Categories

Best Surface Polishing Wheels

Rocaris 1\ Brown 120 Grit Abrasive Buffing Polishing Wheels Burr For Rotary Tools-1/8\(3mm) Shank 50 Pack

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel ,120Grit.
  • 【Abrasivr Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 120 grits,total 50pieces. Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

Amacupid Buffing Polishing Wheel 6 inch,for Bench Grinder/Bench Buffer,1/2 inch Arbor Hole,Cotton White (50 Layers) Yellow (45 Layers)-2 Pack

  • Purpose: The cloth wheel is installed in a bench-top buffer or a bench-top grinder. The polishing wax (a certain compound) is sprayed or pressurized into the rotating polishing wheel. The polishing wheel is used as the carrier of the polishing wax (compound) to complete the surface treatment. Mainly used for surface treatment of jewelry, hardware, plastic, glass and metal, which can produce bright luster on metal and composite materials.
  • Installation: Insert the center hole of the polishing wheel into the adaptor rod of the bench buffer or bench grinder, or the pointed shaft, various transfer shafts. Make sure the installation is tight, then start rotating at a low speed, adjusting the speed as needed for polishing.
  • Quality: The polishing wheels used for polishing are all made of high-quality cotton, and the white polishing wheels are soft and delicate, adding smoothness to your items. The yellow polishing wheel throws away surface debris. The cotton cloth is made of a brand new one piece, and the hole is kept in the center position (the poor polishing wheel, the cotton cloth is patchwork, the center hole deviation is large, the rotation is unstable, and the noise is large).
  • Dimensions: Polishing wheel diameter is 6 inch. (150mm), center hole 1/2 inch. ....
Check Stock

100 Pack Abrasive Wheels, Rocaris 1\ (25mm) Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\(3mm) Shank

  • 【Abrasive Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 5 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, each grit 20 pieces, total 100 pieces..
  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

EMILYPRO Aluminum Polishing Wheel for Drill Chrome Rim Manifold Polishing Kit 3\ x 1/4\ Hex Shank Cone/Mushroom/Column - 3pcs

  • 【Application】The aluminum polishing wheels be used for polishing recessed areas / tight space or gap / irregular surfaces such as mag wheels, motorcycle wheels, car rim, manifolds etc..
  • 【Special Design】The chrome polishing kit are designed as Cone/ Mushroom/ Column shape, great for reach and achieve different space/areas polishing purpose..
  • 【Good Quality】The rim polishing balls are made with fine cotton cloth with furring surface treated, mounted with hex shank with notch cut to make sure not slip off from drill..
  • 【Widely Use】The drill buffing ball are suitable for polishing car rim, wood, plastics, acrylic, ceramics, glass, metals (stainless steel, aluminum, chrome) etc..
  • Column: 2-1/2”. Shank dia: 1/4". Material: Cotton. Package: 3pcs..
Check Stock

JIUNENG 1 inch Abrasive Wheel Buffing Polishing Wheel Set with 1/8inch Shank for Rotary Tool 80 Grit (25mm) 40Pcs

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1"or1-1/2'' in diameter, 25 mm or 38 mm abrasive wheel.
  • 【Abrasive Buffing Wheel Set】25 mm/38mm abrasive wheel with 3 mm silver shank and 4 different grits, Brown 80Grit, Green 150Grit, Red 240Grit, Black 300Grit..
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

SUNJOYCO 75pcs Polishing Kit Buffing Wheels Set Polishing Bit Abbrasive Buffing Wheels Wire Wheel Brush Flap Discs for Dremel Rotary Tool Accessories 1/8\ Shank for Wood Jewelry Metal Rust

  • ...: 10 PCS wire pen brush, 10 PCS wire cup brush, 10 PCS wire wheel brush, 30 PCS abrasive wheel (#120 #180 #320 #400 #800, 5 for each). 10 PCS wool felt mounted mandrels, 5 PCS flap wheels. All wheels are in 1/8"(3mm) shank..
  • Various Size and Grits: SUNJOYCO buffing wheels kit for die grinder includes various buffing polishing wheels and mounted points that are made of brass, abrasives scouring pad, and wool felt, ideal for blending deburring of smaller workpieces. The variety of wheel sizes helps operators effectively finish various parts..
  • Wide Applications: Fit for your polishing need, used for polishing all types of metal and jewelry and non-metallic materials in small areas of rust deburring and surface polishing. Works well in deburring, grinding, sanding, deburring, and stripping. All buffing wheels are in 1/8"(3 mm）shank， which could fit with most Dremel rotary tools and die grinders..
  • High Quality: These polishing and buffing wheels set are made of high-quality industrial brass, Abrasives and wool felt for maximum polishing performance and superior buffing life. The buffing wheels come permanently fastened to a metal spindle so it can be securely run at high speed with die grinders and rotary tools..
  • Satisfaction Guarantee: We provide a two-y....
Check Stock

