Radar Detector Mount,Windshield and Dashboard Radar Holder,Suction Cup Radar Detector Mount,Compatible with Cobra RAD 480i Radar Detector Mount etc 0.86
- Compatible: This suction Radar Detector Mount is compatible with most products of Cobra，This Suction Cup Radar Detector Mount width is 0.86in.Please....
- Industrial-strength suction cup Radar Detector Mount: Paired with APPS2Car's industry leading suction-cup technology,super vacuum,powerful,can be....
- High Quality: The Radar Detector Mount is made of high quality ABS material, with high impact resistance, high heat and cold resistance. The chassis....
- Adjustable: The Radar Detector Mount has the metal clip that inserts into the radar detector with the adjustment knob you can adjust the angle of the....
- Multiple ways of use: 1,The Radar Detector Mount can be used in combination. 2,Windshield Suction Cup Mount Holder can be used alone. The attached 6....
Check Stock1Zero 3M VHB Sticky Dashboard Pad for Garmin Tomtom GPS Suction Cup Dashboard Windshield Mount Suction Cup Car Phone Holder [Heavy Duty Tape] Adhesive Mounting Disk Replacement Kit 4 Pcs Pack
- [2021 Upgraded Superior Stick] - Sticks to dashboard with high quality semi permanent heavy duty 3M VHB 5962 black tape..
- [Boost Suction Cup Mount Holder] - 1Zero Hard Plastic Dashboard Mounting Disc provide a flat and smooth surfaces for pedestal of suction cup gps mount....
- [Protect Car Dash] - It is a must have accessory for suction cup phone holder / dashboard gps mount, and it will prevent possible damage that may....
- [Broad Compatibility] - It provides a 70mm round glass-like surface, works perfectly with most suction cup mount holder stand, such as suction cup....
- [Important Note] - Each dashboard pad is one time use only. Please wait more than 24 hours to install the suction cup after you installed mounting....
Check StockRamtech Car Windshield Large Suction Cup Mount with Bracket for 6 7 Inch GPS, Compatible with Garmin Nuvi 65LM 65LMT 66LM 66LMT 67LM 67LMT 68LM 68LMT 2639 LMT 2689 LMT 2699 LMTHD, MTSR
- Brand new car windshield suction cup mount with bracket (Non-OEM)..
- Large suction cup specially designed to hold select 6 & 7-inch Garmin GPS..
- Suction cup mount with locking lever for secure adhesion..
- Suction cup base diameter: 70mm (2.75-inch) / Suction Cup Height: 90mm (3.54-inch).
- The kit includes 1 suction cup and 1 cradle/bracket mount in bulk packaging..
Check Stock
eSamcore iPad Holder for Car, Dashboard Tablet Holder for Car Suction Cup Tablet Car Mount with Large Clamp for All 6"-11" Apple iPad Samsung Galaxy Tab Tablet
- ...g mount arm, eSamcore dashboard iPad holder for car will not block your view of the road. You can adjust the tablet car mount arm up and down in 140° through the security lock to fit your dashboard. With 360°rotating ball joint, eSamcore iPad mount for car can also be switched between portrait and landscape view..
- Suction Cup Tablet Car Mount: Simple 3-step lock mechanism provides extremely strong suction power for our eSamcore tablet car holder. The suction cup is coated with a layer of sticky gel to prevent air gaps generation. ❤️️ A flat and clean surface will create a stronger suction power for ipad holder. ❤️️Before installation, Please clean the dashboard and dry it completely..
- Reusable Suction Cup: The suction cup is reusable and washable. If the surface of the suction cup is dirty or lost its stickiness, please rinse it in water and leave the suction cup to dry completely. After that, the suction cup of car tablet mount will restore the stickiness..
Check Stock
Radar Detector Mount,Car Radar mounting Bracket Suction Cup Holder,Windshield & Dashboard Radar Detector Suction Mount,For Cobra Escort Beltronics Valentine One Radar Detector,Easy to Install
- Compatible with Cobra, Escort, Valentine One, and Beltronics Radar Detector, the width of the suction cup mount insertion interface is 0.86 inches, Please confirm the size of the radar detector interface before purchasing..
