Categories

Best Supercharger For Ls3 Corvette

ICT Billet LSA Supercharger High Mount A/C Compressor Bracket Kit Compatible with GM R4 CTS-V ZL1 6-Rib Heavy Duty Billet Aluminum Universal Air Conditioner Truck Spacing LS3 LM7 LS 551135-3-R4

  • Install your A/C compressor up on the passenger side.
  • Compatible with LS engines with Truck/SUV (or L99/LS3 Camaro) crank pulley and LSA supercharger – ZL1 Camaro or CTS-V.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • Includes: Heavy duty belt tensioner, A/C compressor brackets, idler pulleys, and mounting hardware.
  • Compatible with GM R4 AND LS Truck Gen 3 & 4, LS3 Camaro, and LS1 Camaro(truck spacing) water pumps.
Check Stock

ICT Billet LS Truck 6 Rib LSA Supercharger Tensioner/Idler Bracket Kit LQ4 LSX 5.3L 6.0L 551789-3

  • Compatible With Truck SUV or LS3 L99 Camaro Crank Pulley.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Compatible with a factory LSA 8 rib Supercharger Belt Tensioner.
  • Includes: idler / tensioner base brackets, idler pulley, and mounting hardware.
  • Compatible with ICT Billet LSA truck or Trailblazer SS alternator and power steering bracket kit.
Check Stock

COMP Cams 1779-16 7 Degree Tool Steel Retainer Set of 16 for 8mm Valve w/ 26926 Springs

  • FITS: for Chevy Camaro Corvette for LS1 for LS2 for LS3 for LQ4 for LS4 for LS6 for L76 for L92 for L99 for LQ9 for L33 for LSA for LS Cam. NOT fit for LS9 cylinder heads..
Check Stock

RJSPHH Pushrod Set 7.400\ Longx .080\

  • 7.400" One Piece Pushrods, 5/16" diameter, and .080" wall (set of 16).
  • made of 4130 Structural Steel material for premium quality and high performance.
  • Replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines. Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92.
  • Compatible with 99-02 Camaro & Firebird, 10-13 Camaro, 99-13 Corvette, 04-06 Pontiac GTO, 04-07 Cadillac CTS-V, 08-09 Pontiac G8, 00-13 Tahoe/Yukon/Escalade, 03-09 H2 , 01-13 Chevrol Avlanche, 99-13 Silverado & Sierra 4.8L/5.3L/6.0L.
  • High Quality, Long Lasting Finish - Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely..
Check Stock

Gen III LS Head Gasket Kit for GM Chevy LS1 LS6 LQ4 LQ9/4.8L 5.3L 5.7L 6.0L 1997-2007 Cylinder Engine Block Valley Cover Gasket 12589226 12612350 12558178

  • ...9227 ,12573460, 12558177 12630223,12633904,12637683.
  • Gasket Set Compatible with Gen 3 Series GM Chevy Vortec LS1 LS6 LQ4 LQ9 4.8L 5.3L 5.7L 6.0L, LS3, LS2, and 6.0L iron blocks, 4.8L/5.3L and LS1/LS6.
  • Fit for 1997–2004 Chevrolet Corvette C5/1998–2002 Pontiac Firebird Formula, Trans Am /1998–2002 Chevrolet Camaro Z28/1998–2002 Chevrolet Camaro SS/2004 Pontiac GTO /2001–2004 HSV GTO /1999–2005 Holden Statesman/2001–2005 Holden Monaro.
  • Fit for 2001–2004 Chevrolet Corvette C5 Z06 /2004–2005 Cadillac CTS V-Series/2007 SSC Ultimate Aero TT.
  • Package: (1)Oil filter adapter gasket#12611384/(1)LS oil galley barbell plug#12573460/(1)Rear Main Crank Seal#89060436/(1)Front Main Crank Seal#12585673/(2)Knock Sensor Grommet# 12558177/(4)Water Block Off Gaskets#12551933/(2)LS Water Pump Gasket #12630223/(1)Front Cover Gasket#12633904/(1)Rear Main Seal Gasket#12639249/(1)Oil Pan Gasket#12612350/(2)Cylinder Head Gasket#12589226/(1)Engine Block Valley Cover Gasket#12558178/(1)Exhaust Manifold Gasket#12617944/(1)Valve Cover Gasket#12637683.
Check Stock

MR HELLO LS Valve Spring Compressor Tool Compatible for Chevy LSX LS1 LS2 LS3 LS6 4.8 5.3 5.7 6.0 6.2 Engine 67605

  • Compatible For:LS Valve Spring Compressor Tool fit LS1 LS2 LS3 LS6 Chevy Chevrolet LSX,4.8 5.3 5.7 6.0 6.2L 67605.
  • LS Compressor Tool Made of stronger steel plates and hardware Strength is better than what you can buy at the market..
  • LS Valve Spring Compressor Tool is for 4.8, 5.3, 5.7, 6.0, 6.2L LS Engines..
  • Compatible with Chevrolet,Silverado,Camaro,GTO,Trans am,Corvette,CTSV,Sierra,Tahoe,Suburban,G8,GM Trucks.
  • 24 hours support: If you have any questions, please contact us.
Check Stock

ProForm Valve Spring Tester, Digital, 1000 lb Range, 1 lb Scale, Springs up to 4 in Tall, Each

