Categories

Best Suspension Tool

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

KUNTEC Torsion Bar Unloading Tool Heavy Duty Torsion Key Tool with C Frame Compatible for GMC Chevy Ford Dodge Car Truck Auto

  • FUNCTION: Torsion bar removal tool helps you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • EASY TO USE: Features larger 7/8” diameter anvil casting threads, this Torsion Bar Unloading Tool will make quick and easy work of your suspension job.
  • COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more.
  • QUALITY: This torsion bar tool is built with heavy-duty forged steel, made for use on trucks with heavy duty chassis and a larger torsion bar.
  • ATTENTION: This torsion bar unloading tool can only be used with hand wrench, do not use the impact driver. Grease the threads before using and get the front tires completely off the ground.
Check Stock

Cane Creek Thudbuster ST G4 Bike Suspension Seatpost 27.2 (Newest Version) Aluminum Alloy Adjustable Shock Absorber for Road & Gravel Bicycles

  • ✅ COMFORTABLE SUSPENSION SEATPOST: Bicycle seatpost with 50mm of Travel (1.97in) for exceptional shock absorbing while cycling..
  • ✅ REDUCE RIDING PAIN & INCREASE COMFORT: Absorb bumps, dips, and drops with the Thudbuster suspension seatpost. This will soften your ride and make biking more comfortable and enjoyable so you can ride longer..
  • ✅ HIGH QUALITY & DURABLE: This suspension seatpost is completely redesigned from the previous model for increased durability and additional suspension travel..
  • ✅ NO SHOP TOOLS NEEDED: Tool-free elastomer change and a single-bolt seat clamp design for easy seatpost adjustments..
  • ✅ WORKS WITH MANY DIFFERENT BIKE TYPES: This bike suspension seatpost can be used on road bikes, gravel bikes, e-bikes (electric), commuter bikes, and adventure bikes for maximum comfort and performance..
Check Stock

SIM TOOLS LCAT6803 Lower Control Arm Tool

  • The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing..
  • After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support..
  • The joint wedges again in the cone after it was pressed down only briefly with a tyre lever.
  • The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away..
  • With this lever tool the work can be accomplished safely and comfortably by one person (no mauling on your own making it safe and simple to use)..
Check Stock

American Bench Craft Riveted Leather Multi Tool Case fits Gerber Suspension, Gerber Suspension NXT, Gerber Truss and Gerber Bear Grylls Ultimate Multi-Tool - Leather Sheath (Tan)

  • This Multi Tool Case was designed to fit the Gerber SUSPENSION, SUSPENSION NXT, TRUSS and BEAR GRYLLS Multi Tools Only. Not for any other products. This case is Union made in the USA by a Veteran-owned company. Thank you for your support..
  • PLEASE see description below for additional SIZING details and WATCH video for proper fitting! If you feel as though you received an incorrect fitted case, please make sure you ordered the correct case for the Multi Tool you have, then contact us..
  • As with any PREMIUM leather good, your Multi Tool Case will be stiff and rigid at first.
  • Our Leather is thick for durability. If you prefer, supple, thinner leather, please don't buy..
  • Your Gerber Multi Tool may fit snug at first. Please allow time for case AND belt loop to break in..
Check Stock

Glorider Torsion Bar Unloading Tool Heavy Duty Drop Forged Torsion Key Tool Removal Compatible for GM GMC Chevy Ford Dodge Car Truck Auto

  • 【User-Easy】The Torsion Bar Unloading Tool effortlessly adjust Torsion Key. Keep your suspension system running smoothly by adjust the Torsion Key..
  • 【Universal Tool】Fits Most American domestic and imported cars(GM-C Chev-y For-d Dodg-e OLDSMOBIL-E Cadilla-c Humme-r) for install the Torsion Key.DOES NOT FIT 2011+ Chev-y / GM-C 2500 / 3500 models, Does NOT fit the 2011+ HD models..
  • 【Professional】Heavy-duty forged steel with Well Powder Coated, Rust-Resisting.
  • Heat Treated C Clamp Puller, High Quality Material, Not Easy to Bent.
  • 【Tips】Hand wrench is recommended while installation. For proper function and prevent tool damage, please clean and lubricate the entire length of the threaded screw prior to each use, including the tip.This Torsion Bar Unloading Tool is a must have for anyone doing suspension work..
  • 【Protection】We offer"30-day free returns 12 months warranty,"service.If you have any questions, you can ask us. We will reply within 24 hours.If you need to install the video, you can ask us at any time..
Check Stock

8629 Wheel Hub Removal Tool & 6007 Lower Control Arm Prying Tool & Brake Caliper Hooks

  • The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing..
  • After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support..
  • The joint wedges again in the cone after it was pressed down only briefly with a tyre lever.
  • The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away..
  • With this lever tool the work can be accomplished safely and comfortably by one person (no mauling on your own making it safe and simple to use)..
Check Stock

OMT Torsion Bar Unloading Tool, Heavy Duty Torsion Key Tool with C Frame and 0.9" Dia Threaded Rod, Torsion Bar Tool Compatible with Chevy Silverado GMC Dodge Cadillac More

