EWBN Carbon Fiber Pattern License Plate Frame, Black Smoked Tinted License Plate Cover, License Plate Frame &Cover, Plastic Car License Plate Holder.
- ...ional and decorative license plate frames and covers that will catch everyone's eyes wherever you go..
- Product Specifications- EWBN novelty plate frame cover kit Includes 2 pack Black Tinted License Plate Covers and 2 pack black plastic license plate frame with a surface printed carbon fiber pattern, Including Screws, Screw Caps, Washers, Screwdriver. Each Shield Has Four Mounting Holes, One in Each Corner. Easy to Install and takes just minutes..
- Worry-free shopping- Your satisfaction is our goal. In order to provide customers with a better shopping experience, we will be responsible for all quality issues. Please contact us if you are not satisfied by any quality reason..
Check StockAmarine Made Stainless Steel Cable Cover,Boat Transducer Wiring Cover,Clamshell Vent Wire Cover Clam Shell Vent for Boat (1-3/4\
- Boat access hatch round deck cover hatch made of ABS material,Sleek new black colored finish, anti-corrosive,anti-ultraviolet.that you can rely on for years..
- Marine access cover plate with slip-proof surface which help make safe installation on both horizontal and vertial place. Detachable cover and pre-drilled holes in deck plate easily to install.Reinforced lid with non-skid surface..
- Inspection hatch cover with O-ring sealed deck plates are ideal for interior and exterior applications.Deck plates has eparate cover plate and chassis..
- Marine inspection cover can install this on the rear well area of kayak to access anything that makes its way to the back and to drain any water that gets in easier.round deck cover hatch have so many uses from boat ,sub boxes, secret hiding places..
- Package Includes:1 pcs deck plates for boats,1 pcs O-ring sealed ,6 pcs stainless steel screws ,But be aware that the nominal size is the opening size, not the outside diameter of the hatch.Opening Dia: 6" /151mm :External Dia: 7-4/5" (198mm) ,Cut Out Dia:6-1/3" (161mm).
Check StockRentACoop Heating Plate Kit (16" x 16")
- ???? An alternative to a heat lamp. Less of a fire risk. A heating plate simulates a hen keeping chicks warm and cozy beneath her feathers..
- ???? Chicks stay warm by direct contact with the underside of the plate. The bottom-side surface of the heating plate is hot to human touch but not too hot for chicks.
- ???? Height easily adjusts from 1″ – 7″ with 25 adjustable height settings using the clips on the legs to accommodate the size of your chicks..
- ???? Warms up to 30 chicks. Uses only 42 watts/hr versus up to 250 watts used by a heat lamp..
- ????We recommend optional the plastic plate cover to prevent chicks from roosting and pooping on top of the plate. Chick Heating Plate Kit with Cover is also available on Amazon..
Check StockLimsas Carbon Fiber License Plate Frames Black, 2 Pack Car Plate Frame with Carbon Coasters Front and Rear Slim Thin License Plate Frame Aluminum Metal Rust-Proof Universal Car Tag Holder
- ...tely, they are durable and not easy to rust. Including 2 carbon fiber license plate frames, 4 cup washers, 4 screw caps, 4 screws, 1 screwdriver and 2 coasters. The supporting carbon fiber license plate frame highlight your life style, and reflects the elegance and premium of your car from the details..
- Carbon Fiber Surface - Classic and elegant license plate frames made of stainless steel, surface printed glossy carbon fiber pattern. After professional polishing technology, the surface is smooth and has no sharp edges, no need to worry about scratching your license plate and hands. The carbon car plate frame ensures greater strength and durability, prevents the license plate from rusting or being damaged. A classic look makes your car more elegant and stylish..
- 2 Holes & 0.6 Inch Ultra Slim Edges Design - The thin license plate frame is designed with 2 precise holes and professionally ground, will not scratch your loved car. The ultra-thin border license plate frame is specially designed, and will not cover the state name and registration label or other important parts. A slim license plate cover measuring 12.3”x 6.5”, fits all US standard license plates and you won't be stopped by traffic police because the license plate frame is unqualified..