  • SPECIFICATION: This is an 8+8 Pieces Set of Brand New Aftermarket Engine Valve Roller Lifters, replacing the hydraulic tappet that does not work or does not work smoothly..
  • MANUFACTURER PART NUMBER: 17122490, 17120735, 17121905, 12499225, 25349994 12564012, 12576400, HL124, H124, H128, HT-2148 JB-2079, HL-2148S, A2148, B2148, 850-16, 10530-16, HL124-16K 77081-61416, 91113, 12639516, 12571595, 12569256 12619820, 12632143, 17122490, 12645725 12680871, HL178, HL177, HL7011S, HT-2303.
  • APPLICATION: LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines.
  • Chevy Silverado 1500 Avalanche Impala Monte Carlo Suburban 1500 Tahoe Trailblazer EXT Avalanche Caprice Camaro Corvette.
  • HIGH QUALITY MATERIALS: Somusen lifters are manufactured from the finest materials and designed for the proper fit and long reliable lifter life..
  • SERVICE: If you have any quality problems after receiving the product, please contact us to solve them..
Check Stock

Brian Tooley LS1 Rocker Arm Trunion & Bolt Kit 4.8 5.3 5.7 6.0 6.2 Trunnion BTR

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Includes Allen Head Bolts.
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Michigan Motorsports Knock Sensor Adapter for 1997-2004 LS1 LS6 Car to LS2 LS3 Knock Sensor

  • Knock Sensor Adapter for 1997-2004 LS1 Car to LS2 Knock Sensor.
  • This harness allows the dual-wire LS2 knock sensors located on side of the LS2 engine block to be plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars..
  • PLEASE NOTE THAT IN ORDER TO USE LS2 KNOCK SENSORS IN A LS1 CAR YOU REQUIRE SPECIAL LS1 PCM SOFTWARE CHANGES OR A LS2 PCM..
  • KEY FEATURES: Fully Plug and Play with the factory harness & sensors Military spec. high-temperature Teflon wire (same type used on oxygen sensors) 24" Length High-temperature (1200F) heat treated protective loom All connections crimped using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability..
Check Stock

Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Akozon Car Supercharger Repair Kit Bottom Cover LR088564 Replacement For L332 5.0 V8 2010‑2012

  • 【Aphare of Appilcation】This Car Supercharger Repair Kit Bottom Cover is specially Replacement For Range Rover L332 5.0 V8 Supercharged 2010‑2012 and so on..For more models please check the Fitment list below,and make sure the model is suitable to avoid inconvenient..
  • 【Aphare of Appilcation】This Car Supercharger Repair Kit Bottom Cover is specially Replacement For Range Rover L332 5.0 V8 Supercharged 2010‑2012 and so on..For more models ....
Check Stock

Ensun 16 Pcs Performance Hydraulic Roller Valve Lifters 12499225 with 4 Guide Trays 12595365 - replacement for - Chevy GM LS1 LS2 LS7 HL124

  • SPECIFICATION: This is an 8+8 Pieces Set of Brand New Aftermarket Engine Valve Roller Lifters, replacing the hydraulic tappet that does not work or does not work smoothly..
  • MANUFACTURER PART NUMBER: 17122490, 17120735, 17121905, 12499225, 25349994 12564012, 12576400, HL124, H124, H128, HT-2148 JB-2079, HL-2148S, A2148, B2148, 850-16, 10530-16, HL124-16K 77081-61416, 91113, 12639516, 12571595, 12569256 12619820, 12632143, 17122490, 12645725 12680871, HL178, HL177, HL7011S, HT-2303.
  • APPLICATION: LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines.
  • Chevy Silverado 1500 Avalanche Impala Monte Carlo Suburban 1500 Tahoe Trailblazer EXT Avalanche Caprice Camaro Corvette.
  • HIGH QUALITY MATERIALS: Somusen lifters are manufactured from the finest materials and designed for the proper fit and long reliable lifter life..
  • SERVICE: If you have any quality problems after receiving the product, please contact us to solve them..
Check Stock

Skull Hug chev.rolet cor.Vette Funny Classic t Shirt, Hoodie, Hooded s Vintage, t-Shirt, Hoodie, Crewneck Sweatshirt 25 Black

  • Men's Graphic Hoodie: This Chevy Corvette Chevy Corvette C1 Thru C8 Flag Emblems pullover hoodie is formed with a combination of modern fashion and traditional style. Chevy Corvette hoodie features an attached draw string hood and a pullover design. Also check out our other Corvette hoodies, men's Corvette T shirts, and men's Corvette jackets!.
  • Material Used: Designer hoodie is manufactured from a unique blend of cotton and polyester fabric that gives you extra comfort and warmth in chilly winters. For giving a sporty look, this classic pullover hoodie is designed with Chevy Corvette C1 thru C8 graphics on the front..
  • Versatile Men’s Hoodie: Chevy Corvette C1 Thru C8 Flag Emblems pullover hoodie comes with 2 front hand warmer pockets and is a prior choice of sports enthusiasts..
  • Performance Corvette Men's Hoodie: Comfortable fit of men’s pullover hoodie encourages for a free-spirited look and passion for cars and racing. Hoodie is provided with 2 in. stretch knit cuffs and waistband..
  • Style and Care: Trendy hoodie is designed in dynamic black color with highly visible Chevy Corvette C1 thru C8 graphics. Wash the Chevy Corvette hoodie inside-out in machine and tumble dry low or hang dry..
Check Stock