Best Swivel Straight Fittings
8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)
- 【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
- 【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
- 【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
- 【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
- 【Warranty】Three months limited warranty & Free lifetime technical support..
Check StockKeg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece
- ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
- USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
- Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
- BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
- Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
- INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
- Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
- To install fittings, pull up lever on ball lock disconn....
Check StockFuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal
- 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
- Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
- Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
- The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
- Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
- No Worry To Buy: Excellently Sealed, no leaking. We of....
Check StockHUMMUH Outdoor Swivel Rocker Wicker Patio Chairs Set of 2, Rattan Rocking Chair Furniture Set(Brown,Beige)
- HIGH QUALITY: Using only the best quality fittings and fixtures designed to last including durable wicker and Extra Thick 5" Polyester Fabric cushion (water and fade resistant, eco-friendly)..
- ROCKING AND 360 DEGREE SWIVEL: Relax and enjoy sitting on your front or back porch in ultimate comfort with rocking/ glider feature allowing for backward and forwards motion while also being able to swivel 360 degree to change direction..
- EASY TO ASSEMBLE: Using clearly written, easy to follow step by step instruction manual. This model of patio swivel chairs has been designed to be much easier to put together so you don’t spend hours trying to work out what to do..
- MODERN AND STYLISH: Enhance the look and feel of your balcony or deck. These stylish patio swivel chairs feature neutral tones of dark brown and grey to compliment all existing furniture, home or outside colors..
- WHY CHOOSE US?: We have strict quality control procedures in place, however should there be anything missing or damaged in transit we have a US based spare parts warehouse that can send you a replacement part straight away. Please contact us directly if you have any issues. We also provide a 12 month warranty on manufacturers defects of the product within 12 months of purchase..
Check StockEVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS
- 6AN female swivel to 3/8 barb fitting 45 Degree.
- Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
- Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
- Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
- EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check StockHUMMUH Outdoor Swivel Rocker Wicker Patio Chairs Set of 2, Rattan Rocking Chair Furniture Set(Brown,Grey)
- ...hairs feature neutral tones of dark brown and beige to compliment all existing furniture, home or outside colors.
- IMPORTANT: We have strict quality control procedures in place, however should there be anything missing or damaged in transit we have a US based spare parts warehouse that can send you a replacement part straight away. Please contact us directly if you have any issues. We also provide a 12 month warranty on manufacturers defects of the product within 12 months of purchase. Please note – Decorative pillows are not included with purchase..
Check StockEVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black
- The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
- 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
- These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
- Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
- EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check StockMcKillans Short Pressure Washer Gun with Swivel - High Pressure Water Handle with 3/8" Male Plug and 1/4” Quick Connector Coupler - Power Washer Gun Compatible with Foam Cannon - Car Wash Foam Gun
- ✅ Swivel Design: Equipped with a swivel inlet that allows your hose to rotate freely during use, prevent annoying kinks and wrestling with your hose..
- ✅ Preinstalled Fittings: Our guns come with the fittings preinstalled with teflon tape and locktite. Saving you time and effort..
- ✅ Lightweight Pull Trigger: Hold the pressure washer gun for long durations without getting tired. The snub nose design makes it easy to maneuver with just one hand. The short gun design is very convenient for use with a foam cannon..
- ✅ Why Us: Our swivel is one of the smoothest in the market. Built with real stainless and brass fittings, unlike the competition. Preinstalled fittings ensuring durability and leak resistance..
- ✅ Made for Detailers: The McKillans Pressure Washer Gun is the perfect upgrade for your power washer. The integrated swivel helps save you time by keeping your hose tangle free. The small body design makes the gun easy to handle and maneuver. Stop using the long, leaky, and cheap stock gun that comes with your pressure washer, and upgrade to a quality gun. The small design ma....
Check StockLitKiwi Draft Beer Line with Connectors,Part of Kegerator Kit,5 Feet-Clear Vinyl Tubing Hose 5/16'ID 7/16' with Stainless Steel Barb Fitting,for Beer Tap Tower Keg Homebrewing
- ★【Great Marterial】^^The Fitting—made of 304 High quality stainless steel with Swivel Nuts and Clamps which is durable and portable.^^The Tube—made of Food grade Vinyl Line,soft and smooth, durable and anti-kinking, safe and non-toxic..
- ★【General Size】^^The Fitting—Both are 5/16" barb and the threads both are 5/8" G.Fit for most of the draft beer accessories.^^The Tube—ID:5/16 inch,OD:7/16 inch,Length:5 feet or 10 feet,work with the barb fittings..
