Categories

Best Swivel Tip Welding Clamps

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

MAXPOWER Heavy Duty Locking C-Clamp Set 6-Inch, 9-Inch,11-Inch, 3-Piece Locking Pliers Nickel Plated C Pliers With Regular Tip and Swivel Pads

  • WELDING GRIP CLAMPS – 6-inch C Locking Clamp with regular tips, 9-inch Locking C Plier w/ swivel pad and 11-inch Locking C Plier with regular tips.
  • LONG-TERM RELIABILITY – Made from nickel plated alloy steel to withstand corrosive working environment.
  • ADJUSTABLE LOCKING MECHANISM - Screw adjustable locks with trigger release.
  • SWIVEL PADS - Clamp wood joints and auto body panels while avoid damaging.
Check Stock

IRWIN VISE-GRIP Locking Pliers, Welding Clamp, 9-Inch (25ZR) (Pack of 4)

  • LOCKING C-CLAMP SET: A 3 piece set of imperial C-clamps with precision screw adjustable locks and trigger releases in the most convenient sizes you’ll ever need – 1 x 6” fixed pad, 1 x 6” swivel pad and 1 x 11” swivel pad..
  • COMMERCIAL GRADE CHROME VANADIUM STEEL: Our C-clamps are drop-forged from chrome vanadium steel with nickel plated finish to withstand long-term corrosion for real durability. That’s made to last the distance..
  • BUILT TO LAST: Whether you’re a professional mechanic or a handyman looking to complete your tool kit, you need a set of these premium quality C plier set in your kit. Work great as welding clamps too..
  • ROLL-UP POUCH: We’ve included a handy numbered nylon pouch for your clamp set. It rolls up for easy storage or transportation, and can also be hung up for quick access. A bright orange internal lining finishes off this sturdy clamp organizer for easy visibility..
  • SATISFACTION GUARANTEED: At Kendo tools we stand by the quality construction and durability of all our products. We are fully committed to customer satisfaction with a lifetime warranty against any manufacturer defects..
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

The Weekend Brewer Ball Lock Cornelius Keg Pigtails by

  • MUST HAVE for all cornelius keg owners. Allows for injecting CO2 in and dispensing beer out of standard ball lock kegs..
  • 5FT OF GAS TUBING allows for your CO2 tank to be placed in a convenient position. Competitor products make you compromise with only 3ft..
  • EASY CLEANING by removing the MFL disconnect and running water through the tubing. Most competitor products use barb disconnects with pex clamps which is extremely difficult to clean..
  • WORKS WITH ALL STANDARD REGULATORS. Includes swivel nut for mfl regulators. Remove swivel nut for barb regulators..
  • Upgrade your current regulator to our ultimate regulator that works with 5 types of CO2 tanks.
  • including paintball, sodastream, CO2 cartridges, and standard welding tanks. Search B071ZNP5BS to learn more..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

MAXPOWER 3PCS Water Pump Pliers and Locking C-clamp 11 inch 9 inch 6 inch

  • WELDING GRIP CLAMPS – 6-inch C Locking Clamp with regular tips, 9-inch Locking C Plier w/ swivel pad and 11-inch Locking C Plier with regular tips.
  • ADJUSTABLE LOCKING MECHANISM - Screw adjustable locks with trigger release.
  • SWIVEL PADS - Clamp wood joints and auto body panels while avoid damaging.
  • Plumbing Pliers Sizes and Opening Capatities: 1-3/16 inch (30mm) for 7-inch model, 1-1/2 inch (38mm) for 10-inch model, 3-3/4 inch (95mm) for 16-inch model.
  • Fast Adjustment Directly on the Work Piece, Just Position the Upper Jaw to the Work Piece , Push Button and Move Close the Lower Jaw.
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • ...RABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

The Weekend Brewer Ball Lock Cornelius Corny Keg Gas Line Assembly

  • MUST HAVE for all cornelius keg owners. Allows for CO2 injection of standard ball lock kegs. CM Becker Disconnect ensure a tight seal every time..
  • 5FT OF TUBING allows for your CO2 tank to be placed in a convenient position. Competitor products make you compromise with only 3ft..
  • WORKS WITH ALL STANDARD REGULATORS. Includes swivel nut for mfl regulators. Remove swivel nut for barb regulators..
  • EASY CLEANING by removing the CMB MFL disconnect and running water through the tubing. Most competitor products use barb disconnects with pex clamps which is extremely difficult to clean..
  • Upgrade your current regulator to our ultimate regulator that works with 5 types of CO2 tanks.
  • including paintball, sodastream, CO2 cartridges, and standard welding tanks. Search B071ZNP5BS to learn more..
Check Stock

Amazon Basics Adjustable Metal Face Clamp for Woodworking, Welding, Repairs - 11-Inch

  • Metal face clamp with a 3-inch-wide jaw reach.
  • securely clamps onto a variety of materials up to 2-3/4 inches thick.
  • Thumb screw knobs allow for quickly and easily adjusting the jaw capacity.
  • Swivel pads distribute clamping force evenly and protect surfaces from damage.
  • Ideal for pocket hole joinery, woodworking, welding, and other projects or repairs.
Check Stock

KEILEOHO 6 Pack 11 Inches C Clamp Locking Pliers with Swivel Pads Heavy-Duty Locking Pliers Woodworking Clamps Set Adjustable Nickel Plated C Pliers

  • 6 PCS VALUE PACK - This welding clamp tools set includes 6 heavy-duty C-clamps with sizes of 11 inches, all are made of high-quality nickel-plated alloy steel, which makes them durable and robust, and feature wide opening jaws for greater versatility in clamping a variety of shapes..
  • ADJUSTABLE & SWIVEL PADS - Our adjustable wood working locking pliers provide the versatility of standard locking pliers. Simply turn the screw to adjust the grip, which stays adjusted for repetitive use. Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface..
  • PREMIUM MATERIAL - Built with nickel plated alloy steel, these C-clamp locking pliers are designed to be the hardest working tools in your kit. With professional clamping force that won't slip along with forged and hardened alloy steel jaws, our C-clamp welding tools are durable and built to last..
  • TORQUE LOCK DESIGN - Anti-pinch ergonomically designed handles of the C-clamp locking pliers provides comfortable using experience. The contoured handle aids in the torque-lock design, resulting in a secure hold. The hardened wide jaws with better grip force on jobsite material, suitable for wood working, welding and more..
  • WORRY-FREE SHOPPING - Please do not hes....
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock