Categories

Best T8 Electronic Ballasts

NYLL - (4 Pack 4 FT/ 48” Plug & Play LED Tube - Cool White (4100K) T12 LED Directly 40W Relamp Fluorescent Bulb F40/SP41, F40/SPEC41 F40/D41 841 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace fluorescent bulb F40T10, F40T12, F40/ECO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T10/ T12 applications as they all uses Medium Bi-Pin base or G13 base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 50% from 40 watts to 20 watts with 2200 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

Philips LED Instantfit 4-Foot T8 Tube Light Bulb, 1800-Lumen, Cool White (4000K), 16W=32W, Medium Bi-Pin G13 Base, 10-Pack

  • COOL WHITE: Philips LED Instant Fit 4-Foot T8 Tube Light Bulbs offer cool and crisp lighting with high CRI (color rendering index). At 4000 Kelvin these bulbs deliver bright, crisp color ideal..
  • BALLAST KNOWLEDGE REQUIRED: Philips LED 4 Foot T8 Tube Lights Bulbs with InstantFit are the fast and easy way to replace your electronic ballast compatible old fluorescent tubes with efficient LED light. REQUIRES ELECTRONIC BALLAST..
  • ENERGY EFFICIENT: Philips LED Instant Fit 4-Foot T8 Tube Light Bulbs have an estimated annual energy cost of Dollar 1. 93. Philips LED light bulbs are Mercury free and UL Certified..
  • LONG LASTING: These Philips LED bulbs last 10x longer than fluorescent bulbs. Each light bulb is expected to deliver a lifetime of up to 36, 000 hours (based on three hours per day), saving you the cost of frequent bulb replacement..
  • COMPATIBILITY: These Philips LED light bulbs fit in G13 Medium Bi Pin Bases in electronic ballasts.
  • Not compatible with Philips HUE products.
  • Philips LED Instant Fit 4 Foot T8 Tube Light Bulbs are for non connected use only..
Check Stock

Philips LED Frosted Universal Fit 4-Foot T8 Tube Glass Light Bulb EyeComfort Technology Non-Dimmable 1800 Lumen Daylight 5000K 16W=32W Medium Bi-Pin G13 Base 10-Pack

  • DAYLIGHT: Philips LED Instant Fit 4 foot T8 tube light bulbs 10-pack offer bright and comfortable Lighting with high CRI (Color Rendering Index).
  • BALLAST AND WIRING KNOWLEDGE NOT REQUIRED: Philips UniversalFit LED tubes are compatible with most electronic and magnetic ballasts, and are the....
  • COMFORTABLE LIGHT: Our products meet strict test criteria including flicker, strobe, glare and color rendition to ensure they meet EyeComfort....
  • LONG LASTING: Each light bulb is expected to deliver a lifetime of up to 36,000 hours of light (based on 3 hours per day), saving you the cost of....
  • COMPATIBILITY: These Philips LED light bulbs fit in Minatare Bi-Pin G13 bases in electronic and magnetic ballasts.
Check Stock

4Ft T8 LED Plug & Play Type A (25 Pack) 5000K Daylight 1800 Lumen Lamp Electronic Ballast Compatible Fluorescent Tube Light Bulb Retrofit

  • Easiest Installation: Changing a plug and play fluorescent tube to an LED tube is simple and convenient. This Type A Fluorescent tube replacement is designed with an internal driver that allows the tube to operate directly from the existing linear fluorescent ballast...
  • Caution: Only compatible with select Electronic ballasts, The ballast in your fixture must be an approved electronic ballast. This lamp will not work with magnetic ballasts. It only takes a minute to remove the bulbs, and unscrew the plate to see the ballast name & model number. Simply write down the name & model number of the ballast in the fixture and reference the compatibility chart provided. If you have multiple fixtures, It’s important to check the ballast in each one of your fixtures.
  • Natural Daylight Color: With a very bright 5000 Kelvin Temperature, these led tubes are great for the kitchen, laundry, office or any place that requires very crisp and natural light..
  • 5 Year Warranty.: The Warranty details can be found on the attached pictures.
  • 1800 Lumens using only 16 watts - 5000 Kelvin Daylight - Medium Bi-Pin (G13) Base - 1 Inch Diameter/48 Inch length.
Check Stock

GE UltraStart Proline Electronic Ballast 120/277 Volt Program/Rapid Start Ballast Normal Ballast Factor Ballast for Fluorescent Light 1 or 2 Lamp T12

