Categories

Best Surface Metrology

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • ...r data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data ....
Check Stock

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • ...r data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data ....
Check Stock

Fluke Calibration 9144-A-156 Series 9144 High Temperature Field Metrology Well Calibrator with 9144 Type A Insert, 50°C to 660°C Range, 115V

  • Cool to –25 °C in 15 minutes and heat to 660°C in 15 minutes.
  • Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current.
  • True reference thermometry with accuracy to ±0.01 °C.
  • Metrology performance in accuracy, stability, uniformity, and loading.
Check Stock

MeterTo S220-T8 USB LCD Multi-Channel Thermocouple Thermometer Temperature Data Logger 8 Channels -200~+1800℃ ºC or ºF Supporting K,J,E,T,R,S,N,B Thermo-Hygrometer Recording 36,000

  • ...r data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data ....
Check Stock

VTSYIQI Digital Color Meter Colorimeter with Switchable Caliber 4mm/8mm IPS Full Color Touch Screen Auto Calibration Data Storage Function

  • Different apertures Two Apertures / Small Aperture / Big Aperture.
  • Auto calibration . SCI/SCE It supports both SCI and SCE test which is more consistent with result of visual method..
  • Many different kinds of test parameters Opacity, whiteness index, yellowness index and other 30 kinds of test parameters.
  • Provide 26 Kinds of Illuminants for Choice,Guarantee to pass the national metrology.
  • Good repeatability for stable measurement (Delta E*ab 0.08).
Check Stock

HFS (R) 36 PCS Grade B GAGE Gauge Block Set

  • [Accuracy]: AS-2 003e Grade B : +/- 0.000050". Blocks manufactured under carefully controlled conditions, allowing for the highest degree of accuracy when used at room temperatures of 68 degrees F (20 degrees C).
  • [Material]: Set made of fully seasoned alloy tool steel with hardened to 65 RC to provide both long wear and resistance to stains and rust.
  • [Application]: Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. Grade AS-2 gage blocks are commonly used in workshops for calibrating and inspecting mounting tools and cutters..
Check Stock

GLTL Withstand Hi-Pot AC/DC 0-5KV AC20mA DC10mA 100VA Insulation Resistance Tester (110VC tunable Input Power)

  • ●,According to the latest national power industry standards and the design of intelligent voltage test equipment IEC60335J JG795- 2015, JJG690-2003. series voltage withstand test instruments are for general- purpose HV test operation..
  • ●,Widely used in electronic components, electrical manufacturing departments, power operation departments, scientific research units and institutions of higher learning and other industry departments..
  • ●,Third party metrology report can be provided but additional charge is required, please contact us..
  • ●,It has the function of detecting insulation resistance..
Check Stock

HFS (R) 81PCS Grade B GAGE Gauge Block Set

  • [Packing]: 81 Pieces. 9 blocks: .1001-.1009" in .0001" steps.
  • 49 Blocks: .101-.149" in .001" Steps, 19 Blocks: .050-.950" in .050 steps, 4 Blocks: 1-4" in 1" steps.
  • [Material]: Set made of fully seasoned alloy tool steel with hardened to 65 RC to provide both long wear and resistance to stains and rust.
  • [Instructions]: Blocks manufactured under carefully controlled conditions, allowing for the highest degree of accuracy when used at room temperatures of 68 degrees F (20 degrees C).
  • [Grade]: All gage block sets are certified by an accredited ISO-17025 Gage lab with long form certification. Individual serial numbers on each block, regardless of grade.
  • [Application]: Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. Grade B gage blocks are commonly used in workshops for calibrating and inspecting mounting tools and cutters.
Check Stock

OHMLA S10 Portable Mini High-Precision Digital Display Nuclear Radiation Detector Monitor Dosimeter Detect Beta Gamma and X-ray Tester - Test Range 0.01-999 uSv/h

  • PORTABLE DESIGN-It can detect the radiation level of any object or any environment at any time, such as detecting the radiation of....
  • ULTRA-FAST DETECTION-This Geiger anti-radiation detector can detect beta, gamma and X-rays almost instantly, and the radiation dose data is updated in....
  • ULTRA-HIGH SENSITIVITY-HIGH- precision counting, measured and calibrated by the National Institute of Metrology, high data accuracy, automatic alarm....
  • LOW ENERGY CONSUMPTION - LCD display, powered by a single AA battery, easy to replace, low power consumption, less than 70mW..
  • DETECTION RANGE - This digital Geiger counter has an outstanding detection range of 0.01-999 uSv/h. This range is useful for detecting up to 999....
Check Stock

MDF® Iconica Palm Aneroid Sphygmomanometer - German Made Professional Blood Pressure Monitor with Adult & Pediatric Size Cuffs - Black (MDF848IC11)

