grip secured with 3M waterproof adhesive..
  • Materials: Highly durable. Strong PVC core that is fracture rated beyond the board weight limit and is waterproof. This is NOT an EPS (styrofoam) core which will gas out and delaminate over time. No fear of separation or split rails – ever..
  • Offerings: First quality boards, and on occasion, factory blems. A blemished board has a minor cosmetic imperfection or a repaired factory flaw..
Check Stock