Check StockCZC AUTO Aluminum Trailer License Plate Light Bracket
- CZC AUTO brand aluminum license plate bracket designed for replacing your Plastic license plate bracket.
- Advantage :More sturdy,long years lifetime and No rusting.
- Exclusive and shinny looks for your trailer.
- Blue film to cover the front and back sides of aluminum tread surface for protecting shinny surface and no crash! Just peel off film before install it.
- Standard size for almost trailer and truck license plate light bracket.
Check StockRentACoop Chick Heating Plate - Warms 20 Chicks - 22 Watts (12" x 12")
- ???? An alternative to a heat lamp. Less of a fire risk. A heating plate simulates a hen keeping chicks warm and cozy beneath her feathers..
- ???? Chicks stay warm by direct contact with the underside of the plate. The bottom-side surface of the heating plate is hot to human touch but not too hot for chicks.
- ???? Height easily adjusts from 1″ – 7″ with 25 adjustable height settings using the clips on the legs to accommodate the size of your chicks..
- ???? Warms up to 20 chicks. Uses only 22 watts/hr versus up to 250 watts used by a heat lamp..
- ????We recommend optional the plastic plate cover to prevent chicks from roosting and pooping on top of the plate. Chick Heating Plate Kit with Cover is also available on Amazon..
Check StockCompatible with Ecobee4 Wall Plate Bracket Cover for Home WI-FI Smart Thermostat, Practical and Dust-Proof Smart Sensor Silicone Mount Holder (Dark Blue)
- 【Especially Design】: This wall plate cover design for Smart Thermostat and SmartThermostat With Voice Control Compatible with Ecobee4. Please confirm your thermostat model before buying..
- 【Function】: The decorative wall plate adopts a matte surface, with a modern and fashionable appearance, and 4 different colors to provide you with options that are most suitable for your home style. The wall plate mount can also conveniently cover the holes left by the thermostat and cover up imperfections around your Thermostat..
- 【Easy to install】: Quick and easy installation, simply align the mounting holes on the wall plate and black plate of the thermostat, pressing them flush against each other and drill the two parts to the wall. No need to paint or do any remodeling work to install the plate..
- 【High Quality Material】: Bracket Cover for Smart Thermostat is made of polycarbonate material, which is more durable, flexible and elastic to withstand any heavy pressure..
- 【Product size】: 6.5*6.5*0.8 inches (16.5*16.5*2 CM)wall plate. Weight: 0.22 lb (100 g). Note: The SmartThermostat Ecobee4 is not included..
Check StockSangle Sopffy Pendant Light Canopy Kit, 5 1/8 Inches Ceiling Lighting Canopy Kit with All Mounting Hardware Modern Chandelier Ceiling Plate Cover for Pendant Lighting Fixtures, Black (Black)
- ...or the assembly of wall lights, vintage lights, ceiling lights, European lights, Chinese lights, DIY lighting fixtures, etc..
- High quality material: The pendant light plate cover is made of high quality wrought iron material, which is strong and not easy to deform, and the surface coating treatment technology can prevent rust and ensure your safe use.The surface of the ceiling light cover plate is black matte, looks clean and shiny, perfectly matched with your chandelier..
- Easy to assemble: The pendant light plate cover comes with complete instructions, and the split design makes chandelier ceiling plate easy to disassemble and assemble, with screws on the beam to keep canopy kit with hardware stable. Wires can be energized through the center hole..
- Size: The ceiling canopy kit includes all mounting hardware , 1*5 1/8in canopy, 1*3.8in offset crossbar, 2*1.6in long screws, two nuts to match the long screws, 2*1in long screws, white rope grip bushings. Note: Please check the size of the ceiling light plate before ordering..
- Warranty and Service:About chandelier canopy kit, we provid....
