Best T8 Tube Lamp
Ghiuop 25-Pack T8 LED Bulbs 4 Foot Tube Light, 4ft LED Shop Garage Warehouse Light, 20W 5000K 2600LM Daylight White, Fluorescent Lights Tube Replacement, Ballast Bypass, Dual-end Powered, Clear Cover
- 【5000k Super Bright & Energy Saving】This T8 LED bulb has 2600+ lumens and a CRI rating of 80+. Each 4ft led light tube has a low power consumption of 20w, instantly saving you 60% on your electricity bill when you replace your old 40 watt fluorescent tube with 20w LED lamp. The LED t8 light tube bulbs are widely used in shop, warehouse, garage, mall, hotel, office, convenience store, gas station, parking lots etc..
- 【Premium Quality & Long Lifespan】: T8 LED bulbs are made of aluminum. Compared with the glass light tube, Ghiuop light tubes not only have a larger luminous surface, but also safer. Moreover, the aluminum light tubes can better dissipate heat and increase the service life of the fixture(50,000+ hour lifespan, last up to 20+ years). Reduce led light tube replacement frequency, saving money and time..
- 【Reliable Lighting & Shatterproof 】Zero flickering light, zero delay, and zero worries with 48" LED t8 lights that provide high quality indoor and outdoor lighting. The 4ft led bulbs have been packed very well with Styrofoam cushioning and end cap to protect them. t8 led light has shatterproof property because it is equipped with an aluminum body and a frosted lens..
- 【Easy Ballast Bypass Installation】Fluorescent replacement is simp....
Check StockNon-shunted Turn Type T8 Lamp Holder JACKYLED 50-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts
- Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
- Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
- UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
- Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
- Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
- 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check StockNon-shunted Turn Type T8 Lamp Holder JACKYLED 30-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts
- Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
- Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
- UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
- Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
- Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
- 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check StockT5 T8 LED Tube Connector Cable Wire 8 inch Double Male to Male End Extension Cord for Integrated LED Fluorescent Tube Light Bulb Lamp Holder Socket(3-Pack 3Pin Male)
- √ Double male to male Connector cable for T5 T8 LED Lamp Connecting Wire can be extended, or LED Light Bulb Lamp Holder Socket can be connected..
- √ The products are through 100% aging test and strict quality control.No need welding,no need soldering,easy use..
- √ It is used to link 2 integrated LED strip together without any extra power wiring.also can Extension 2 PCS t5 t8 Double female adater cable,Can reach the length you need..
- √ Design for use on T5 T8 LED integrated Tube light,or 3pin female t5 t8 LED Connector cable wire.
- √ Input: AC 85-250V Max Output: 2.5A, 3-year warranty..
Check StockT5 T8 LED Tube Connector Cable Wire 8inch Double Male to Male End Extension Cord for Integrated LED Fluorescent Tube Light Bulb Lamp Holder Socket(4-Pack 3Pin Male)
- √ Double male to male Connector cable for T5 T8 LED Lamp Connecting Wire can be extended, or LED Light Bulb Lamp Holder Socket can be connected..
- √ The products are through 100% aging test and strict quality control.No need welding,no need soldering,easy use..
- √ It is used to link 2 integrated LED strip together without any extra power wiring.also can Extension 2 PCS t5 t8 Double female adater cable,Can reach the length you need..
- √ Design for use on T5 T8 LED integrated Tube light,or 3pin female t5 t8 LED Connector cable wire.
- √ Input: AC 85-250V Max Output: 2.5A, 3-year warranty..
Check Stock2FT LED Tube Lights, 24' 8W(25W Fluorescent Bulb Replacement) LED Tube Light Fixture, Two Pin G13 Base, 6000K, Works Without Ballast, Dual-Ended Powered, Frosted Cover, Pack of 4
- ✔Pack of 4, 8W G13 LED Tube Light Bulbs, Great replacement of F18T8 F20T10 F20T12/CW Fluoresent Lights, 1120LM, 6000Kelvin, Dual End Powered, LED Tube lights 2FT come on quickly and reliably, bulbs are perfect for place where you need lots of light, such as workshop basement garage barn.
