Categories

Best Switch With 10g Uplink

Reidubo 6 Port Ethernet PoE Switch with 4-Port PoE, 2 Uplink Port, 100Mbps, 75W, Unmanaged, Plug and Play, Extend & VLAN(Compatible with TP-Link &Ubiquiti Access Point-AP WIFI6)

  • 【2*Uplink Port & 75W】The Reidubo PoE Switch with 2*10/100Mbps uplink ports and 4*10/100Mbps POE ports can transmit data and power at the same time.Reidubo network switch offers whole 75W PoE power output but maximum power for each port is 30W.2*uplink port can connect to NVR, other switches, routers, etc.A wide range of connection options to meet your diverse Internet needs..
  • 【Built-in Power Supply & 4KV Lightning protection】Reidubo 6-port PoE switch built in power supply (75W).power adapter no more needed,which makes the PoE Switch simpler and lighter. Ideal for PoE IP Camera, Access Point, IP Phone and other PD devices..4KV lightning protection design allows your products and equipment to operate stably even in bad weather. Supporting IEEE802.3af/at PoE Protocol, with per port output power of 15.4W/30W..
  • 【Unmanaged Plug and Play &Multiple installation options】Reidubo PoE Switch support automatically detect devices, just plug in the power cord and network cable.Easy setup with no software installation or configuration needed.Supports desktop, wall or rack placement.It can be installed in office, home, and commercial locations, it is the good choice for high bandwidth requirements.
  • 【Intelligent PD Detection& QoS function】The PoE switch w....
Check Stock

TRENDnet 5-Port 10G Switch, 5 x 10G RJ-45 Ports, 100Gbps Switching Capacity, Supports 2.5G and 5G-Base-T Connections, Lifetime Protection, Black, TEG-S750

  • DEVICE INTERFACE: 5 x 10G RJ-45 Ports (100Mbps/1Gbps/2.5Gbps/5Gbps/10Gbps).
  • 10G PORTS: This 5-Port 10G switch provides a cost-effective solution in adding 10G link capability with five 10G ports for high-speed connections over Cat6a cabling (or better)..
  • MULTI-GIGABIT SUPPORT: This versatile unmanaged 10G switch also supports 2.5G/5G-BASE-T connections for faster speeds over your existing Cat5e cabling (or better)..
  • SWITCHING CAPACITY: The 10G switch has a 100Gbps switching capacity..
  • TRENDNET LIFETIME PROTECTION: The TEG-S750 switch comes with Lifetime TRENDnet protection..
  • FANLESS DESIGN: Fanless design lowers energy consumption and eliminates noise for silent operation..
  • Supports IEEE 802.3bz 2.5G/5G-BASE-T over cat5e cabling (or better)..
  • Supports IEEE 802.3an 10G-BASE-T over cat6a cabling (or better)..
Check Stock

EnGenius Cloud Multi-Gigabit ECS2512 8-Port 2.5G with 4 10G SFP+ Uplink Ports

  • 8 10/100/1000/2500 Base-T GbE Ports to serve high-bandwidth devices.
  • 120 Gbps Switching capacity for improved performance.
  • 4 Dual-Speed 10G SFP+ (fiber) uplink ports to connect at distance, speed & capacity.
  • 802.3ad Link Aggregation (LACP) Supports Traffic Load Balancing.
Check Stock

EnGenius Cloud 10 Gigabit ECS5512FP 8-Port PoE++ Switch with 420W Budget 4 SFP+ Uplink Ports

  • 8 100/1000/2500/5000/10000 Base-T GbE ports to serve high-bandwidth devices.
  • 802.3af/at/bt PoE++ capable on all ports with a 420W PoE budget for maximum power supply to devices.
  • 4 Dual-Speed 10G SFP+ (fiber) uplink ports to connect at long distances, high speeds & high capacity.
  • 240 Gbps switching capacity for improved performanc.
Check Stock

Engenius - Switch - 8 Ports - Managed - Desktop (EGS5212FP)

  • 8 Gigabit PoE+ Ports, IEEE802.3at/af support.
  • 2 Gigabit uplink Ports and 2 SFP Slots for additional connectivity.
  • Internal power supply with 130 w PoE budget.
  • IGMP and MLD snooping provides advanced multicast filtering.
  • 2 Gigabit uplink ports and 2 SFP slots for additional connectivity.
  • Internal Power Supply with 130 W PoE Budget.
  • A full-featured Layer 2 PoE+ Switch (Qu's, IGMP/MLD Snooping, STP/RSTP/MSTP, Link Aggregation Control Protocol (LACP), SNMP v1/v2c/v3, and more).
  • Easy to manage and configure via a Web-based Graphical User Interface (GUI).
  • Up to 24 Gbps non-blocking switching capacity.
Check Stock