- Easy to install, suction cup mount designed as a special rotary switch. With the adjustment knob, it can lock the optimal position of the radar detector to make it perfectly match the spacing of the windshield..
- suction cup mount has excellent performance in extremely hot and cold weather conditions, and its powerful vacuum suction can be firmly attached to the windshield or dashboard..
- Our radar detector suction cup mount is made of ABS+alloy material, which is durable,please buy with confidence purchase..
- The suction cups can be washed repeatedly and air-dried to restore suction.Easy to use in the second car..
Check StockEscort Passport 8500 X50 Red Display Radar Detector (Certified Refurbished)
- HIGH QUALITY. Upgraded metal bracket design with larger suction cup size (35mm diameter) for stronger hold on the windshield..
- STRONGER SUCTION. Securely attach your radar laser detector to the windshield. Be sure to apply on a clean, smooth surface..
- DUAL CUP DESIGN. Each suction cup measures 35mm in diameter for improved suction and durability..
- COMPATIBLE DEVICES. This windshield suction cup mount is compatible with all older generation Escort and Beltronics radar laser detectors except Escort Max, Max2, Max360 and Beltronics GT-7.
- WHAT’S INCLUDED. 1x windshield mount with 2 suction cups. Radar Laser detector not included..
Check Stock
SUREWO Flexible Gooseneck Suction Cup Camera Car Mount Compatible with Gopro Hero 11 Black,Hero 10/9/8/7/6/5 Black,DJI Action 3/2,Insta 360 ONE R and Most Action Cameras
- ★ UPGRADED POWERFUL FLEXIBLE GOOSENECK SUCTION CUP: This extension car suction cup mount is made up of 8 adjustable joints and every joint can be rotated 360 degree..
- ★ WITH POWERFUL SUCTION CUP: Strong suction holder,can be strongly adsorbed on any smooth surfaces.Such as glass surface, tile surface, table top and lacquer surface, etc.Can be used in a variety of scenarios,such as cars,boats,jet skis,etc..
- ★ CAN BE USED MULTIPLE TIMES: The bottom of the flexible extension car suction mount is made of washable material, which can be cleaned and reused after use..
- ★ MULTI-ANGLE ADJUSTMENT:The gooseneck car suction cup mount itself has a variety of fixed adjustment positions. With the combination, you can meet any desired shooting angle. Please make the most of your hands-on ability..
- ★ WIDE APPLICATION:This flexible gooseneck suction cup mount is widely suitable for various action cameras, such as gopro hero 10 black, hero 9/8/7/6/5, DJI action 2,akaso/crosstour and so on..
Check StockConrad (Savage Kings MC - South Carolina Book Series 4)
- The GPS long arm suction cup mount with 17mm ball, telescoping arm is adjustable from 4.53 to 6.89 inches and swivels 270 degrees..
- This GPS car mount features an extra strong suction cup with super sticky gel to stably mount your Garmin GPS in the best visual position..
- Package includes: One suction cup mount( main body made of high quality ABS ), wipes( for cleaning mounting surfaces ), installation manual..
- Suitable for Garmin GPS devices with 17mm swivel ball mounting pattern..
- Also works for GoPro Action Camera & car phone holder with 17mm swivel ball mounting base..
Check Stock
Excell Pro-Mount Steel Desk Top Tape Dispenser: 1 in. width (Blue/Grey)
- Excell Pro-Mount Steel Desk Top Tape Dispenser is an industrial-grade steel desk tape dispenser with a suction cup mounting base that’s made for a 3-inch diameter core tape. Simply open the front cover and push down the suction lever. When you want to remove the dispenser, open the front cover and push the suction cup lever up. A separating plate is included with the unit to help release the suction cup from the surface..
