Categories

Best Surface Finishing Belts

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts – Ultra Fine Grits – 4 Pack Assortment

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Sungold Abrasives 03577 Silicon Carbide Heavy Duty 400 Grit Cloth Sanding Belts, 4 Pack, 2-1/2"X16"

  • Premium silicon Carbide provides sharp cut for excellent finish, especially compared to typical aluminum oxide belts.
  • Heavy duty 100% polyester backing for extra durability. Especially when compared to typical 100% cotton belts.
  • Reversible tape joint is strong and belts can be run in both directions to extend belt life.
  • Anti-static coating reduces loading for a better finish and extended belt life.
  • Excellent for finishing on wood, metal, Putty, composites, Acrylics, paints, primers and for general purpose.
Check Stock

PROXXON Belt Sander BS/E, 38536, Green

  • A light, compact and user-friendly unit that makes sanding in tight spaces more convenient.
  • For shape finishing, mortising, fine polishing (flat surfaces), also for de-burring metal, paint removal and fine finishing.
  • Used in modeling, sculpturing, tool- and die-making or the automotive sector.
  • Speed control for variable speeds from 12 - 25ft/s (225 - 450m/min).
  • Scope of delivery: 1x PROXXON Belt Sander BS/E with 2 sanding belts and storage case. Part number: 38536.
Check Stock

SPTA 110V 800W Professional Stainless Steel Pipe Tube Polisher Sander with Alumina Oxide Sanding Belt Silicon Carbide Wheel Pole Burnishing Polisher Machine

  • ◇What You Will Have◇ 1pc pipe belt sander, 1pc handle, 2pc sanding belts, 2ps carbon brushes and our best service..
  • ◇Good To Use◇ Professional for burnishing, finishing and re-conditioning stainless steel, steel, non-ferrous metals, plastic & wood..
  • ◇Variable Speed◇ Infinitely variable speed control from 700 to 3000 U/min, add more flexibility to our work and operation..
  • ◇Ergonomic Design◇ The handle makes operation more easiler and safer and allows the belt to wrap around the surface to sontact 180 degrees of the....
Check Stock

24 Pack 4 x 36 Inch Sanding Belts (120/240/ 400/600/ 800/1000 Grits) High Performance Aluminum Oxide Sander Belts Grinder Knife Sharpener Belt Kit for Woodworking Metal Wet/dry Polishing

  • Enough for Your Various Needs: it comes with a total of 24 pieces abrasive sanding belt( 4 x 120 grits, 4 x 240 grits, 4 x 400 grits,4 x 600 grits,4 x 800 grits,4 x 1000 grits), the enough quantity can satisfy your general polishing requirements needs.
  • Quality Material: our abrasive sanding belt is made from open coat aluminum oxide grain closed coat, polyester cloth backing, for optimal sanding capacity, delivering quick and long lasting sanding, not easy to break or deform, can serve you for a long time.
  • Practical and Reliable: abrasive sanding belts can be antistatic, sanding belts are designed with polyester cloth backing, suitable for wet and dry sanding.
  • Prevent sandpaper from clogging with dust, removes loose abrasive particles and reduces airborne dust.
  • Widely Applicable: sanding belt is suitable for furniture, automobiles, yachts and other industries of metal and non metallic materials glass, stone, granite, cement, composites, plastics and light metal finishing, various complex surface rust, paint.
  • Universal Compatibility: our sanding belt fits orbital sander, providing a grinding and polishing tool and the sanding disc can be antistatic, washable, you can use it with confidence.
Check Stock

Zylioo Women`s 100% Mulberry Silk Scarves Sun Shade Multipurpose Head-wrap Scarf

  • 100% Mulberry Silk, Knitting Process, The knitted Silk fabric have not Shining surface like Woven silk fabric. But the knitted silk fabric is more Soft, breathable and flexible..
  • Multifunctional and Fashion Square Scarf,Can Use As a Neckerchief or a Sun and Dust Protection Covers. as well as hair scarfs, neck scarfs, shawls, hair bands, veils, belts, ties and so on..
  • Adjustable elastic ear straps to fit all head shapes and sizes.
  • nature silk fabric prevents irritation against the skin..
  • A scarf can be the finishing accessory for many outfits, Attend a party, travel, or go to work, suitable different occasions and bring you different fashions..
  • Size: 20" in length , 20" in width,2" in Face width.(50cm*50cm-5cm)，please wash it with cold water and neutral detergent..
Check Stock

3M File Belt Sander 28366, .6 HP motor

  • Ideally suited for use with 3M abrasive belt and Scotch-Brite(TM) belt.
  • Grind and blend from contact wheel or platen, finish and polish from slack of belt.
  • Grind and blend hard-to-reach areas with power and efficiency.
  • Eight different attachment arms are available.
  • Measures 14-9/16-inches length by 5-61/64-inches width.
  • Great for deburring, cleaning, blending and finishing in tight or hard-to-reach areas.
  • Balanced weight distribution and 3M Gripping Material for improved ergonomics and reduced wrist strain.
  • 360 degree rotatable housing and handle for the ultimate in versatility.
  • Attached belt cover won’t fall off during belt changes.
  • Optimized belt speed for 3M Abrasive Belts and Scotch-Brite Belts.
Check Stock

