Categories

Best Super Guide Block

Mssoomm 15mm HGH15 CNC Square Linear Guide Rail Kit 2Pcs HGH15-25.2 inch / 640mm +4Pcs HGH15 - CA Square Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • ...ch）linear guide rail and 4Pcs HGH15CA square type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGW 15 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGH-HA, HGW-CA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you can use splicing technology to make it. The image 7 shows the block stops as....
Check Stock

Mssoomm 25mm HGW25 CNC Square Linear Guide Rail Kit 2Pcs HGW25-116.14 inch / 2950mm +4Pcs HGW25 - CA Flange Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • ...ch）linear guide rail and 4Pcs HGW25CA flange type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGH 25 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The flange square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGW-HA, HGH-HA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you can use splicing technology to make it. The image 7 shows the block s....
Check Stock

Trend H/JIG/C 2-Piece Hinge Jig Skeleton in Case Black

  • EFFICIENT AND FAST: Built-in guide bush offsets on each hinge block, along with the indexed back set discs, ensure superfast setup and maximum....
  • VERSATILE USES: Internal or external doors.
  • Frames and linings with rebates or fitted stops up to 25mm thick.
  • The indexing back set positions cover....
  • PRECISION ACCURACY: Hinge positions are replicated with pinpoint precision on the door and frame from a single set up for increased productivity on....
  • CONVENIENT FOR ANY WORKPLACE: Supplied in a robust carrycase with a 16mm guide bush and securing bradawls, a light duty router such as the Trend T5 is....
  • 3 x Hinge sliding aperture block assemblies.
Check Stock

Velodi Table Inserts (Pack of 2 for 14\ Band saws or Scroll saws（Diameter: 2.5 in, Thickness: 0.1 in），Replace Part 426-02-063-0001 426-02-063-0002

  • 3 guide blocks 1/2″ x 1/2″ x 7/8″ and 1 guide block 1/2″ x 3/8″ x 1-3/4″.
  • Please note the actual dimensions of the Cool Block can be smaller than its nominal dimension by up to 0.05″. For example a 1/2″ Cool Block may measure 0.45″. This is to allow for expansion due to humidity..
  • Item Package Dimension: 5" L x 2.75" W x 1.0" H.
Check Stock

Kreg K5 Pocket-Hole Jig

  • The new Kreg Jig K5 is packed with features your are sure to appreciate.
  • It comes with a convenient front-mounted clamping handle, and it's connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts.
  • The quick-release Drill Guide Block makes set up simple.
  • Front-mounted clamp handle makes clamping easy.
  • Ratcheting clamp mechanism adjusts without tools.
  • Quick-release pin holds drill block in place, and can't get lost.
  • Storage Wings provide built-in storage for bits, screws, accessories.
  • Stop-Collar Setting Block makes drill bit setup easyDescriptionThe New Kreg Jig K5 Is Packed With Features Your Are Sure To Appreciate. It Comes With A Convenient Front-Mounted Clamping Handle, And It'S Connected To A Ratcheting Clamp Mechanism That Adjusts Without Tools Or Lock Nuts. The Quick-Release Drill Guide Block Makes Set Up Simple, And The Removable Support Wings Support Large Work Pieces And Provide Additional Storage Inside. Dust-Collection Is Also Standard, With A Swiveling Dust-Collection Port For Ease Of Use. Adding In The Adjustable Workpiece Stop, Hex-Shank Drill And Driver Bits, A Screw-Selection Chart, And The Durable Construction You Expect From Kreg, And You Have The Most Advanced Kreg Jig Yet..
Check Stock

Iverntech MGN12 400mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail Guide Material: bearing steel. Rail Guide Length: 400mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

Kreg Pocket Hole Plug Cutter Master Pack (KPCS, KPC1060, KPC1040)

  • Special drill guide block guides the plug cutter bits to match the angle of the pocket-hole jig..
  • Special fluting reduces heat and friction for better plugs and longer bit life, and open design ensures easy plug release..
  • Bit tip shears wood fibers cleanly to create a smooth, consistent plug..
  • System includes drill guide block, standard size custom plug cutting bit, stop collar, hex wrench, HD bit and micro bit..
Check Stock

V.Smile Joystick - Pink

  • SUPER LONG RANGE UP TO 2300 FEET - Experience the best in long-range coverage and clarity, provided by a unique antenna design and advances in....
  • SMART CALL BLOCKER AND CALLER ID ANNOUNCE - This system lets you block nuisance callers on the spot with one touch. What more, it can filter robocalls....
  • BLUETOOTH CONNECT TO CELL - Make and receive calls from your cellular plan while enjoying the comforts of a home phone. Pair up to 2 cell phones and....
  • DIGITAL ANSWERING SYSTEM WITH VOICE GUIDE - This cordless system includes a digital answering machine that has a LED message counter, and records up....
  • LARGE SCREENS, BIG TEXT, LIGHTED KEY PAD - High-contrast text on the extra-large 2 inch screen on handset and 3.5 inch screen on base make it easy to....
Check Stock

Usongshine MGN9C Linear Rail Bearing Sliding Block Match use with MGN9 Linear Guide for CNC xyz DIY Engraving Machine (200mm, C-Type)

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail guide material: bearing steel. Rail guide length: 300mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

EZ BLADE Shaving Gel 16 oz

  • ✅NATURAL LEATHER: This leather is genuine cowhide. We use vegetable tanned and fine ground process for smooth and flat leather surface..
  • ✅STURDY BEECH BLOCK: Beech is of high quality wood. The beech base is very durable and the natural wood grain is beautiful..
  • ✅NON-SLIP: We installed anti-slip mats on the bottom of the block. The wood does not move when you sharpen the knife. This reduces the difficulty of....
  • ✅POLISHING COMPOUND & ANGLE GUIDE: We additionally provide polishing compound and angle guide. You don't need to waste money to buy honing compound....
  • ✅3 YEARS Warranty and Superior After-Sale Service: Sharpal headquarters in CA, US with overseas branches in Germany and Australia, aiming at....
Check Stock

Comp Cams-4835 Flat 2 Piece Adjustable Guide Plate Set SBC/289-351W w/ 5/16 Pushrod 7/16 Stud

  • Flat adjustable guide plates for Small Block Chevy and Small Block Ford applications.
  • For high performance Small Block Chevy and Small Block Ford engine applications.
  • Precision die-stamped and heat-treated steel material for a closer setting and improved durability.
  • Can be adjusted inward or outward for maximum convenience.
Check Stock

MGN12H Carriage Block Black for 12mm MGN12 Linear Motion Slide Rail Guide

  • Lower noise when the carriage block is running.
  • Carriage Block black for 12mm MGN12 Linear Motion Slide Rail Guide.
  • Any problem with the product in 30 days, can consult with us.
Check Stock

Kreg Jig K4 Pocket Hole System with Pocket-Hole Screw in 5 Sizes and Face Clamp

  • DRILL GUIDE: 3-hole drill guide for pocket holes.
  • removable drill guide guarantees you'll have the right tool.
  • RECESS: Large clamping recess to secure your jig.
  • REPAIR: Drill guide block doubles as a repair tool.
  • EASY: Requires no glue, no complicated math, and no small army of clamps.
  • BUNDLE INCLUDES: Pocket-Hole Screw in 5 Sizes and Face Clamp.
Check Stock