Check StockNational Hardware N325-431 V1996 Kickplate in Satin Nickel
- Authorized Replacement for Stanley Hardware Stock #N325-431.
- Plastic cover protects finish during installation.
Check Stock12 Well Culture Plate - Culture Plate 12 Well - with Lid, Flat Bottom, Individual Pack (Pack of 10)
- MATERIAL: The culture plate is made of high-quality PS with transparent appearance..
- PACKAGING: Individual package with lid, easy to identify with digital code, irradiated by gamma rays..
- FEATURES: The specially treated surface can ensure the tissue adhesion with good compatibility with most porous plate instruments and equipment..
- EASY TO USE: With the beveled corner design on the right and the one-direction plate cover, it ensures the cover to be placed in a unique direction and moderate tightness between the plate and the cover. The condensation ring is designed to achieve effective ventilation and prevent the evaporation and consumption of culture solution..
- CUSTOMER SERVICE: If you encounter any problem, please don’t hesitate to contact us. We will reply your e-mail in no more than 8 hours since we receive it, and we will help you solve the problem as soon as possible..
Check StockSellstrom Replacement Cover Plates for WHM2000 Welding Helmet, Inner & Outer Plate Set, Clear, S19452
- Features: This replacement clear cover plate kit includes 5 outer and 5 inner cover plates.
- Compliant: Compatible with Sellstrom WHM2000 Advantage Plus Series ADF Welding Helmet.
- Benefits: These replacement cover plates helps prevent surface damage to welding filter plate and auto darkening filters, providing long-lasting value to all your welding products.
Check StockLuxury Stainless Steel Chrome 3D Front License Plate Covers for Toyota. Front License Plate for Toyota
- 【Beautiful Design】Our license plate holder is for special cars, This is a great choice for protecting your license plate holder and showing off your personality..
- 【MATTE FINISH】Premium flat paint on aluminum alloy frame surface. Ensure product quality and beautiful appearance. This is a license plate holder for both men and women..
- 【HIGH QUALITY】Our license plate holder adopts multiple protective layers to ensure no fading or rusting problems. Unique technology makes the surface smoother. Made of high hardness thickened aluminum alloy, the material is light in weight but still durable, which will better protect your license plate..
- 【Easy Installation】The license plate cover measures 6.3 x 12.2 inches (about 15.2 x 30.5 cm) and fits all US and Canada 6 x 12 inches (about 15.2 x 30.5 cm) standards. Our stylists are based on the US license plate feature, which does not block all four corners of the license plate and ensures it is road legal..
- 【Cool Gift】Our license plate holder package includes all mounting accessories, and we also have extra gifts (four tire valve covers). Don't hesitate, just order one piece and enjoy DIY car life..
Check StockAootf Carbon Fiber License Plate Frame- Handcrafted of 100% Real Carbon Fiber Cloth Wrap Aluminum Frames | Stainless Steel License Plate Screws with CF Screw Caps | Gloss Black 2 Holes | Qty 1 Frame
- ...es Benz, AMG, 4RUNNER, AUDI, LEXUS, Front license plate frame or rear frames installation. Improve your car appearance and match with your car's other high quality carbon.
- Cool License Plate Frame: Well Made High Gloss Clear Finish protective coating. The Smooth shiny surface really pops!. Exclusive carbon fiber license plate frame screw caps, license plate frames and cover better match carbon license plate frame. Front license plate frame or rear frames installation. Improve your car appearance and other high quality carbon fiber accessories! Remind-If the frame you received is deformed or defective, feel free to contact us for replacement.
- Carbon Frame Process: True 100% carbon cloth layer vacuum adhesive pressure high-quality aircraft aluminum license plate frame surface, Stronger, Ultra-thin, Ultra-light carbon plate frame. Our license plate frame has 2 special ones back buckle and 4 large-size Anti -rattle Pad to protect from the vibration and will keep quiet.
- Note: The bottom edge of the carbon plate frame is 1.13 inches wide, which may obscure some state names or registration tags. Not Recommended For Using....
Check Stock