- The Excell Pro-Mount Tape Dispenser has almost the exact same specifications and features as the Excell EX-17 Steel Desk Top Tape Dispenser. The difference is that the Pro-Mount Dispenser features one large suction cup to keep the unit stable while in use..
- The maximum outside roll diameter the dispensers can hold is 5 inches so it works great for office supply tapes such as Permacel J-LAR and JVCC CELLO-1. It also works with film carton sealing packaging tapes such as Shurtape HP-500 and JVCC OPP-20C and paper console tapes such as JVCC ART-11. Please note that the diameter of full-length cloth tapes such as gaffers and spike will be too large to fit into the dispenser..
- Please note that the surface and suction cup should be clean and free from dust and debris to ensure a secure hold. The lever requires a firm push-down and a....
Check Stock
ALFA Outdoor Suction Cup Mount for Alfa WiFi Camp Pro 2/3 & ALFA 4G Camp Pro 2+
- 【360° Adjustment】Double ball structure, 360° angle adjustment.
- Can adjust the angle according to different usage scenarios and shooting needs.
- 【Strong Suction and Stable】 It’s much more stable and absorbs much better compared to the Suction Cup Mount.
- Large suction force, stable and reliable, can be adsorbed on the surface of any surface with smooth surface.
- 【Compatibility】The suction cup mount compatible with Gopro 7/8/9/10, DJI OSMO Pocket 2, DJI Action 2, OSMO Pocket, OSMO action cameras, Also some other smart phones, pocket cameras, mirrorless cameras, photography lights and microphones.
- 【Installation Guide】Please install camera suction mount on the smooth,flat surface as glass.
- Note: Please unfasten the PGYTECH Pin before adjusting the position.
- 【Humanized Design】Fully consider storage and carrying, foldable and portable. When not in use, please do not engage the buckle to prevent damage to the performance of the action camera suction cup.
- Note: Static load should not exceed 1.5 KG.
- Recommended ambient operating temperature range: -10℃ / 40℃.
Check StockRand McNally Suction Cup Mount for OverDryve 7 Connected Car Tablet GPS - RMOSC
- Rand McNally car windshield suction cup mount for select Tablet/GPS (Gray).
- Compatible Rand McNally devices: OverDryve 7/7c/7 Pro/7 RV/8 Pro, TND Tablet 85 GPS, TND 740/750.
- Attaches to the 3-prong socket magnetic slice mount or DC 200 S E-Log (not included)..
- Extra large suction cup (90mm base diameter)..
Check StockBOROLA Car Mount Compatible for Tomtom One XL/XL-S/XL-T Windshield Cradle Suction Cup Holder
- 100% Brand New, Made of plastic, very durable and strong.
- Place on the windshild and twist the ring to engage the suction cup..
- Easy to install, perfect replacement for your device..
- Never lose your way! Keep your Garmin Nuvi GPS with you at all time with this windshield suction mount. Just stick the mount to your windshield with the suction cup and lock it in place..
- The windshield mount can be mounted to windshield easily with the suction cup..
Check StockBRCOVAN GPS Suction Cup Mount for Garmin, Dashboard Windshield Air Vent Car Holder with 17mm Ball for Garmin 17mm Swivel Ball Mounting Pattern GPS Mount
- ▶ Kit Includes: One 17mm ball suction cup mount, one 17mm ball air vent clip holder, wipes( for cleaning mounting surfaces ), installation manual..
- ▶ 17mm Ball Suction Cup Mount: Telescoping arm is adjustable from 4.53 to 6.89 inches and swivels 270 degrees. Features an strong suction cup with super sticky gel to stably mount your GPS in the best visual position..
- ▶ 17mm Ball Air Vent Clip Holder: With locking knob design. After inserting the vent, turn the knob to lock the clip and the holder will be firmly seated in the vent position..
- ▶ The 17mm ball suction cup mount & air vent clip holder suitable for Garmin GPS devices with 17mm swivel ball mounting pattern. Also works for GoPro action camera mount & car phone holder with 17mm swivel ball mounting base.
Check Stock