EnGenius Cloud Multi-Gigabit ECS2512FP 2.5G 8-Port PoE++ Switch with 240W Budget, 4 SFP+ Uplink Ports

  • 8 10/100/1000/2500 Base-T GbE Ports to serve high-bandwidth devices.
  • 802.3af/at/bt PoE++ capable on all ports with a 240W PoE budget for maximum power supply to devices.
  • 120 Gbps Switching capacity for improved performance.
  • 4 Dual-Speed 10G SFP+ (fiber) uplink ports to connect at distance, speed & capacity.
Check Stock

MokerLink PoE Switch, 6 Port and 10 Port PoE Switch, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • 6 Port PoE Switch: 4 Port PoE+, 2 Port uplink, 100Mbps, 78W.
  • 10 Port PoE Switch: 8 Port PoE+ 100Mbps, 2 Port Gigabit Uplink, 120W.
  • Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock

MikroTik 12-Port 10G Switch with Dual Power Supply CRS312-4C+8XG-RM

  • CRS312-4C+8XG-RM Mikrotik first product with 10G RJ45 Ethernet ports. It has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection.
  • Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active.
  • CRS312-4C+8XG-RM switch is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on.
  • It has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks.
  • This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps.
Check Stock

TRENDnet 28-Port Web Smart Switch, 24 x Gigabit Ports, 4 x 10G SFP+ Slots, High Speed Network Uplinks, 128 Gbps Switching Capacity, Network Ethernet Switch, 1U Rack Mountable, Black, TEG-30284

  • ETHERNET PORT INTERFACE: 24 x Gigabit ports, 4 x 10G SFP+ SLots.
  • SWITCHING CAPACITY: This Ethernet switch allows for a 128Gbps switching capacity.
  • HIGH SPEED 10G SFP+: This gigabit switch offers four dedicated 10G SFP+ slots for high-speed network uplinks or downlink NAS / access server connections providing a cost-effective solution in adding 10G link capability to an SMB network..
  • WEB SMART MANAGEMENT: This 24 port network managed switch provides provides an easy to use web-based GUI management for reduced switch configuration complexity and offers a combination of more commonly used SMB management features for easy deployment..
  • INTEGRATION FLEXIBILITY: Managed features for this 24 port switch include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap and syslog for monitoring and flexible network integration..
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Warranty..
Check Stock

TRENDnet 8-Port 10G Switch, 8 x 10G RJ-45 Ports, 160Gbps Switching Capacity Rack mountable, 10 Gigabit Network Connections, Lifetime Protection, Black, TEG-S708

  • DEVICE INTERFACE: 8 x 10GBASE-T Ports (100Mbps/1Gbps/2.5Gbps/5Gbps/10G).
  • 10 GIGABIT PORTS: This 8-port 10G switch offers eight 10G ports with 160Gbps switching capacity for high-speed network connections providing a cost-effective solution in adding 10G link capability..
  • 2.5/5G SUPPORT: The network switch supports 2.5G/5GBASE-T RJ-45 multi-gigabit speeds capable of up to 2.5Gbps or 5Gbps over existing Cat5e or better cabling..
  • DATA TRANSFER RATE: Ethernet: 10 Mbps (half duplex).
  • RACK MOUNTABLE DESIGN: The sturdy metal 10G Ethernet Switch has a rack mountable design for greater installation flexibility..
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • 【11port poe switch@150W 】PoE switch with 8 100M port PoE + 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechani....
Check Stock

MokerLink Gigabit POE Switch, 5 Port and 8 Port PoE Switch, IEEE802.3af/at, Unmanaged Plug and Play, Sturdy Metal Fanless

  • 5 Port Gigabit PoE Switch: 4 Gigabit POE ports, 1 Gigabit Uplink Ports, 1000Mbps, 78W.
  • 8 Port Gigabit PoE Switch: 8 Gigabit POE ports, 1000Mbps, everyport can be uplink,120W.
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, without configuration..
  • Fanless design, always working silently. With mounting ears and screws for wall mounting, suitable for multiple installation environments..
  • Widely Used: Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Home and Office Networks, etc. 100% Satisfaction - 30-day Money-Back and Lifetime Tech Support..
Check Stock

TRENDnet 6-Port 10G Switch 4 x 2.5G RJ-45 BASE-T Ports 2 x 10G RJ-45 Ports 60Gbps Switching Capacity Wall Mountable 10 Gigabit Network Connections Lifetime Protection Black TEG-S762

  • 10G PORTS: This 6-Port 10G switch offers two 10G ports for high-speed network connections providing a cost-effective solution in adding 10G link capability..
  • 2.5G PORTS: Equipped with four 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling..
  • SWITCHING CAPACITY: The 10G switch has a 60Gbps switching capacity..
  • WALL MOUNTABLE: Well-suited for desktop installations, but also features convenient wall mountable design for greater installation flexibility..
Check Stock