Categories

Best Suction Cup Car Mount

Tablet Holder Car Air Vent Mount,OHLPRO Universal Dashboard Windshield 2-in-1 Cradle, TPU Suction Sticky Gel,for iPad/iPad Mini Samsung Galaxy Size 6"- 10.5" All Tablets

  • 1)2-In-1 Design: this tablet mount with car suction cup mount and car air vent mount ,Can be used on dashboard ,windshield ,and car air vent ,this perfect combination guarantees that all the smartphone can be used..
  • 2)Easy to operate : This car tablet mount can be 360 degree rotation and Sturdy arm can be in 190 degree adjustment , it will not block your view when driving ,it is very convenient to put it at the air outlet, whether you are navigating, listening to music or operating the mobile phone tablet..
  • 3) Durable material : Durable steel POM plastic material,high temperature resistant TPU suction cup.
  • with a strong adhesive glue sticking on most dashboard and windshield ,and the suction cup strong adhesive glue can be in recycling using for the ipad mount ..
  • 4.Universal Compatibility : By extensive testing, 6-10.5 size tablet is compatible . Suitable for Samsung Galaxy Tab 4 3 / iPad Mini / iPad Air 2 / iPad Air / iPad 4 / iPad 3 / iPad 2 iPad Pro, PAD or other tablet devices ..
  • 5)Note: Dashboard car suction cup mount cannot be mounted on leather, wall or film glass surfaces. Sticky suction cups and adhesive holders should be cleaned before using . It is recommended to use a 6-inch to 8-inch tablet at the air outlet. If the large tablet is too ....
Check Stock

Magnetic Phone Car Mount, ACEFAST Universal Phone Car Holder Low Installation Height Built-in Four N52 Super Strong Magnets Large Sticky Base Suction Cup Dashboard Windshield Flexible Installation

  • ... cell phone to ensure the safety of the mobile phone when the car is driving on the road. Please note that wireless charging will not work when the iron pad is attached to your phone or placed inside its case. Please remove the iron pad before wireless charging..
  • Multi-angle and height adjustable. The base above the suction cup can be rotated 360 degrees, and the rotatable stand and ball joint make it much easier to adjust the ideal phone viewing angle..
  • Flexible installation and use. The suction cup base can be firmly attached to the car center console or windshield. Allow car owner to choose how to install and use this magnetic phone car mount on the car. It can even be installed on the desktop at home or office to hold a cell phone..
  • Large sticky base suction cup with strong adsorption force. It can be reused after washing with water. Included circular metal plate (for smaller phones) and a rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone. In order to hold cell phone safely, the phone needs to be installed with iron pad and then attached to the magnetic mount..
  • Powerful suction cup and sticky pad for long time use. The sticky suction cup is double-locked, adsorbs fir....
Check Stock

TORRAS Adhesive Sticky Pad Mounting Disk for Car Dashboard, Suction Cup Pad for Cell Phone Holder Car Mount with 80mm Diameter-One Pack

  • ▶ [PREMIUM STICKY PAD]: When you want a dashboard car phone mount, maybe you are worried about the suction cup of your car mount, which is not stronger, maybe you also afraid that your car dash does not accept to the suction cup of the holder. Now, with the adhesive pad, you never worry about it anymore. Everything is perfect!.
  • ▶ [ SIZE ]: The diameter: 80 mm(3.15 inches), TORRAS 2in1 car phone mount would be suitable for it very well. Also, if you have a smaller suction cup than this size, that still works perfectly..
  • ▶[ WHAT TO NOTE ]: Please don't touch the adhesive with your finger. Select a certain place to install, then don't move again..
  • ▶[PROTECT YOUR CAR FROM DAMAGE]: If you frequently pick up the suction cup from the dashboard, it may damage your car as the time gone, but use the sticky pad, it protects your car from damage..
Check Stock

Sticky Adhesive for Dash Cam Suction Cup Mount, VOLPORT 90mm 3M Circle Heat Resistant Double Sided Extra Strong Mounting Tape Pad Replacement for Car Boat Dashboard Windshield Camera GPS Sucker Holder

  • 【Designed for Suction Cup items】Volport 90mm large size heat temperature resistant 3M sticky adhesives paper for dashboard windshield suction cup mount, make your sucker stronger. You can also adhere the grey adhesive foam tape to the dashboard pad mounting disk. Applicable to most suction cup dashboard stand and windshield long arm mount of dash cam, Action camera, rear view camera, backup camera, GPS navigator, mobile phone, sink sponge holder, basket. You can also cut it to the size you need..
  • 【Genuine 3M Sticky Adhesive Circles 】These 3M VHB very high bond strength double-side adhesive backing stickers for dash cam mount back have high temperature(120℃+) resistance performance, even in Texas, you can use it no worry in hot summer.Stickiness is 40% stronger than ordinary glue, make sucker with super strong suction force. The tape is waterproof, fit for DSLR sports action Cameras, sink caddy, iPad, widely install your DSLR on window, mirror, dashboard even exterior of auto or truck..
  • 【Easy to Install】The adhesion sticker replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive, clean the the surface with alcohol pack before using the new adhesive rounds, after surface is dried, p....
Check Stock

