Categories

Best Surface Blending Disc

Breville BSB530XL the All In One Processing Station

  • Includes 6 cup processing bowl with Reversible Shredding Disc, Variable Slicing Disc and S Blade to reduce the processing time.
  • Ergonomic Control Grip provides increased stability and control with soft touch finish.
  • Revolutionary bell-shaped blending base combined with internal ribbing reduces suction for greater control and more efficient blending.
  • Adjustable Speed control includes 15 speed settings for precise blending and processing.
  • Ice crushing blades included. Bowl Capacity- 60 ounce food processing bowl. Voltage- 110 – 120 Volts.
Check Stock

Breville BSB530XL the All In One Processing Station (Renewed)

  • Includes 6 cup processing bowl with Reversible Shredding Disc, Variable Slicing Disc and S Blade to reduce the processing time.
  • Ergonomic Control Grip provides increased stability and control with soft touch finish.
  • Revolutionary bell-shaped blending base combined with internal ribbing reduces suction for greater control and more efficient blending.
  • Adjustable Speed control includes 15 speed settings for precise blending and processing.
  • Ice crushing blades included. Bowl Capacity- 60 ounce food processing bowl. Voltage- 110 – 120 Volts.
Check Stock

EZARC Flap Discs 80 Grit, 4 1/2 x 7/8-Inch Flap Sanding Disc, Type 29 Zirconia Grinding Wheel for Stainless Steel, Sheet Metal (10 Pack)

  • 【Great Performance】EZARC flap sanding discs are made of hard zirconia material which lasts longer than standard aluminum oxide abrasive material, built for a more robust and economical grinding wheel..
  • 【 Widely Used】80 grit flap disc is smoother than 40 grit, suitable for light stock remove and other grinding work. Our flap disc is widely used for metal or wood, to remove the weld reinforcement, deburring, polishing, and to rust removal..
  • 【 Fast & Efficient Grinding 】Glass fiber and adhesive form a firm combination, will not pollute the working surface. The fiberglass pad can effectively absorb vibration and bring more stable and efficient grinding..
  • 【 Convenient to Use 】Bevel Type 29 angle design makes the edge and corner grinding much more convenient, great for surface sanding, and working on welded seams at a working angle of 5 to 15°..
  • 【 Professional Grinder Flap Disc 】 4-1/2-inch diameter with a 7/8-inch arbor size compatible with an angle grinder with a maximum 13, 300 RPM grinding speed. This angle grinder flap disc is designed for grinding, blending, sanding, and finishing on a wide range of material..
Check Stock

WORKPRO 20-Pack Flap Discs, 4-1/2-inch, Arbor Size 7/8-inch, T29 Zirconia Abrasive Grinding Wheel and Flap Sanding Disc, Includes 40/60/80/120 Grits

  • ...ntaminate the working surface. Fiberglass backing plate can effectively absorb vibration and bring more stable & efficient grinding.
  • ✅ Great Performance - Each 4.5" x 7/8-Inch arbor size flap disc is compatible with angle grinders operatable of up to 13,000 RPM. Our flap disc set make it ideal for high performance blending and stock removal on metals non-ferrous materials, fiberglass, plastics, woods and other uneven surfaces..
Check Stock

LUCKUT  Flap Disc Grinding Wheels 4-1/2 Inch Flap Sanding Wheel Abrasive Wheels & Discs 4.5'' x 1/4'' x 7/8'' Aluminum Oxide Grinder Wheel for Angle Grinder-10 Pack (40#)

  • ✅ Meet All You Need – This premium flap disc set includes 10 pieces of 40 grit, which can be used for universal applications, ranging from metal or woodworking, concrete grinding or finishing, stone smoothing or finishing, to rust removal and more - perfectly offers all you need for your projects.
  • ✅ Extreme Durability and Value – Made of hard zirconia alumina material which lasts longer than standard aluminum oxide abrasive material, built for a more robust and economical grinding wheel.
  • ✅ T29 Flap Discs with Fiberglass Backing Plate - T29 flap disc features angled flaps, which can be used for edge-working or contoured applications. These discs are also designed with a greater surface area than flat type for stock removal on horizontal surfaces. Fiberglass creates a strong bond with adhesives and does not contaminate the working surface. Fiberglass backing plate can effectively absorb vibration and bring more stable & efficient grinding.
  • ✅ Great Performance - Each 4.5" x 7/8-Inch arbor size flap disc is compatible with angle grinders operatable of up to 13,000 RPM. Our flap disc set make it ideal for high performance blending and stock removal on metals non-ferrous materials, fiberglass, plastics, woods and other uneven.
Check Stock

