Categories

Best Swivel Air Fittings

WYNNsky 25 Feet Polyurethane Coiled Air Compressor Hose 1/4 Inch MNPT Brass Swivel Air Fittings with Bend Restrictor

  • Air Hose Standard: 1/4 inch inner diameter is more suited to less powerful tasks, like inflating a tire or clean your garage.
  • Durable: Polyurethane material provides extreme flexibility without the hassle of twisting and kinking during use, or when stored. Polyurethane’s....
  • Light Weight: polyurethane air hose is considered an “all-around” option. It weighs less than comparable hybrid and PVC options, which is a factor....
  • All Weather Use: If you’ll be working outside, on the move and in the elements, polyurethane hoses will make your job a lot easier, polyurethane....
  • Brass Swivel Air Fittings: Accepts all types of 1/4 inch FNPT quick change and quick release air fittings, clear threads provide a tight,....
Check Stock

Plews/Edelmann Amflo 4-12 Lightweight 1/4\ x 12' Nylon Recoil Air Hose Stores Itself When The Job is Done - Ideal for Home, Shop, and Industrial Use, Yellow

  • Amflo's 12' yellow nylon recoil air hose is ideal for home, shop, and industrial use where the tool is close to the air supply like industrial workstations and home workbenches.
  • Oil and chemical resistant hose retains it's self-coiling properties over time and stores itself when finished - keeping the hose out of the way when not needed.
  • 200 PSI working pressure has the capacity for all kinds of pneumatic tools - brad nailers, staplers, rotary tools, blow guns, spray guns, and more.
  • Swivel end fittings reduce hose twist while bend restrictors extend hose life by reducing opportunities for 'pull' damage on the hose ends.
  • Features: 1/4 inch NPT swivel fittings to reduce twisting, rugged steel coil bend restrictors, 200 PSI working/800 PSI burst pressure, +32 to +120 temperature range.
Check Stock

Hromee Air Compressor Hose 3/8-Inch x 50 Feet Hybrid Hose with Fittings, 1/4”NPT Swivel Universal Coupler and Plug Kit

  • ... delivers 300-PSI for maximum working pressure..
  • HYBRID HOSE - The hose is constructed with hybrid which is blended rubber and PVC so it is lighter and less bulky than traditional solid rubber hose, more flexible and avoid binding, kinking, and tangling. Long using life is achieved in Hromee hybrid hoses..
  • SWIVEL END FITTINGS - One 360 degrees ball swivel end is equipped in the hoses. 1/4” FNPT brass swivel connectors never corrode, and seal better than aluminum, steel, or zinc. It is designed for avoid hose twisting that improves the reliability needed to get the best out of your air compressor and air tools..
  • COUPLER & PLUG KIT - Despite a swivel end, our engineers equipped with one 1/4'' NPT universal coupler which fits Industrial (I/M), ARO (A) and Automotive (T) and one I/M style plugs for connecting air compressor and air tools basically. The bend restrictors in the end of hose is for preventing kinking..
  • RANGE OF APPLICATION - Suitable for industrial, contractor, or household use. It is ideal for connecting supply lines,compressors, hose reels. With high visibility color yellow, you can quickly find your hose easily on a busy job site - then attach tools to the air supply..
Check Stock

FYPower 22 Pieces Air Compressor Accessories kit, 1/4 inch x 25 ft Recoil Poly Air Compressor Hose Kit, 1/4\ NPT Quick Connect Air Fittings, Tire Inflator Gauge, Blow Gun, Swivel Plugs

  • ➤ Advanced Air Compressor Tool Kit – This 22-piece compressor accessory set includes a long 25ft recoil poly air hose, tire inflator gauge, heavy duty blow gun nozzles, 360° swivel connector, swivel plugs, couplers, inflation needles, and more..
  • ➤ Heavy Duty Craftsmanship – Designed for personal or professional-grade mechanic use, our fittings, connectors, plugs, and tools are crafted with premium brass, recoil poly, and corrosion-resistant steel, respectively..
  • ➤ Flexible, Lightweight Hybrid Air Hose – Offering more control and versatility over a standard air compressor hose, our 1/4” x 25ft recoil poly hose with ¼” FNPT and MNPT couplers offers 120 PSI of stable pressure..
  • ➤ Universal Accessories and Attachments – We’ve also provided all the small details to suit your air compressor needs, including tire inflator gauge, 360° swivel connector, swivel plugs, heavy duty blow gun with safety and tapered nozzles, rubber tip, couplings & plugs, and PTFE tape..
  • ➤ Trusted 1-Year Warranty – Here at FYPower we pride ourselves on creating the highest-quality tools and accessories possible, which is why we back every order by responsive customer service and a 1-year manufacturer’s warranty..
Check Stock

FYPower 22 Pieces Air Compressor Accessories kit, 3/8 inch x 50 ft Hybrid Air Compressor Hose Kit, 1/4\ NPT Quick Connect Air Fittings, Tire Inflator Gauge, Heavy Duty Blow Gun, Swivel Plugs