HIPOGT 100 Pcs Abrasive Wheel Buffing Polishing kit for Rotary Polishing Tool Grinding Accessories 2.35mm mandrel

  • Shanks are 2.35mm, buffing wheels are 22MM diameter, 33 mm abrasive wheel.
  • Abrasive Buffing Wheel Set - Include 100 Pcs of Fiber wheels, Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
  • Repair The Dents - Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing.
  • Convenient And Practical - Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,used with most rotary tools including Rotating..
  • Widely Applications - Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a dremel tool, fit for rotay tools grinder etc..
Check Stock

Buffing Wheel Rake Remove Residual Compounds/Metal from Buffing Wheels/Airway Buffing Pads

  • GOOD POLISHING SET OF SHAPES AND SIZES - Felt Buffing Polishing set with 121 Pieces of compressed Wool rotary tool accessories.1/8"/3mm Shank and hold up fairly to repeated cleaning,reloading&re-using..
  • HIGH QUALITY WITH UNBEATABLE PRICE - Made of high quality compressed felt and metal. These felt polishing buffing pads,wheels and Mandrel Kit are exquisite with high toughness and excellent polishing capability. They work with buffing compound and are nice to get into tight spots. Use until they are too small to use..
  • WIDE APPLICATIONS: Make polished goods to a shine. These Felt Polishing Pad Clean Wheels Point Mandrels are suitable for pneumatic and electric rotary grinders. Best used for various molds,electronics,glass,medical equipment,gold and silver jewelry,metal(brass,bronze,copper,sterling,nickel silver,gold fill... all soft metals.) non-metallic surface grooves,plastics,tapered concavities and other small parts..
  • EASY TO INSTALL AND USE - These polishing wheels set for rotary tool are easy to install and replace. Also for your easy cleaning,we offer a soft cleaning cloth. This whole Felt Polishing Wheels set works as well as the ones,cost less,and come in bigger packs..
  • CLIENTS FOREMOST,SERVICE FIRST - Best product and top service are always what ....
Check Stock

JIALUCONG Abrasive Polishing Buffing Wheel for Dremel - 40pcs 1/8inch Sanding Buffing Wheel - Polishing Wheel or Rotary Tool Accessories - Buffing Polishing Wheel Set

  • Application: metal polishing kit is very suitable for silver jewelry, rust removal, removing metal and wood surface dirt, burr, and removing oxidation of various metal products.
  • such as motorcycle engine, exhaust pipe, polishing golf club, also can clean scale and paint..
  • How To Use: sanding drill bit will produce debris, so you must wear protective glasses and dust-proof equipment, and then put some polishing compound on the rotary tool buffing wheels and start polishing..
  • High Quality Materials: buffing accessories are made of Abrasive, with good performance and technology, strong and durable, which can meet different polishing needs..
  • Buffing Polishing Kit Diameter: buffing wheels are 1 inch, Shanks are 1/8 inch Mandrel Polishing Wheels fits dremel accessories, polishers, hand drill, flexible shaft, electric grinders etc..
  • Package Included: total 40Pcs buffing wheel. 10pcs (Brown 120Grit).
Check Stock

Amacupid Buffing Polishing Wheel Kits 3 inch for Mini Bench Grinder/Electric Dril Sharpening Knives Rust Removal Polishing.for Home DIY Grinding Polishing Father s Day Gift

  • Application: Buffing polishing wheel is installed on the mini bench buffer, bench grinder or hand electric drill, used to grind, rust, polish and clean various tools and objects. It is widely used in the surface treatment of cast iron, stainless steel, brass, aluminum and other metals, as well as glass, wood, plastic and other non-metallic surfaces. For example, grinding drill bits, various knives, polishing golf clubs, cleaning furniture, jewelry, and meeting all polishing needs.
  • Rough grinding: All three kinds of grinding wheels are 80 mesh, M grade. It can be used to grind various metals and non-metals, such as alloy steel, ordinary carbon steel, hardened steel, stone, etc., for rough grinding of tools, knives, abrasive tools, parts. Note: Cracked or damaged grinding wheels cannot be used on the machine. Maximum speed is 8917 (r/min).Use the circumferential surface for grinding, rust removal and polishing. Do not use the flat surface of the grinding wheel for operation.
  • Fine polishing: fiber wheel/wool wheel, can be used for fine buffing of metal, wood, and plastic surface decoration. The effect of wire drawing polishing, deburring, cleaning, rust removal, etc., is the transition polishing between the grinding wheel and the cloth wheel. Cotton polis....
Check Stock

121pcs Wool Felt Polishing Buffing Wheel Pad Mandrel Mounted Grinding Accessories Attachment Rotary Tools Set for Dremel

  • GOOD POLISHING SET OF SHAPES AND SIZES - Felt Buffing Polishing set with 121 Pieces of compressed Wool rotary tool accessories.1/8"/3mm Shank and hold up fairly to repeated cleaning,reloading&re-using..
  • HIGH QUALITY WITH UNBEATABLE PRICE - Made of high quality compressed felt and metal. These felt polishing buffing pads,wheels and Mandrel Kit are exquisite with high toughness and excellent polishing capability. They work with buffing compound and are nice to get into tight spots. Use until they are too small to use..
  • WIDE APPLICATIONS: Make polished goods to a shine. These Felt Polishing Pad Clean Wheels Point Mandrels are suitable for pneumatic and electric rotary grinders. Best used for various molds,electronics,glass,medical equipment,gold and silver jewelry,metal(brass,bronze,copper,sterling,nickel silver,gold fill... all soft metals.) non-metallic surface grooves,plastics,tapered concavities and other small parts..
  • EASY TO INSTALL AND USE - These polishing wheels set for rotary tool are easy to install and replace. Also for your easy cleaning,we offer a soft cleaning cloth. This whole Felt Polishing Wheels set works as well as the ones,cost less,and come in bigger packs..
  • CLIENTS FOREMOST,SERVICE FIRST - Best product and top service are always what ....
Check Stock

Lathe Round Bristles Polishing Brush B27 Wood Center Dental Laboratory 12 Pack

  • 【 66Pcs Polishing Brushes 】：In this kit, You will get 60Pcs 6 Mixed Grit Radial Bristle Disc kit, These polishing brushes have 6 different grit with 6 various colour and every grit has 10 pieces for different needs. Including Green: 80 Grit.
  • Meanwhile you will get 6Pcs 1/8"" Shank perfect for Rotary Tools..
  • 【 46Pcs Polishing Brushes 】：In this kit, You will get 40Pcs 4 colors Silicone Rubber Polishing Wheels and Polishing Particle , Including Brown, green, black, white, 10Pcs for each color, In total 40Pcs. Come with 6Pcs Mandrel Shank. Applications, Hobby & Craft, in Dental Labs and by Model Makers..
  • 【 High Quality 】：Stable quality, fine craftsmanship, good wear resistance, strong grinding force, high temperature resistance, good heat dissipation and precise concentricity. The workpiece will not be burned and cracked, which can make the workpiece show surface finish such as mirror surface..
  • 【 Easy to Use】：Bristle disks can be stacked, flexible, cool, durable, and provide a uniform finish. Use as many disks as you can on the spindle as you need, and use them like a natural bristle brush, without any compounds - these compounds have been immersed in the disc material. The different....
Check Stock

58 Pieces Buffing Wheels Set Little Polishing Buffer Wheel Kit Buffing Wheel for Drill Rotary Tool Mini Brush Polishing Kit for Watches and Jewelry Abrasive

  • [Easy to install]:The polishing wheels are 1/2" center hole fits most bench grinder..
  • [Professional design]: The polishing wheels much thicker to last longer and provide larger surface area. Thick concentric sewn circles design holds plys together more stiffly so greater pressure can be applied..
  • [Usage]:Polishing and buffing wood,metal, cast iron,brass, aluminum bronze and stone etc.
  • [Make your work easy]:The extra thick buffing polishing wheels are 70 ply, Extra plys can improve work efficiency..
  • DIAMETER:6 inch Face,1/2" Arbor Hole, H: 1" (70 ply) Material: Cotton. ***Attention: Due to its fine cotton buffing wheel, it would have a little flying fibre during first time working..
Check Stock