9Pcs Angle Grinder Carving Disc Kit Including 3 Wood Shaping Grinding Disc, Speedcutter, Wood Carving Chain Disc and 4 Sanding Wheels for 4' or 4 1/2' Angle Grinder for Woodworking Cutting and Shaping

  • ...cular baw blades provides a smooth finished surface, fits for 4-1/2" angle grinders..
  • 【Zirconium Corundum Flap Disc Wheels】Constructed of premium blue zirconium corundum for excellent strength, durability, and extended service life. 60 grit grinding wheels are good & effective alternative for smoothing, sanding, blending, polishing, finishing flat surfaces, deburring contours..
  • 【Application】With rapid cutting and grinding speed, the grinder carving disc kit is great for many materials, suitable for any wood, cutting everything from hardwood, plastic and other soft materials, without worrying about hard places such as wood bumps. Ideal for grinding, carving, and removing small tree stumps. Good wears resistance, can serve you for a long time..
  • 【Package Included】3 x Wood Grinding Wheel(Flat, Inclined, Curved), 3 x Silver Bushing(7/8" to 5/8"), 1 x Speedcutter, 1 x Wood Carving Chain Disc, 4 x Flap Disc Sanding Wheels..
Check Stock

YALUSO Angle Grinder Carving Disc Accessories Attachment 7-Piece Set, for 4-1/2\ Angle Grinder, Including Chain Disc, Wood Shaping Grinding Disc, Flap Disc Sanding Wheels Woodworking Carpenter

  • ... 7/8" (22mm) arbor diameter, 10000~13000RPM recommended, fits for 4-1/2" angle grinders..
  • 【Zirconia Flap Disc Wheels】Constructed of premium blue zirconia for excellent strength, durability, and extended service life. 80 grit medium fineness grinding wheels are good & effective alternative for smoothing, sanding, blending, polishing, finishing flat surfaces, deburring contours..
  • 【Wood Shaping Grinding Disc】2 different grinding plates, color may be gold or rose gold randomly, with tungsten carbide coatings, consists of hundreds of extremely pointed teeth that rapidly remove residues and outlasts hundreds of sandpaper pads. The bevel shape, and slight curvature will allow for comfortable opertion, rapid stock removal and shaping for flat, convex and concave areas, adjusting uneven surfaces effortlessly..
  • 【NOT to Use Switch Lock Feature On Grinders】Eye and face protection are required! When blade hits a nail or wire in wood, the impact will cause the chain to stop as the disc rotates, thereby alerting the user to stop the angle grinder. Therefore, it is NOT advised to use the switch lock feature on any grinder which may result in injury..
Check Stock

WORKPRO 5 Pack Zirconia Flap Disc, 40 Grit, Angle Grinder Sanding Disc, 4-1/2 inch Grinding Wheels, Flap Wheel Type#27 for Metal Grinding, Blending and Smooth Finishing

  • ...e imperfections and deburring. This is a very good choice on carbon/mild steel applications, for less vibration and resulting fatigue, as well as reduced noise..
  • QUICK CHANGE AND SAFETY- From a product performance standpoint, this flap discs with ALUMINUM BACKING plates offer fast stock removal and provide grinding, blending and finishing with one product at a lower cost. They are also lightweight, easy to maneuver, and require less change over time..
  • HIGH-QUALITY ZIRCONIA ALUMINA FIBER MATERIAL-ZIRCONIA ALUMINA Comes with higher efficiency and double abrasion resistance, the excellent blend of zirconia and aluminium oxide grain which provides a very good cut rate to cost ratio. Angle grinder sanding disc made of zirconia alumina has a self-sharpening characteristic, which gives it a long product life and is great for aggressive heavy grinding of metals such as carbon steel and stainless steel..
  • BEST MATCH SIZE FOR ANY TYPE 27- Flat flap discs of T27 are used primarily on flat surfaces, mainly using to polish the plane and the external edges and corners. There will be an angle between the flat louvre and the polished workpiece during work, which can complete the grinding and polishing at one time, so as to simplify work steps..
Check Stock

S SATC Abrasive Wheels & Discs 4-1 2 Inch Flap Disc 10 PCS 4.5" x 7/8" 40 60 80 120 Grit Fast Cutting Speed Zirconia Alumina Grinding Disc for Angle Grinder Type #29