  • TORSION BAR REMOVER: Orion Motor Tech's torsion bar removal tool is the ideal assistant to help you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • WIDE COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more (see all compatible models below).
  • EFFICIENT TOOL: Our torsion bar removal tool consists of a C frame with a 6.3 inch (16 cm) opening that easily holds the torsion bar in place and a 7.1 inch long, 0.9 inch (22 mm) diameter threaded shaft that makes quick and easy work of your suspension jobs.
  • DURABLE CONSTRUCTION: This car tool is constructed from high quality AISI 1045 medium carbon steel.
  • the hammered finish offers incredible durability and corrosion proof experience to let you enjoy years of dependable use.
  • and the 1 inch hex drive bolt offers compatibility with your standard hand wrench.
Check Stock

Orion Motor Tech Torsion Bar Unloading Tool, Heavy Duty Torsion Key Tool with C Frame and 0.9" Dia Threaded Rod, Torsion Bar Tool Compatible with Chevy Silverado GMC Dodge Cadillac More

  • TORSION BAR REMOVER: Orion Motor Tech's torsion bar removal tool is the ideal assistant to help you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • WIDE COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more (see all compatible models below).
  • EFFICIENT TOOL: Our torsion bar removal tool consists of a C frame with a 6.3 inch (16 cm) opening that easily holds the torsion bar in place and a 7.1 inch long, 0.9 inch (22 mm) diameter threaded shaft that makes quick and easy work of your suspension jobs.
  • DURABLE CONSTRUCTION: This car tool is constructed from high quality AISI 1045 medium carbon steel.
  • the hammered finish offers incredible durability and corrosion proof experience to let you enjoy years of dependable use.
  • and the 1 inch hex drive bolt offers compatibility with your standard hand wrench.
Check Stock

Fox Shox Cartridge Rebuild Kit, 32, 34, 36, 40mm Grip

  • Used to pressurize the (IFP) Internal Floating Piston in rear shocks after service..
  • Tool designed for servicing RockShox rear shock suspension..
  • Works with Monarch and Vivid models for charging IFP..
  • Adapter tool measures 17.9 x 13.4 x 10.4 inches, .48 ounces and includes O-ring..
  • Essential mechanic tool to properly service and maintain all RockShox products..
Check Stock

Suspension Strut Spreader Socket Tool Strut Knuckles Remover Shock Absorber Ram Dismantle Socket Compatible with Audi VW, compatible with Ford, compatible with BMW, compatible with Citroen (Pack of 2)

  • Must Have Tool for Remove Strut : It is quick and easy to remove and replace the strut unit in the front axle use this socket, when replaced the struts or shocks. and very easy to knock it out of the spread position, makes removal suspension strut much easier.
  • Easy To Use: With this spreader, it slides easily into place and effortlessly holds the knuckle apart so you can remove the old strut and pop the new one right in immediately without any struggle. use 1/2" ratchet connect spreader socket.
  • Not Damage Axle: No need to ever again sledge hammer away at the knuckle if you have this tool, eliminating any potential damage to the steering knuckle.
  • Fit Many Automotive: Include 5*8mm, 4.5*6.5mm different size two spreader socket , so this kit fit many car, fit VW Golf IV, compatible with Audi, compatible with Ford, compatible with BMW, compatible with Citroen, compatible with SKODA, Seat, Renault, Peugeot etc.
  • Durable: This suspension strut spreader socket made of high quality steel, high hardness and very strong, and we offer lifetime warranty, we will replace or refund, if our suspension strut socket have any quality problem.
Check Stock

Bac-kitchen 4 Pcs Brake Caliper Hangers Brake Caliper Hooks with Rubber Tips Automotive Tool for Braking Bearing Axle and Suspension Work

  • Perfect brake tool for caliper work: Our brake caliper hook is the perfect tool to hold brake calipers out of the way, reducing the possibility of damage to calipers, brake hoses and other parts.Use of dedicated repair tool makes the automotive work quicker and save your time for added productivity..
  • Durable and safe: our brake caliper hangers are made of durable steel, with sturdy construction, not easy to break, can withstand a weight rating of approximately 100 pounds, safe and durable for you to use. 4 per set, and 8 extra rubber tips..
  • With rubber tips: our brake caliper hangers are designed with rubber tips at both ends, which can help to prevent the scratching of your painted suspension components..
  • Easy to find: each brake caliper hanger is powder coated in blue, bright color is easy for you to find when you need them, and never worry about misplacing these brake caliper hooks or forgetting them on a car again..
  • Useful for an array of automotive work: Brake caliper hangers / caliper hooks are perfect for a variety of automotive work, including tasks related to brakes, wheel bearings, axle shafts and suspension servicing..
Check Stock

bimiti Rear Suspension Control Arm Trailing Arm Bushing Tool Removal Tool Kit for Ford Focus Mazda Volvo Bushing Press Kit

  • 【Application】This rear suspension bushing removal tool has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, suitable for Mazda 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012..
  • 【Performance】This rear suspension bushing kit has excellent performance, protects your car from scratches, no marks or scratches, and is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to use】Designed for the removal and installation of bushes and bearings, this rear trailing arm bushing tool is easy to use and install without the need to remove the rear axle, saving a lot of time..
  • 【Material】This control arm bushing removal tool is made of selected carbon steel. The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】This rear control arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we wil....
Check Stock