Radar Detector Mount,Windshield and Dashboard Radar Holder,Suction Cup Radar Detector Mount,Compatible with Cobra RAD 480i Radar Detector Mount etc 0.86

  • Compatible: This suction Radar Detector Mount is compatible with most products of Cobra，This Suction Cup Radar Detector Mount width is 0.86in.Please....
  • Industrial-strength suction cup Radar Detector Mount: Paired with APPS2Car's industry leading suction-cup technology,super vacuum,powerful,can be....
  • High Quality: The Radar Detector Mount is made of high quality ABS material, with high impact resistance, high heat and cold resistance. The chassis....
  • Adjustable: The Radar Detector Mount has the metal clip that inserts into the radar detector with the adjustment knob you can adjust the angle of the....
  • Multiple ways of use: 1,The Radar Detector Mount can be used in combination. 2,Windshield Suction Cup Mount Holder can be used alone. The attached 6....
Check Stock

Car Phone Holder Mount [Military-Grade Suction & Stable Hook] Phone Mount for Car Windshield Dashboard Air Vent Universal Hands-Free Automobile Mounts Cell Phone Holder Fit for iPhone Smartphones

  • 3 IN 1 Car Phone Mount: Cell phone holder car is equipped with a suction cup and vent clip, which can be freely mounted on the windshield, dashboard, and air vent for feeding your different usage needs. Cell phone holder is applied to most cars, pickup trucks, SUVs, taxis. A perfect assistant for Uber, Lyft drivers..
  • Enhanced Suction Cup: Phone holder mount is equipped with double-lock suction cup and uses heat-resistant TPU material , which can provide strong suction power on smooth surfaces, and keep the mount stable in any conditions. To restore adhesion, simply rinse the sticky surface with warm water and wipe dry..
  • Perfect Flexibility: Car phone holder with 360 degree ball joint and adjustable telescopic arm, which can adjust your phone to any ideal angle without obstructing your view. The telescopic arm can be extended from 6.5 inches to 8.1 inches. Easily adjust the distance between you and the car mount..
  • Full Protection: Phone mount for car with vacuum silicone rubber and thick panels can provide full protection for your phone from scratches and drops even at high speeds, bumps or turns..
Check Stock

TICILFO Car Phone Holder Mount [Flexible Gooseneck Long Arm] Phone Mount for Car Holder Dashboard Windshield [Washable Strong Suction Cup] Cell Phone Holder Car Mount (Black)

  • ...CILFO phone mount for car uses a 16cm/6.2" aluminum long gooseneck to keep your phone closer to you. It can be securely mounted on the windshield. Best of all, you can bend it in all directions to avoid obstructing your view.
  • Safe & Secure Installation: TICILFO car mount for iphone 13/12/11 series has a super vacuum suction cup with a layer of super sticky gel, locking lever and anti-shake stabilizer. It is made of heat-resistant material, the adhesion is not affected by high or low temperature, and the mobile phone car mount can be removed without leaving any annoying marks. (Note: If the surface of the suction cup is dirty, wash it with warm water, then air dry.).
  • Double Support Points: The anti-shake stabilizer at the bottom of the arm shares the load-bearing of the suction cup, reduces the vibration of the suction cup and the mobile phone, and doubles the life of the car cell phone holder.
  • Perfect Protection: The phone holder for car comes with multiple soft silicone pads to avoid scratching your smartphone or other devices. Perfect for most cars, vehicles, pickups, SUVs, trucks, taxis.
  • Ideal Viewing Angle: The car phone mount has a 360° swivel ball joint that allows you to quickly switch it from portrait to l....
Check Stock

Ramtech Car Windshield Large Suction Cup Mount with Bracket for 6 7 Inch GPS, Compatible with Garmin Nuvi 65LM 65LMT 66LM 66LMT 67LM 67LMT 68LM 68LMT 2639 LMT 2689 LMT 2699 LMTHD, MTSR

  • Brand new car windshield suction cup mount with bracket (Non-OEM)..
  • Large suction cup specially designed to hold select 6 & 7-inch Garmin GPS..
  • Suction cup mount with locking lever for secure adhesion..
  • Suction cup base diameter: 70mm (2.75-inch) / Suction Cup Height: 90mm (3.54-inch).
  • The kit includes 1 suction cup and 1 cradle/bracket mount in bulk packaging..
Check Stock

Windshield Car Tablet Mount, Aozcu Window Dashboard Tablet Holder, 95mm Powerful Suction Mount with 1/4'' Screw Tip for iPad Pro 11/ Air/ Mini, Galaxy Tabs, More 4-13'' Phone & Tablets, and Camera