  • Various grit: This premium flap disc includes 4pcs of 40 grit, 2pcs of 60 grit, 2pcs of 80 grit, 2pcs of 120 grit. Different grades ranging from rough to fine can meet almost all your grinding requirements..
  • Durable: 4 1/2 flap disc provides long service life with industrial grade premium blue zirconia for strength, durability..
  • Application: Flap disc for angle grinder is effective for blending, smoothing, finishing flat surfaces, deburring and grinding contours. Abrasive grinding wheel is perfect for radius grinding on steel, sheet metal, welding, machining, heavy duty equipment and industrial maintenance..
  • Convenient: These flap discs are built in angle for greater contact on work surface..
  • Use with:  Each grinder sanding disc measures at 4-1/2-inch diameter with a 7/8-inch arbor size, making it compatible with most angle grinders. Max RPM is 13300..
Check Stock

3M 07531 Roloc Bristle Disc, Yellow

  • ...inch/ 65 mm, the size is appropriate, easy to use and storage, does not take up a lot of space.
  • Quality material: coarse bristle disc is made of rubber and emery material, with good elasticity and toughness, wear-resistant and durable.
  • Abrasive filled brush strips can be effectively applied for deburring, polishing, blending, finishing, cleaning, rusting, etc..
  • Flexible bristles: flexible bristles require less pressure than wire brushes, provide more surface contact than wire brushes, maintain abrasive property for a long time, and can serve you for a long time.
  • Flexible bristles conform to contours, so they produce a consistent finish even on complex parts.
  • Easy to use: bristle spacing is ideal for coating removal and other high-loading substances.
  • Can be applied with most multifunctional tools, such as electric drill, and mini grinders.
  • The recommended speed range is between 15000 - 25000 RPM.
  • And can be quickly and easily replaced for finely finishing..
Check Stock

Walter Surface Technologies 15D044 Backing Pad Assembly - 4 ½ in. Sanding Disc Pad. Abrasive Wheel Pads

  • Components: the set includes a plastic back pad and a 5/8 in.-11 clamping nut. The nut ensures secure mounting of the pad on sanding disc for uninterrupted sanding operations.
  • Sander Backer Pad: the disc pad is specially manufactured for dissipating heat, maximizing the durability of resin fiber sanding discs.
  • Efficiency: back pad works suitably well with 4 ½ in. Coolcut (aluminum oxide) and Topcut (zirconia alumnia) sanding discs from Walter Surface Technologies. This pad is rated for maximum rotational speed of 13300 RPM.
  • Multipurpose: being flexible, the pad can be employed during blending or removal of welds and finishing of erratic or curved surfaces. The backing pad is made from industrial-grade plastic with impact resistance.
  • Specifications: this orange-colored pad measures 4 ½ in. in diameter and weighs 2.82 oz..
Check Stock

Walter Surface Technologies 15D054 Backing Pad Assembly - Round Hole Fastening Flexible Backing Pad. Sanding Accessories

  • Specifications: orange backing pad with 5 in. diameter offers support to the abrasive sanding discs. Round armor hole fastener with 5/8-11 in. clamping nut ensures secure mounting of the pad.
  • Utility: sanding backing pad allows air flow behind the sanding disc for proper heat dissipation. This backing pad is manufactured from high-quality, impact resistant plastic that helps increasing the life of your sanding discs.
  • Versatile: flexible design of the sanding disc pad helps in gentle to aggressive weld removal and blending for finer finishing on both erratic and curved surfaces.
  • Compatibility: sanding back pad works efficiently with 5 in. Coolcut and Topcut resin fiber sanding discs from Walter Surface Technologies.
  • Productivity: mounting pad is rated for its efficiency with maximum 12200 rpm rotational speed. The sander backing pad ensures uninterrupted industrial metal fabrication.
Check Stock

3M Stikit Disc Pad 70234, 5 in x 1/2 in 5/8-11 Internal

  • Provides excellent disc attachment yet allows quick, easy disc removal.
  • Back up pads enable use of 3M Stikit discs (sold separately) on a disc, random orbital, or rotary sander.
  • Variety of densities provides flexibility for varied finishes.
  • Dust Free (D/F) disc pads allow dust extraction capability.
  • Variety of attachment interfaces allow use with common power tools.
  • Holder enables use of 3M Stikit discs (sold separately) on a right angle grinder or sander.
  • Red nylon face material provides excellent disc adhesion for high speed applications yet allows quick, easy removal.
  • Medium density foam provides flexibility when needed for flat or contoured surfaces.
  • Tapered edge offers flexibility and enhances feather-edging and blending.
Check Stock