Categories

Best Subwoofer Amplifier Modules

Monolith M-15 V2 15in THX Certified Ultra 1000 Watt Subwoofer Amplifier, Low Distortion, High Power Output, Vented HDF Cabinet

  • ...15" Woofer: The Monolith 15" driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with three ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 1000 Watt Amplifier: The 1000W RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 6 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you hear massive amounts of bass, not cabinet resonances..
Check Stock

Monolith Powered Subwoofer - 12 Inch with 500 Watt Amplifier, THX Certified, Ideal for Professional Studio and Home Theater

  • THX Ultra Certified: THX engineers completed hundreds of different scientific tests to ensure the highest audio performance possible..
  • THX Certified Ultra products are for large sized rooms, up to 3,000 cubic feet in size, with a 10-12 foot viewing distance from the screen..
  • 12" Woofer: Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with dual ports that can utilize a foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: Each amplifier's transfer function, power output limiting and thermal protection are monitored to the millisecond and are customized for each individual driver..
  • The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
Check Stock

Monolith M-10 V2 10in THX Certified Select 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...Woofer: The Monolith 12" driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500‑watt RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily h....
Check Stock

Monolith M-12 V2 12in THX Certified Ultra 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...Woofer: The Monolith 12" driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500‑watt RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily h....
Check Stock

Monolith 16in THX Certified Ultra 2000 Watt Powered Subwoofer (Matte Black/Painted) Low Distortion, for Studio and Home Theater Systems

  • 16" Woofer: The Monolith 16" driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with four ports that can utilize foam plugs to run the subwoofer in a sealed mode, or tune it as you see fit..
  • 2000 Watt Amplifier: The 2000W RMS amplifier (3800+ Watts Peak) is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 8 years. The amplifier has vast reserves of.
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 2000 watts RMS (over 3800 watts peak), which can deliver massive amounts of power when needed. Each Class D amplifier is built around a Texas Instruments 48 bit data path (with 28 bit filter coefficients) DSP engine, allowing virtually unlimited design flexibility with the assurance of no signal degradat....
Check Stock

RCA RT151 Home Theater System

  • 80W surround system with five speakers and amplifier/subwoofer.
  • Amplifier, audio jacks and controls are built into the subwoofer.
  • two sets of RCA-type audio inputs on rear.
  • Compatible with DVD/CD players, computers and game consoles, satellite/cable boxes and most TVs.
  • Line-in audio jack on front - for iPod and other portable audio players.
  • 80W surround system with five speakers, subwoofer, and amplifier.
  • Compatible with DVD/CD players, computers, game consoles, satellite/cable boxes and most TVs.
  • Line-in audio jack on front for iPod and other portable audio players.
Check Stock

Monoprice 602520 Microphone Stand with Boom

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Kicker 44TCWC102 10 600W Subwoofer + Box + Boss R1100M 1100W Amp + Amp Kit

  • COMPLETE SOUND SYSTEM: Upgrade your car's sound system with this complete amplified bass package bundle that includes: 10" subwoofer, an enclosure, a....
  • CAR SUBWOOFER: This Kicker 2-ohm subwoofer boasts 600 watts max power and 300 watts RMS.
  • CAR AMPLIFIER: The Boss AR1500M Armor Series 1500 Watt Mono Car Amplifier delivers 700 watts RMS at 4 ohms to power your subwoofer. It includes a....
  • SUBWOOFER BOX ENCLOSURE: This Kicker enclosure features a custom port design and is made with sturdy MDF construction and charcoal gray carpet.
  • AMPLIFIER KIT: Install your amp with ease with the competition quality 8 gauge kit that is included in this package.
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

On Air

  • STURDY DESIGN: Underseat vented subwoofer features a die-cast enclosure, 2 passive radiators, and a Class D amplifier.
  • OEM INTEGRATION: Underseat car subwoofer includes high and low-level inputs with hi-level sensing for OEM integration.
  • AMPLIFIER INCLUDED: 150-watt RMS amplifier provides a strong bass, adding thump and intensity to any speaker system.
  • REMOTE CONTROL: Bass knob remote control included to easily adjust the subwoofer's settings.
  • SPECIFICATIONS: Features a blue LED illuminated Tarantula logo.
Check Stock

Monolith 13 Inches THX Ultra Certified 2000 Watt Powered Subwoofer Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ... The Monolith 13 Inch driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, with massive internal bracing, and outfitted with three ports that can use foam plugs to run the subwoofer in sealed, semi sealed, or ported mode, as you see fit..
  • 2000 Watt Amplifier: The 2000 watt (RMS) amplifier (3800+ watt peak) is built around a Texas Instruments 48 bit data path, with 28-bit filter coefficients, and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 8 years. The amplifier has vast reserves.
  • THX Ultra Certified products bring the cinematic experience to large home theaters, up to 3,000 cubic feet in size, with a 10~12 foot viewing distance from the screen*. *Previously known as Select2..
  • 13 Inch Driver: Every part of this driver has been developed from the ground up and customized to deliver high output, low distortion, and accurate bass. Our unique hybrid cone combi....
Check Stock

Eye in the Sky 35th Anniversary Edition Blu-Ray Audio

  • 1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier Power Handling Peak 1300W / RMS 350W Preloaded with a single 12" Subwoofer....
  • Subwoofer Features Cellulose fiber cone Urethane surround Frequency Response 20 - 125 Sensitivity 114dB.
  • Amplifier Features Class D amplifier Cross Overs 0-12dB Bass Boost Remote knob included.
Check Stock