Categories

Best Swiss Bearing Lubricant

ARCTIC P12 (5 Pack) - 120 mm Case Fan, Pressure-optimised, Quiet Motor, Computer, Fan Speed: 1800 RPM - Black

  • OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P12 is particularly suitable for use on heatsinks and radiators.
  • HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved.
  • INNOVATIVE DESIGN: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level.
  • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
  • TECHNICAL DATA: Fan speed: 1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 3-pin.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 100-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 2-3/4\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 200-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 2\ Bore, 5-1/8\ Bolt Hole Spacing, 9800lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 108-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Senston Ceramic Skateboard Bearings High Speed Double Shielded 608 RS ABEC-11 8 Pack Set for Skateboard Trucks Scooters Wheel Roller Skate

  • What you get: 8 pcs 608-2RS ceramic ball bearing in a steel box.Made of high quality carbon steel with long durability with heavy load and strong resistance for daily use impacts..
  • Standard solid bearing: All size in standard 22*8*7mm, black chrome shell never fray or stain. Pre-lubricant ceramic ball can run more smooth and longer than ordinary steel ball bearings. Nylon ball base can suffer more bump or fall..
  • Smart design for strong bearing: Double rubber shield cover in bronze, resist outside impact, prevent dust or sand and stone from breaking into bearing, damage ball inside. ABEC-11 certification made it better than any other competitors you ever seen..
  • Widely use: Not only this set of ceramic 608 2RS bearing for skateboard, it can apply widely on sports like kick scooter, roller skate and so on, but also on your life: spinner, baby stroller, hand cart, truck dolly. It’s your best option when you want to have some 608 bearings..
  • Reminder: The bearings is made with slight lubricant oil, change bearings with gloves to prevent moist from your hand for better performance..
Check Stock

SKF F4B 108-FM Ball Bearing Flange Unit, 4 Bolts, Eccentric Collar, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing Width, 5310lbf Dynamic Load Capacity

  • Cast iron flanged housing for vibration damping and structural rigidity.
  • Double-sealed, deep-groove ball bearing insert with an extended inner ring for applications with radial, thrust, and combined loads.
  • Acrylonitrile-butadiene rubber (NBR) contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Eccentric locking collar for securing the bearing onto the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 104-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/4\ Bore, 3-5/8\ Bolt Hole Spacing, 5730lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 103-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-3/16\ Bore, 3-1/4\ Bolt Hole Spacing, 4380lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 204-TF Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Seals with Flingers, Cast Iron, 2-1/4\ Bore, 5-5/8\ Bolt Hole Spacing, 11840lbf Dynamic Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4BM 300-TF Ball Bearing Flange Unit, 4 Bolts, Medium Duty, Set Screw Locking, Seals with Flingers, Cast Iron, 3\ Bore, 6\ Bolt Hole Spacing, 16360lbf Dynamic Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Fireball Dragon Skateboard Bearings 8 Pack - Fast 608 Longboard Bearings Set fits Skateboards Inline & Roller Skates - Precision Made & Guaranteed for Life Race

  • RACE PRE-LUBED FOR FAST SMOOTH SKATING - Ultra smooth and long lasting performance with our signature skate lubricant formula. These bearings are....
  • ULTRA SMOOTH - Unlike competitors, Dragons are made from high grade steel, w/ Nylon ball bearing cage (reduced friction & a fluid roll) & 2 Rubber....
  • INCREASE PERFORMANCE - w/ our signature Dual-Labyrinth Shields, designed to keep dirt/debris out & maximum lubricant retention. This helps improve....
  • 8 x 608 BEARING SKATE RATED BEARINGS manufactured to +/- 0.008mm. 1 Set fits 4 wheels. Order 2 sets for inline roller skate use. Specs - 22mm (outer....
  • LIFETIME BEAST GUARANTEE - for peace of mind against manufacturing defects for the life of your skateboard bearing. The perfect worry-free upgrade to....
Check Stock

ARCTIC F14 Silent - 140 mm Case Fan, Ultra-Quiet, Extra Quiet Motor, Computer, Almost inaudible, Fan Speed: 800 RPM - Black/White

  • GREATER EFFICIENCY - LESS NOISE AT HIGHER AIRFLOW: At low fan speed, the motor noise is key, a motor developed in Germany with a new alloy/lubricant combination reduced friction and noise.
  • INNOVATIVE DESIGN: Design of fan blades improves air flow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
  • TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case.
  • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
  • TECHNICAL DATA: Fan speed: 800 RPM, Airflow: 46 CFM/78 m³/h (@ 800 RPM), Noise Level: 0.08 Sone (@ 800 RPM), Pin: 3-pin.
Check Stock