Categories

Best T slot Bolts

OLSON SAW CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks

  • ...vative feather board design that provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 2 each of 5/8" And 3/4" Metal miter bars, that fit all standard miter slots and four 1/4" T-track bolts.
  • Mounting hardware included for nearly any dual or tandem application - 3/4-inch and 5/8-inch wide miter bars and T-slot bolts fit most table and band saws, Router tables, and fences.
  • Includes sturdy spacer for tandem Feather Board operations.
  • Dual slide motion - Side to side and forward action for quick and easy setup.
  • Unique pre-load tension Design - quickly set tension for consistent cuts while reducing the chance of kick-back.
  • Split rail miter bar construction - provides maximum hold.
  • Mounting Hardware Included for nearly any dual or tandem application - 3/4-Inch and 5/8-Inch wide miter bars and t-slot bolts fit most table and band saws, router tables, and fences.
  • Includes sturdy spacer for tandem FeatherBoard operations.
  • Dual Slide Motion - Side to side and forward action for quick and easy setup.
  • Unique Pre-Load Tension Design - Quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

Bed Deck Rails Cleat T Slot Nuts Fits Screws with 3/8'-16 Thread 4PCS,Stainless 3/8-16 X 1 Hex Head Bolts 4PCS,Tie Down Anchors Rings Trailers Hook Cargo Bolt 4PCS for Toyota Tundra & Toyota Tacoma

  • 100% QUALITY MATERIAL:T Slot Nuts are made from 100% 304 Stainless Steel for the best corrosion resistance available,protect the T-Slot Nuts from rust. Tapped through for 3/8"-16 threads for use with d-rings, racks, tie downs, custom cleats and more.Hex Head Bolts are made from 304 Stainless Steel.tie down anchors are made of quality steel and they are fully welded triangular rings, which make the bolts sturdy and work for a very long time..
  • WIDELY USED:Mount extra custom cleats,tie downs,d-rings,bike racks and more! With a 3/8"-16 fully tapped and threaded hole, the possibilities are endless as to what you can attach.The tie down anchors are heavy duty 1000 lb rings,for securing ratchet rope, cam buckle straps, bungees cords,they are ideal to add tie down points for a truck, trailer ,SUV,boat to carry heavy loads, and let you far away from cargo swing and noise..
  • EFFECTIVELY:These T-slot nuts are perfectly compatible with bed rails in both Toyota Tundra (TM) and Toyota Tacoma (TM), but also work with a variety of other pickup trucks with compatible bed rails.By threading a screw or bolt through the 13/32" diameter bolting hole( (that's between 3/8" and 7/16")..
  • PACKAGE INCLUDES:T Slot Nuts with 3/8"-16 Thread 4 PCS,3/8-16 X 1" Hex Head Bolts 4PCS,Tie D....
Check Stock

POWERTEC 71223 Multi T-Tracks | 36 Long - 3 High | Universal T Track Aluminum Extrusion For Woodworking

  • Includes: (one) 36 inch multi-t-track for woodworking.
  • Universal: these T-slot tracks are spaced 3/4 apart, 3/4 thick and work with the major accessory fasteners - 1/4'' T-bolts | 1/4'' Hex bolts | 5/16'' T-bolts.
  • T-track customization: you can immediately use this multi-track with your flip stops, fence-brackets, hold downs, SUB fences and more (sold separately) or depending on your woodworking project, can be custom cut to suit your specific requirements.
  • Premium quality: featuring a solid construction, these extruded aluminum multi-tracks were engineered for high quality strength and durability.
  • Applications: once assembled, these aluminum extrusions can be used with table saws, band saws, routers and drill press tables Your choices are limitless..
Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

Rockler Retrofit Double Featherboard Kit

  • APPLICATION: Ideal for holding your workpiece in place (against the fence or table top) while cutting for router table and drill press applications, while safely keeping your fingers out of harms way from bits and blades.
  • PREMIUM DESIGN: Made with highly durable polymer, this featherboard set allows you to apply steady, heavy duty pressure for high precision cutting results while reducing kickback and problematic movement.
  • EASY TO INSTALL: 5-star threaded knobs and a standard 3/8” x ¾” miter gauge slot bracket allows you to set up your feather boards quickly and easily to any miter slot. Also includes 5/16”-18 t-bolts for t-slot or t-track applications.
  • VERSATILITY: For band saws, router tables and/or any woodworking machine with a standard 3/8” x ¾” miter gauge slot – double stacked and locked in both the horizontal and vertical position.
Check Stock

3 / 80 MM ROTARY MILLING TABLE WITH 80 MM ROUND VICE VISE & FIXING T-NUTS BOLTS -ENGINEERING TOOLS

  • 3"/ 80 MM ROTARY MILLING TABLE WITH 80 MM ROUND VICE VISE & FIXING T-NUTS BOLTS -ENGINEERING TOOLS.
  • WORM: GEAR RATIO - 1: 36, WHICH MEANS THAT 1 COMPLETE HANDLE ROTATION TURNS THE TABLE BY 10 DEGREE.
  • ROTARY BASE DIMENSIONS: 4-1/8" x 3-1/4" (4 x T-Slots: 5/16"). HORIZONTAL HEIGHT OF ASSEMBLY IS 75 MM (* REFER PICTURE). CAN BE MOUNTED HORIZONTALLY &....
  • COMES WITH 80 MM CASTE IRON QUALITY ROUND VICE/ VISE WITH FIXING NUTS BOLTS. PRECISELY GROUND. MOVING JAWS HAVE VERTICAL 7 HORIZONTAL VEE GROVE TO....
  • VICE IS DRILLED (M6) IN A MANNER THAT IT WILL FIT BOTH TO A 3 AS WELL AS 4 SLOT TABLE..
Check Stock

