Categories

Best Surgical Electric Saw Drill

Hitachi 49C60 LVDS Cable Ribbon (Main Board to Panel)

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

Portable Reciprocating Saw Adapter with Reciprocating Saw, Multifunctional Woodworking Reciprocating Electric Drill, Household Plug-in Cutting Machine Tools

  • Portable: This portable reciprocating saw kit changed electric drill into a reciprocating saw.
  • Multiple Tools: Including 1pcs reciprocating saw Kit, 3pcs reciprocating saw blades, 1pcs wrenc.
  • Easy to Carry and Use: Ergonomic handle which is very convenient and safer for carrying..
  • High Output Power: Its input power depends on your own electric drill, so it is not a certain number. Fit for wood, metal cutting..
  • High Efficiency and Excellent Safety Performance: Safety of sawing, effectively improve the efficiency of your work. Compared to traditional electric saw,this Reciprocating Saw is light and portable..
Check Stock

40mm HSS Tungsten Carbide Hole Saw, TCT Cutter Drill Bit for Metal Stainless Steel Wood Aluminum

  • ❶SIZE: 40mm(1-9/16”) hole saw diameter, 86mm(3.38”) length, 10mm(0.39”) shank..
  • ❷RESISTANT and DURABLE: hole saw is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance..
  • ❸PRECISE and EFFICIENT: tungsten carbide teeth of the hole saw is able to cut clean, round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet, copper and brass..
  • ❹WIDE RANGE of APPLICATIONS: hole saw kits are suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine..
  • ❺ALL IN ONE DESIGN: drill bit, spring, wrench are included, no need to buy extra accessories..
Check Stock

Reciprocating Saw Adapter Handheld Portable Woodworking Accessory Electric Drill Tool 800-1500 RPM Plastic + Iron for Wood Cuting

  • 【CONVENIENT TO USE】--Very convenient and safer for use, reciprocating saw adapter is equipped with non-slip handle.
  • 【COMFORTABLE DESIGN】--Supports simple operation, safe reciprocating adapter saves time and effort, practical and useful.
  • 【APPLICATION】--Reciprocating saw adapter can be used for wood cutting, metal pipe cutting, PVC cutting, steel cutting,etc.
  • 【RECIPROCATING SAW】--This reciprocating saw kit can change the ordinary electric drill into reciprocating saw.
  • 【HIGH DURABILITY】--Built to strict quality control standards, electric drill s aw-blade adapter keeps high durability and easy connection.
Check Stock

POWERTEC 70108 4 Inch Blast Gate for Dust Collector/Vacuum Fittings

  • Carbon Brush Size (Approx.): 10 x 5 x 5mm / 0.39" x 0.2" x 0.2" (L*W*H).
  • Package Content: 10 x Motor Carbon Brushes.
  • Carbon motor brushes are one of the most commonly replaced power tool components..
  • Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor and restore a motor’s electric braking..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and ..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

uxcell 10Pcs Carbon Brushes,for Electric Motor,20mmx6mmx6mm,Power Tool,Replacement Repair Part

  • Carbon Brush Size (Approx.): 20 x 6 x 6mm / 0.79" x 0.24" x 0.24" (L*W*H).
  • Carbon motor brushes are one of the most commonly replaced power tool components..
  • Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor and restore a motor’s electric braking..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and ..
Check Stock

uxcell Carbon Brushes for Electric Motors 13mm x 7.5mm x 6.5mm Replacement Repair Part Set of 10

  • Carbon Brush Size (Approx.): 13mm x 7.5mm x 6.5mm(L*W*H).
  • Package Content: 10 x Motor Carbon Brushes.
  • Carbon motor brushes are one of the most commonly replaced power tool components..
  • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and angle grinder..
Check Stock

TCT Hole Saw Kit, LAIWEI Carbide Stainless Steel Hole Saw, Electric Metal Drill Saw, Tungsten Alloy Hole Cutter, Carbide Tipped Hole Saw Drill Bit Tungsten Carbide Tipped Hole Saw Drill Bit (14pcs)

  • ⭐ Hole Saw ----- LAIWEI TCT Hole Saw Kit (Carbide Hole Saw) Includes 10 Hole Saws: 16mm Hole Saw, 18mm Hole Saw, 20mm Hole Saw, 25mm Hole Saw, 30mm Hole Saw , 35mm hole saw, 45mm hole saw, 50mm hole saw, 55mm hole saw, 60mm hole saw and 2 drill bits and wrenches..
  • ⭐ Carbide Stainless Steel Hole Saw ----- Sharp tungsten alloy blade can easily cut steel, iron, aluminum, copper and cast iron. The depth of cut reaches 25 mm..
  • ⭐ Drilling --- Spring pilot drill removes chips and saves time. The hole knife cuts cleanly without burrs..
  • ⭐Precautions for electric drill air saw: Use perpendicular to the parts, use cutting oil when cutting metal materials, and start cutting at low speed. Stainless Steel Hole Saw -: Under normal conditions, this tool will last longer than other hole punching tools..
  • ⭐Stainless Steel Hole Saw--: Under normal conditions, this tool will last longer than other hole punching tools..
Check Stock

uxcell 10Pcs Carbon Brushes,for Electric Motor,10mmx5mmx5mm,Power Tool,Replacement Repair Part

  • Carbon Brush Size (Approx.): 10 x 5 x 5mm / 0.39" x 0.2" x 0.2" (L*W*H).
  • Package Content: 10 x Motor Carbon Brushes.
  • Carbon motor brushes are one of the most commonly replaced power tool components..
  • Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor and restore a motor’s electric braking..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and ..
Check Stock

Drilax 2 3/4 inch Diamond Drill Bit Hole Saw Ceramic Porcelain Tiles Glass Granite Quartz 2.75 2-3/4 Single Pack

  • DIAMOND TIPPED HOLE SAW DRILL BIT 2-3/4 inch for drain holes, quartz, shower, faucet, kitchen and bathroom upgrades..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • DRILL HOLES in glass, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • Tile installation, tiling made easy for Diamond Hole Saw Tools. Shank size is 3/8" - suitable for all standard cordless or drills..
Check Stock

VPABES Portable Reciprocating Saw Adapter, Ergonomic Handle with Extra 3 Reciprocating Saw Blades, Electric Drill Tools Attachment Fit for Wood Metal Cutting

  • ★Function: This portable reciprocating saw kit changed general electric drill into a reciprocating saw..
  • ★Ergonomic Design & Comfort Use: An ergonomic handle give a secure and comfortable grip for confident and effective operation..
  • ★Application: Safety of sawing, effectively improve the efficiency of your work. Fit for wood, metal cutting..
  • ★What You Get: 1 x Portable Reciprocating Saw Adapter.
  • 3 x Reciprocating Saw Blades (This product does not include electric drill.).
  • ★Service Guarantee: US overseas warehouse delivery, can be delivered in the shortest time, if you have any questions about the product, please contact us, we will deal with you with in 24 hours.
Check Stock