  • REPLACeMENT FOR MAGNETIC ELECTRONIC BALLASTS: These high-performance ballasts are designed for replacement of magnetic T12 ballasts during maintenance....
  • BALLASTS FOR ENERGY SAVINGS AND EFFICIENCY: GE MVP T12 ballasts have the same wiring and mounting requirements as standard magnetic ballasts and....
  • VERSATILE BALLASTS: This ballast operates both standard and energy saving lamps, as well as two-lamp or one-lamp orientation..
  • MULTIVOLT ELECTRONIC BALLAST: This T12 ballast handles voltage from 120 to 277 Volts..
  • LIGHTWEIGHT AND LOW-PROFILE BALLAST: Low-profile and lightweight housing simplifies installation, increases portability, and reduces transportation....
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 3000K

  • ...h new ones to avoid potential arcing and overheating..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • ...h new ones to avoid potential arcing and overheating..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable.UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, UL - 4000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

Fulham Workhorse Electronic Ballast, Instant, 277V, -20deg.F

  • Price For: Each Wiring Type: Parallel Power Factor: Greater Than 0.9 Total Harmonic Distortion: Less Than 33.% Min. Starting Temp.: -20 Degrees F Light Output: Normal Ballast Type: Electronic Special Features: Versatile, High Power Factor, Lightweight, Small Case Size Ballast Factor: 1.18 Start Type: Instant Ballast Family: WorkHorse Item: Electronic Ballast.
  • Lamp Type: CFT, CFTR, CFQ, 2D, CR, T5, T5HO, T8, T12 Lamps Number of F32T8(30W) Lamps: 1 Number of F17T8 Lamps: 1 Length: 3-5/16" Number of F32T8(28W) Lamps: 1 Number of F32T8 Lamps: 1 Height: 1" Number of F32T8(26W) Lamps: 1 Number of F25T8 Lamps: 1 Amps AC: 0.15 Number of F28T8 Lamps: 1 Number of F14T5 Lamps: 1 or 2 Number of F20T12 Lamps: 1 Number of F28T5 Lamps: 1.
  • Number of F32T8U Lamps: 1 Number of F21T5 Lamps: 1 or 2 Number of F24T5 Lamps: 1 Voltage: 277 Number of F18/19T8 Lamps: 1 Number of F30T8 Lamps: 1 Input Watts: 5 to 35 Number of F15T8 Lamps: 1 Width: 2-5/16" Number of F13T8 Lamps: 1 Number of Lamps: 1 or 2 Country of Origin (subject to change): China.
Check Stock

Luxrite 4FT T8 LED Tube Light, Ballast and Ballast Bypass Compatible, 13W=32W, 4000K Cool White, Single-End or Double-End Powered, Plug & Play, F32T8 Fluorescent Tube Replacement, Damp Rated (4 Pack)

  • RELIABLE LIGHTING - Zero flickering light, zero delay, and zero worries with 48" t8 LED bulbs that provide high quality indoor and outdoor lighting. Each tube bulb is quick to install, damp location rated, comes UL listed and UL classified for your safety, works with magnetic and electronic ballasts, works in direct wire ballast bypass installations, is g13 2-pin base, and backed by a 5 YEAR WARRANTY..
Check Stock

ENERGY PRO Ballast 2 Lamp Model: SLE-232-120-RS-LPF ~ Rapid Start Electronic Ballast, white

  • This Electronic Single Lamp Fluorescent Ballast is a high performance, efficient, and rapid start ballast for linear fluorescent lamps - A perfect fit replacement ballast for recessed or surfaced mounted lighting fixtures within the office or home for the following lamp types: F14T8, F14T12, F15T8, F15T12, F17T8, F18T8, FT18W/2G11, F20T8 & F20T12.
  • The small metal case enclosure is lightweight (5.2 ounces) and includes mounting holes for ease of access and installation.
  • Organized lead wires eliminate interference with mounting holes and setup.
  • Great for fish or reptile lighting, the fluorescent lighting is able to produce high levels of UV lighting.
  • This ballast operates linear fluorescent lamps such as F14T8, F14T12, F15T8, F15T12, F17T8, F18T8, FT18W/2G11, F20T8 & F20T12.
  • Designed with safety in mind, this ballast contains no PCBs, is UL & cUL listed, and has a Class P Inherent Thermal Protection.
  • This Electronic Fluorescent Ballast offers a 1 Year Warranty.
Check Stock