  • 【Super Stable Suction Cup】Heavy duty tablet mount holder with a super 95 mm vacuum suction cup, which can de firmly attached to the windscreen and dashboard. The metal ball head design is more durable and stable than plastic materials. The clip has a non-slip silicone pad to protect your device and prevent it from shaking during use..
  • 【Multi-Angle Adjustment】Universal tablet mount has a 360 degree rotating metal joint ball and a 180-degree rotating flexible arm. When watching movies, reading and listening to music during the car journey, you can easily get the perfect viewing effect..
  • 【Widely Application】Desk kitchen tablet stand has super adsorption capacity on any smooth surface, such as car windshields, windows, car hoods, glass tables, boat windshields, boat dashboard and tables. The sticky disk for the dashboard makes the suction cup work better for you..
  • 【3 In 1 Broad Compatibility】Car tablet suction holder fits 4-13'' cellphones & tablets with thin or thick case and all cameras, compatible with iPad Pro 12.9/ 11/ 10.5/ 9.7, iPad Air 5 4 3 2, iPad mini 2 3 4 5 6, Galaxy Tab S Series, iPhone 13/ 13 mini/ 13 Pro/ 13 Pro Max/ XS/ XR and more android cellphone & tablets, GoPro Hero 10 9 8 7, Canon, DSLR camera, video light, projector, ....
Check Stock

1Zero 3M VHB Sticky Dashboard Pad for Garmin Tomtom GPS Suction Cup Dashboard Windshield Mount Suction Cup Car Phone Holder [Heavy Duty Tape] Adhesive Mounting Disk Replacement Kit 4 Pcs Pack

  • [2021 Upgraded Superior Stick] - Sticks to dashboard with high quality semi permanent heavy duty 3M VHB 5962 black tape..
  • [Boost Suction Cup Mount Holder] - 1Zero Hard Plastic Dashboard Mounting Disc provide a flat and smooth surfaces for pedestal of suction cup gps mount....
  • [Protect Car Dash] - It is a must have accessory for suction cup phone holder / dashboard gps mount, and it will prevent possible damage that may....
  • [Broad Compatibility] - It provides a 70mm round glass-like surface, works perfectly with most suction cup mount holder stand, such as suction cup....
  • [Important Note] - Each dashboard pad is one time use only. Please wait more than 24 hours to install the suction cup after you installed mounting....
Check Stock

Dashboard Pad Mounting Disk for Suction Cup, 95mm (3.74') 3M Heat Resistant Adhesive Disc for Dash Camera Windshield Holder, GPS, Tablet, Car Phone Bracket Base with Sticky Adhesion Replacement 3 Pack

  • Broad Compatibility: Adhesive mounting disk 95mm fits any suction cup, work with various dashboard surfaces,windshields or windows, to solve the problem of suckers falling off. It provides a 3.74" circular glass-like flat surface for securing dash suction cup phone cradle, windshield cell phone holder, gps navigation ,receiver, car tablet stand, outdoor camera car mount,car decorations, wireless charger , shower wand suction cup holder,phone magnetic mounting system,grab bars,radar detector,ect..
  • 3M VHB Self-Adhesive: These PVC plastic silicone plate with extra strong adhesive gel can hold up to high temperature(120°C). The stickiness of the powerful sticking discs is 40% higher than ordinary two sides sticky glue. The dash mount adapter plate with double-stick tape for car dash is heat proof and waterproof. No matter in hot summer or cold winter, you can use it without worry. Auto ​smartphone mounts glue pad suction pump base is firmly fixed in flat dash, windscreen and more..
  • Easy to Use: The smooth heavy duty dash mounting pad comes with alcohol wipes. Using it to clean the selected dashboard surface before installing, after the surface is fully dry, peel off red adhesive film from the dash suction cup mount plate and attach the vacuum sucti....
Check Stock

Rand McNally Suction Cup Mount for OverDryve 7 Connected Car Tablet GPS - RMOSC

  • Rand McNally car windshield suction cup mount for select Tablet/GPS (Gray).
  • Compatible Rand McNally devices: OverDryve 7/7c/7 Pro/7 RV/8 Pro, TND Tablet 85 GPS, TND 740/750.
  • Attaches to the 3-prong socket magnetic slice mount or DC 200 S E-Log (not included)..
  • Extra large suction cup (90mm base diameter)..
Check Stock

Magnetic Phone Car Mount with Quick Extension Telescopic Arm 1Zero Hands-Free Windshield Dashboard Cell Phone Holder for Car Compatible with iPhone Smartphone Sticky Suction Cup 6 Strong Magnets

  • QUICK ADJUSTABLE SUCTION CUP PHONE HOLDER FOR CAR: No more screw adjusting. Simply push or pull to adjust the telescopic arm from 4.6 to 6.3 inches....
  • INFINITE VIEWING ANGLE: You can pivot the arm in 250 degrees, and rotate your device in 360 degree for your optimal viewing angle. 1Zero magnetic....
  • STRONG MAGNETIC CAR MOUNT: 1Zero magnetic car phone holder has 6 powerful magnets inside which produces an intensive force of attraction that will....
  • POWERFUL SUCTION CUP PHONE HOLDER: The ultra-strong suction cup has a sticky gel base that will stabilize the phone mount on most flat surface, such....
  • UNIVERSAL MAGNETIC CAR PONE MOUNT: 1Zero magnetic car holder has 6 powerful magnets securely hold your phone or GPS on your car dashboard or....
Check Stock