  • ...r Lifetime Calibration Warranty & Three Year Warranty | Latex-Free.
  • ICONIC BENCHMARK 003e engineered by Bosch + Sohn, this iconic palm aneroid design is 100% German-made and backed by over half a century of craftsmanship..
  • SHOCK PROTECTED 003e featuring Shock Protection Technology certified by the German Institute of Metrology and patented 2-in-1 tube technology eliminates jumping dial during inflation..
  • STRESS TESTED over 3,000 times and calibrated at six pressure points to retain accuracy of +/- 3mmHg (industry standard), without the use of a pin stop..
  • QUICK RELEASE VALVE 003e switch between cuff sizes effortlessly with the quick release valve and increase your efficiency. Adult & Pediatric Size Cuffs included.
  • EASY TO READ with a large high contrast black dial, even in low lighting..
  • UNIVERSAL CUFF is compatible with other brands of blood pressure monitor systems. Adult and pediatric size included..
  • DEPENDABLY ACCURATE 003e Ergonomic palm design enables precise single-hand air inflation, and non-stick screw-type valve delivers precise deflation control rate..
  • HYGIENIC PRACTICE 003e our inflation cuff bladder is easily removable to quickly clean, and high-molecular polymer nylon cuff is moisture resistant and washable, for a more hygienic practice..
Check Stock

SMARTRO SC42 Professional Digital Hygrometer Indoor Thermometer Room Humidity Gauge & Pro Accuracy Calibration

  • ... office, closet, incubator, greenhouse, garden, wine cellar, basement critter terrarium etc..
  • ✨【Calibration Supported】The monitor can be manually calibrated to improve data readings when product placement or environmental factors impact your data accuracy. Calibration certification from Aerospace Institute for Metrology and Measurement Technology. Powered by 2x 1.5v AAA batteries (not included)..
Check Stock

ToAuto 6' 12' 22' 3 Axis Digital Readout DRO Display 5um Precision TTL Linear Glass Scale for Milling Machine,150mm+300mm+550mm, US Stock, 2-4 Business Days

  • 【HIGH PERFORMANCE】3Axis Digital Readout DRO Display 5um,Available Travel Length:150mm+300mm+550mm（6"+12"+22"）.Note: The Total Length =Travel Length+140mm=290mm+440mm+690mm.We can customize the size you need, if you need, please leave a message email, We will give you the most favorable price..
  • 【HIGH PRECISE】Glass precision Metrology Grating，Resolution 5um , Accuracy ±5um/ 0.0002" (at 20 deg C).
  • Pulse signal period 20um , Travelling Speed 100m/min，8 bit LED High-definition nixie tube..
  • 【IDEAL PROFESSIONAL CHOICE】This is a complete kit. You just need to hook the readout system to your machine.It includes one 3 Axis Digital Readout, two scales, protective covers, brackets, etc, an english manual and all the accessories for installation..
  • 【WIDE APPLICATION】Applicable for milling machine, drilling machine, grinding machine, lathes, profile projector, video measuring machine, position monitoring, coordinate measurement, X-Y-Z working table monitor, mechanical control as well as other area of linear scale and rotary encoder..
  • 【US STOCK】We have fast delivery via US warehouses, We will ship directly from the US,0- 1 day handle time, The product will be delivered to you within about 2-4 Business Days..
Check Stock

DRO 3 Axis Digital Readout Display +3pc Glass Linear Scale for CNC Mill Lathe Machine (350+450+950)

  • ...3Axis Digital Readout DRO Display 5um,Available Travel Length:350mm+450mm+950mm（14"+18"+37"）.Note: The Total Length =Travel Length+140mm=490mm+590mm+1090mm.We can customize the size you need, if you need, please leave a message email, We will give you the most favorable price..
  • 【HIGH PRECISE】Glass precision Metrology Grating，Resolution 5um , Accuracy ±5um/ 0.0002" (at 20 deg C).
  • Pulse signal period 20um , Travelling Speed 100m/min，8 bit LED High-definition nixie tube..
  • 【IDEAL PROFESSIONAL CHOICE】This is a complete kit. You just need to hook the readout system to your machine.It includes one 3 Axis Digital Readout, two scales, protective covers, brackets, etc, an english manual and all the accessories for installation..
  • 【WIDE APPLICATION】Applicable for milling machine, drilling machine, grinding machine, lathes, profile projector, video measuring machine, position monitoring, coordinate measurement, X-Y-Z working table monitor, mechanical control as well as other area of linear scale and rotary encoder..
  • 【US STOCK】We have fast delivery via US warehouses, We will ship directly from the US,0- 1 day handling time, The product will be delivered to you about 2-4 Business Days. All Products from the FASTTOBUY will be provided for 2-year ....
Check Stock