Sanding Belt Non Woven 2' X 72' Very Fine (Blue) 2-Pack Surface Conditioning Belt for Knife Making, Welding & General Metal Fabrication

  • This is a 2 pack of 2" wide by 72" long very fine surface conditioning belts that leave a 180 - 240 grit finish..
  • Surface Conditioning belts work well to remove coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives..
  • Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results.
  • Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges.
  • Removes surface imperfections, grindlines, mill, and other marks. Non-woven, surface conditioning belts clean, blend, deburr and finish.
Check Stock

3M Trizact 2 X 72 Inch Sanding Belts A30 (P800), A16 (P1200), A6 (P2500) Grit, 3 Pack Assortment

  • 3 Pack Assortment contains 1 each: A30 (P800), A16 (P1200), A6 (P2500) Grit Belts.
  • 3M Trizact technology delivers consistent, superior results | Number one choice of metalworkers worldwide.
  • Excellent for sharpening steel knives | Ideal for finishing soft metals (Copper, Aluminum, Brass, etc.) | Also great for fine finishing of hard metals (Stainless Steel, Carbon, etc.).
  • Pyramid shaped aluminum oxide abrasive breaks down under pressure, exposing fresh, sharp cutting surfaces as it wears.
  • Durable, full flex, JE Weight Rayon cloth backing easily conforms to contoured surfaces.
Check Stock

Dynabrade 79201 1/2-Inch by 18-Inch Belt Assortment Pak, Assorted

  • A convenient sampling of popular coated and non-woven nylon belts.
  • Versatile, high-performance mineral that is sharp, hard and tough.
  • DynaBrite Surface Conditioning Non-Woven Nylon belts.
  • Tough, reinforced Non-Woven Nylon impregnated with abrasive grain and resin.
  • For general purpose material removal and surface conditioning.
Check Stock

Dynabrade 79200 1/2-Inch by 24-Inch Belt Assortment Pak, Assorted

  • A convenient sampling of popular coated and non-woven nylon belts.
  • Versatile, high-performance mineral that is sharp, hard and tough.
  • DynaBrite Surface Conditioning Non-Woven Nylon belts.
  • Tough, reinforced Non-Woven Nylon impregnated with abrasive grain and resin.
  • For general purpose material removal and surface conditioning.
Check Stock

ELW Vegetable Tanned Leather Belt Blanks Strips Straps 5-6oz (2mm) Thickness Sizes 1/2" to 4" W X 52" L,Tooling Leather, Full Grain Veg Tan

  • ✅ 5/6 oz (2-2.4mm) Leather Thickness Weight: Bull Hide Leather. Not Weak as Cowhides. Fit for all Leather Craft Projects Perfect for Tooling, Engraving, Stamping, Molding, Dyeing, Crafts..
  • Pre-Cut Straps/Strips/Belts from 1/2” to 4" Wide and 52" to 84" Length: Natural Beige Color that is easy to Dye | Quickly get to work on your belt blank, strip, strap projects..
  • NATURAL FULL GRAIN LEATHER: Imported from European young steers, bulls. Bull Hide Leather. Not Weak as Cowhides. Tanned with Italian tech and Natural Vegetable Oils..
  • CRAFTSMEN GRADE QUALITY & NON TOXIC: NO HOLES, BEGINNER-FRIENDLY, Eco-Friendly, Safe for your Skin & Pets. Our leather is high in quality with a nice Full Grain & Vegetable Tanned Finishing that is both high in quality and all natural!.
  • APPLICATIONS: Fit for all Leather Craft Projects(Tooling, Engraving, Stamping, Molding, Dyeing, etc.) Such as Belts, straps, strips, utility belts, tool belts, sofa accents, bag straps, gun holsters, bar stool covers, Knife sheath, Gun holsters, Guitar covers, Shoes, Insoles, Hats, Ancient Leather Armors, Jewelry Boxes, Map Tube Boxes, Insoles, Shoes, Hats, iPad Covers, Notebook Covers, Cell Phones Cases..
Check Stock

JET JWDS-2244, 22-Inch Drum Sander With Stand (723540OSK)

  • Line Finishing Tool: this is a versatile tool that works on variable speed, offering a wide variety of line finishes on metallic surfaces. This finishing tool produce a consistent and uniform finish even under load.
  • Power Tool: surface finishing tool is upgraded with powerful and highly efficient motor that performs even toughest surface conditioning job with ease.
  • Applications: sanding tool can be used for graining, cleaning, and producing decorative finishing, industrial-grade line-finishing on cast iron, stainless steel, steel, and non-ferrous metals.
  • Sanding Drum: sander drum can be used with this abrasive finishing tool. The spindle can be locked easily for quick changing of the wheel. Side handle is given for added safety and speed control.
  • Specifications: the speed of the motor ranges from 1,000 to 3,800 RPM and it works at 120V on AC mode. The thread size of the spindle is 5/8–11 in. The power finishing tool weighs 13.23 lbs. and can be used with drums having 3-1/2 to 5 in. diameter.
Check Stock