- ★【Wide Application】The tube and fittings kit are ideal for general use such as beer brewing, kegerator, wine making.Can be used with most commercial barbed fittings and connectors.The Beer line gives your beer a reliable connection from the back of your shank right to the keg coupler..
- ★【Easy & Efficient】This kit ensures a proper connection of your beer lines to your draft system. Installation is easy and can be done within minutes.And two worm clamps will guarantee no beer leaks..
- ★【Package Include】5' Length of clear 5/16”inside diameter beer line & 1pcs straight fitting & 2pcs clamps..
Check StockLitKiwi Draft Beer Line with Connectors,Part of Kegerator Kit,10 Feet-Clear Vinyl Tubing Hose 5/16'ID 7/16' with Stainless Steel Barb Fitting,for Beer Tap Tower Keg Homebrewing
- ★【Great Marterial】^^The Fitting—made of 304 High quality stainless steel with Swivel Nuts and Clamps which is durable and portable.^^The Tube—made of Food grade Vinyl Line,soft and smooth, durable and anti-kinking, safe and non-toxic..
- ★【General Size】^^The Fitting—Both are 5/16" barb and the threads both are 5/8" G.Fit for most of the draft beer accessories.^^The Tube—ID:5/16 inch,OD:7/16 inch,Length:5 feet or 10 feet,work with the barb fittings..
- ★【Wide Application】The tube and fittings kit are ideal for general use such as beer brewing, kegerator, wine making.Can be used with most commercial barbed fittings and connectors.The Beer line gives your beer a reliable connection from the back of your shank right to the keg coupler..
- ★【Easy & Efficient】This kit ensures a proper connection of your beer lines to your draft system. Installation is easy and can be done within minutes.And two worm clamps will guarantee no beer leaks..
- ★【Package Include】10' Length of clear 5/16”inside diameter beer line & 1pcs straight fitting & 2pcs clamps..
Check StockSpritech PCP Air Compressor,Auto-shutoff 4500Psi/30Mpa Oil/Water-Free Set-pressure Air Gun and Paintball Tank Pump with Water/Oil Separator,Built-in Power Adapter(110V AC or 12V Car Battery)
- ✅ Swivel Design: Equipped with a swivel inlet that allows your hose to rotate freely during use, prevent annoying kinks and wrestling with your hose..
- ✅ Preinstalled Fittings: Our guns come with the fittings preinstalled with teflon tape and locktite. Saving you time and effort..
- ✅ Lightweight Pull Trigger: Hold the pressure washer gun for long durations without getting tired. The snub nose design makes it easy to maneuver with just one hand. The short gun design is very convenient for use with a foam cannon..
- ✅ Why Us: Our swivel is one of the smoothest in the market. Built with real stainless and brass fittings, unlike the competition. Preinstalled fittings ensuring durability and leak resistance..
- ✅ Made for Detailers: The McKillans Pressure Washer Gun is the perfect upgrade for your power washer. The integrated swivel helps save you time by keeping your hose tangle free. The small body design makes the gun easy to handle and maneuver. Stop using the long, leaky, and cheap stock gun that comes with your pressure washer, and upgrade to a quality gun. The small design ma....
Check StockCamco 39855 RhinoEXTREME Compartment Hose - 2', Orange
- Perfect for Tight RV Sewer Compartments: Hose makes hookup easier in tight RV sewer compartments.
- Superior Abrasion-Resistant Exoskeleton: Hose has superior abrasion resistance due to its exoskeleton design.
- Improved Compression: Compress, bend or crush the hose and it will maintain its shape.
- Pre-Attached Swivel Fittings: Fittings swivel for easy connection.
Check StockHilitchi Hydraulic Zerk Grease Fittings Assortment Kit with Grease Zerk Caps (SAE-174PCS)
- ...ity Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable. The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating..
- 【✔】174Pcs Assortment kit SAE grease fittings. Sizes include: SAE standard, inch size,Straight 1/4”-28 (25pcs).
- We include 60pcs grease fittings caps can prevent the grease fittings from corrosion and contaminants..
- 【✔】GREAT USES: Our Straight & Angled Fittings are helpful to feed lubricant to your bearings and other mechanical devices without disassembly. Suitable for most automotive, motorcycle, truck, farm, and industrial applications..
- 【✔】NICE ASSORTMENT KIT: 174-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
- 【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We would solve all the problems to your satisfaction..
Check Stock