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots.
  • Dual Slide Motion-side to side and forward action for quick and easy setup.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.
  • Split rail miter bar construction-provides maximum hold.
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences.
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

POWERTEC 71553 Table Saw Fence Featherboard – 2 Pack

  • APPLICATION: Ideal for holding your workpiece in place (against the fence or table top) while cutting for router table and drill press applications, while safely keeping your fingers out of harms way from bits and blades.
  • PREMIUM DESIGN: Made with highly durable polymer, this featherboard set allows you to apply steady, heavy duty pressure for high precision cutting results while reducing kickback and problematic movement.
  • EASY TO INSTALL: 5-star threaded knobs and a standard 3/8” x ¾” miter gauge slot bracket allows you to set up your feather boards quickly and easily to any miter slot. Also includes 5/16”-18 t-bolts for t-slot or t-track applications.
  • VERSATILITY: For band saws, router tables and/or any woodworking machine with a standard 3/8” x ¾” miter gauge slot – double stacked and locked in both the horizontal and vertical position.
Check Stock

Magswitch Universal Featherboard (Set of 2)

  • INCLUDES: (2) Featherboards with Threaded 5 Star Knobs, T-Bolts, and Miter Slot Brackets.
  • FUNCTION: Provides optimal feed control and holding action for your stock with minimal kickback to provide you with high precision cuts.
  • FEATURES: This kit possesses additional hardware for adaptive mounting solutions, including miter slot brackets for horizontal mounting, vertical mounting for 3” multi-tracks and plastic spacers for stackable featherboards.
  • VERSATILE: This feather board contains a miter lock system (plus a reversible profile) that is compatible with both, t-slots and miter slots for table saws, band saws and router tables.
  • PREMIUM DESIGN: Manufactured in color-alert orange, these featherboards are quick and easy to adjust and are molded out of high quality plastic designed to give you functional flexibility and long term usage.
Check Stock

T Slot Bolts for Thule Yakima Roof Rack Cross Bars Platform Cargo Basket Stainless M6 / M8 x 30mm/35mm/65mm Square T Track Bolt Adapter to Secure Bike/Ski/Kayak Rack Solar Panel Awning

  • Versatile t Track Bolts - this t-track adapter accessory kit is a great solution to attach items firmly to your t track crossbar, compatible with Thule, Yakima, Whispbar cross bar with t slot, perfect t-track adapter accessory kit to attach bike rack / ski rack / kayak rack, roof rack awning, solar panel, fishing rod holder, cargo box to roof rack cross bars, roof rack cargo basket, car rooftop platform or side rails, works well with most solar panel mounting brackets.
  • Technical Specification - the t bolt is made of 304 solid stainless steel, 79 in x 0.79 in x 0.16 in (20mm x 20mm x 4mm) square head base, m6 / m8 threading, 30m / 35mm / 65mm length.
  • Easy to Set Up - no drilling, cleaner look, just need to slide it into the t slot of your roof bar, and won't scratch your cross bar, great alternative to roof rack t track clamp*NOTE-please check the dimension of your cross bar rail, this t bolts base is 20mm x 20mm x 4mm (L x W x Thickness)*.
  • Marine Resistant - stamping t slot accessories, more durable compared with welding parts, made of solid 304 stainless steel, it features rust resistant and corrosion resistant even in salt water, designed for most harsh environment, perfect t track accessories for suv / rv roof top.
Check Stock

POWERTEC 71614 Miter T Locking Bolts Improved Flange Bolt & T-Bolt Accessory for 3/4 x 3/8 Miter Gauge Slots on Table Saws Router Table & Unisaw to Mount Feather Boards and Jigs 10PK

  • FUNCTION: When utilized with t-slotted miter slots, these woodworking tools hold workstock in place for positioning and fixturing for a wide range of applications or any type of jig to your table saw, router table, or any tool with a standard 3/4" x 3/8" miter gauge slot.
  • CLAMP ACTION: Clamping action is greatly improved over competitive miter track slot fixture hardware kits. Locking hardware seamlessly slides into and secures with its oversized t-slot mount and allows you to put clamping pressure anywhere along the flush-mounted T-slot or T-track on Table saw.
  • PRECISION and COMPATIBILITY: Allows t-slot stops to be made quickly from both ¾” and 1-1/2” stock – Ideal for hold downs, glue ups and jig fixture assembly.
  • DIMENSIONS: Length 2-inch | Threaded 1/4”-20 | Isolation Mount Oval Shaped Head .971” long by .882” wide by .106” thickness.
Check Stock

3030 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs M6 T Nuts and M6X10 Hex Screw Bolt for 30S 30x30 Aluminum Extrusion Profiles Rail Accessories

  • 3030 Aluminum Extrusion Aluminum Profiles Brackets Set, 20pcs 3030 Corner Brackets Connector, 40pcs M6 T-Nuts and 40pcs M6 Hex Screw Bolt for T Slot Rail 8mm T/V Slot 30mm Series Aluminum Rail Accessories.
  • 3030 series aluminum extrusion connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • 40pcs M6 t slot nuts and bolts: 40pcs carbon steel galvanized M6 x 10mm t-slot nuts, 40pcs stainless steel M6 x 10mm hex socket cap screw bolt.
  • Aluminum extrusion t bracket used to connect pieces of 30mm aluminum extrusion at a 90 degree angle suitable for most of metric 30 series aluminum profile extrusion.
  • T-slot aluminum extrusion rail M6x10mm drop in T-Nuts, It can be positioned at any position of the profile instead of sliding in at the end, which is more convenient to use.
Check Stock