  • ➤ Advanced Air Compressor Tool Kit – This 22-piece compressor accessory set includes a long 50ft hybrid air hose, tire inflator gauge, heavy duty blow gun nozzles, 360° swivel connector, swivel plugs, couplers, inflation needles, and more..
  • ➤ Heavy Duty Craftsmanship – Designed for personal or professional-grade mechanic use, our fittings, connectors, plugs, and tools are crafted with premium brass, rubber PVC, and corrosion-resistant steel, respectively..
  • ➤ Flexible, Lightweight Hybrid Air Hose – Offering more control and versatility over a standard air compressor hose, our 3/8” x 50ft hybrid hose with ¼” FNPT and MNPT couplers offers 300 PSI of stable pressure..
  • ➤ Universal Accessories and Attachments – We’ve also provided all the small details to suit your air compressor needs, including tire inflator gauge, 360° swivel connector, swivel plugs, heavy duty blow gun with safety and tapered nozzles, rubber tip, couplings & plugs, and PTFE tape..
  • ➤ Trusted 1-Year Warranty – Here at FYPower we pride ourselves on creating the highest-quality tools and accessories possible, which is why we back every order by responsive customer service and a 1-year manufacturer’s warranty..
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

ABN 1/4in NPT 360 Degree Swivel Connector with Adjustable Tension Control to Stop Leaks – For Any Air Tool

  • Convenient: This ABN 1/4" Inch NPT 360 Degree Swivel Connector accepts NPT threads, 1/4-inch fittings and quick connect adapters.
  • 360-Degree Swivel: Increases maneuverability, reduces hose stress and kinks, extends hose life, and reduces operator fatigue.
  • Non-Restrictive: This connector offers an obstruction-free flow.
  • Adjustable: A screw on the end of the unit adjusts the tension and stops/prevents leaks.
  • For Any Air Tool Application: Perfect for use on any compressed air line.
Check Stock

JACO Lightning Tire Air Chuck Kit (Set of 7) | Open Flow, 1/4\ F-NPT

  • ...ement - no more fighting the valve stem, no more air loss..
  • LIGHTNING FAST - our all-new quick-release valve that lets you rapidly disconnect the air chucks from the tire valve stem with absolutely zero air loss - completely eliminating any margin for error when precision matters most..
  • OPEN FLOW - laser-cut threaded fittings (1/4 inch F-NPT) for compatibility w/ tire inflators & gauges to control flow from air compressor w/ precision for tire inflation (not recommended to attach directly to air compressor hose)..
  • EASY TO USE - built tough from high-density aluminum alloy, so they will never rust, fail, or fall apart like traditional chucks. Feature various exclusive features such as 360 swivel points to eliminate frustrating air hose tension. Pack includes air fittings for all types of valves stems (dually, vehicle, presta, etc)..
  • BUILT TO LAST - engineered by the experts at JACO w/ over 35 years of experience in the industry, and proudly backed by our 100% Lifetime Warranty. Experience firsthand the most revolutionary advancements to air chucks ever made with our exclusive Lightning Technology..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

WYNNsky 1/4\ NPT 360 Degree Swivel Air Hose Connector, 1/4 Inch Industrial Swivel Air Fittings

  • Improved the flexibility between hose and air tool..
  • Swivel helps air lines from getting tangled and twisted..
  • 1/4" basic body size with Max working pressure of 300PSI..
  • Accepts both standard threaded fittings and quick change adapters..
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

YOTOO Heavy Duty Air Compressor Accessories Kit 20 Pieces with 1/4 inch x 25 feet Polyurethane Air Compressor Hose, 100 PSI Tire Inflator Gauge, Air Blow Gun and Air Hose Fittings

  • GREAT AIR COMPRESSOR KIT with all you need to start your projects. ONE YEAR WARRANTY. If any problems, Please feel free to contact us at any time..
  • TIRE INFLATOR WITH GAUGE FOR INFLATING CAR TIRES AND PRESTA VALVE BICYCLES: Air inflation gun, air chuck, and tire gauge are all combined in one easy to use unit.
  • Rugged die cast aluminum construction with chrome plate finish that is corrosion-resistant.
  • 1/4"X25' POLYURETHANE AIR HOSE FOR CONNECT AIR COMPRESSOR AND AIR TOOLS: Polyurethane material make this air hose durable and reliable. 1/4" x 25 foot length provides flexibility and freedom of movement while tackling projects. Swivel solid brass and fittings reduce hose twist and bend restrictors reduce kinking and help to increase the life of the hose. Max working pressure:150PSI.
  • 6-PIECE STANDARD BLOW GUN AND NOZZLES FOR CLEANING JOBS AND INFLATING POOLS AND SPORT BALLS: Standard Blow gun with (3) inflation nozzles and (2) inflation needles for pool toys, sports balls and air mattresses.
  • 11-PIECE HEAVY DUTY 1/4" INDUSTRIAL STEEL AIR HOSE FITTINGS: Quick Couplers and plugs are made of hardened steel plated to resist rust and long time use. Recommended use with thread seal tape(Included).
Check Stock