- ✔ENERGY SAVING: Save 52% on your electricity bill! Replace 20W fluorescent tubes by 8W 2FT LED Tube Light . Reduce re-lamp frequency with a lifetime of 50,000+ rated hours (17 years with 8 hours/day 365 days).
- ✔EASY INSTALLATION: Existing ballast needs to be removed or by-passed. International standard shape for T8 LED Tube light 2FT. easily fitted Instead of traditional fluorescent tube lamps..
- ✔SAFETY: Like all other LED tubes on market, our T8 led tube lights 2FT take the less fragile plastic covers, so the special flame retardant material on the double ends is very important for avoiding the risk of fire disaster, which may caused by unexpected short circuit etc..
- ✔ QUALITY ASSURANCE - 3-year unlimited warranty, easy and fast replacement is offered if any quality issue.
Check Stock12-Pack JACKYLED Non-Shunted Turn-Type T8 Lamp Holder UL Socket Tombstone with 10 inches Wires Attached for LED Fluorescent Tube Replacements
- Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
- Max Voltage: 601V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
- UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 101% safe from fire hazard, durable even after years of use..
- Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires, plug the tube in and twist, a plug-and-play solution for your lighting projects..
- Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T9 lights..
- 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check StockThe Axiom
- ✔ Ballast Removal required : Remove the ballast before you install these T8 4ft led bulbs 2pin ends!.
- ✔ SAVE 65% INSTANTLY - Save 65% on your electricity bill. Replace 80 Watt fluorescent tubes with 28 Watt LED Tube lights (Lighting output 2640 lumens) ..
- ✔ HIGH BRIGHTNESS - Using imported high brightness LED as light source,Brightness is three times as the same power traditional light source.
- ✔ EASY INSTALLATION - Can be installed on the traditional G13 4FT T8 lamp socket, bypass the starter and ballast before installation.This 4ft led bulb is double-ended connection. Fast, simple and secure installation..
Check Stock12inch 1200 LM LED Under Cabinet Light T8 Integrated Tube Light Fixture for Utility Shop Light Ceiling Lighting with ON/Off Switch White 6000-6500K
- 1)Super Bright & Energy Saving - This T8 LED Tube Light with More Than 1200 LM Output and 80% Energy Saving and Generate Extremely Low Heat , 30....
- 2)Linkable & Easy Install - These T8 LED Tubes Can Be Easily Connected n Series and n Parallel. We Recommend Using These Lamps n Parallel. If it is....
- 3)Safe & Comfortable - This T8 LED Tube Light is Lead-free, Mercury-free, No Flicker and No UV .And The Light Temperature is 6000-6500k with....
- 4)Widely Application - Perfect for Garage, Storage Area, Workbench, Basement, Home, Under Cabinet, Office, Hotel, School, Supermarket, Subway..
- 5)Long Lifespan : Long Lifespan 50000 hours , Each Day 8 Hours Lower Maintenance Costs. Extremely Long Life Reduces Re-lamp Frequency..
Check Stock24-Pack JESLED T8 U Clips Holder Bracket for 8FT LED Light Bulbs LED Fluorescent Tube Replacement Mounting Accessories Stainless Steel Lamp Support Lampholder Pipe Clamps to Prevent Sagging
- 24 Pieces T8 U clips/brackets/lamp holder for mounting T8 T10 T12 led fluorescent tube replacement( without screw )..
- Stainless steel material, with plastic finish to protect the tubes, no scratch, ideal to prevent 8ft led light bulbs sagging..
- Stable and easy to install, using one or two clips for each t8 8ft led tube light..
- If you need 8ft single pin led light bulbs, please search “B074MC1FW3”, “B074MCTBVN”,“B075D7N2V4”..
- JESLED offers 5 Years UNLIMITED warranty. Contact our customer service team 24/7!.
Check StockLuxrite 12-Pack 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC
- 3 COLOR OPTIONS - Not able to decide which color you want in your space? Each t8 LED light tube has an adjustable color switch attached which can be used to change between 3 cct color temperatures. Enjoy your lights at 3500K natural white, 4000K cool white, or 5000K bright white. Feel free to adjust your lights further by taking advantage of the dimming feature when using a dimming capable ballast..
- PLUG & PLAY - Use these as a direct replacement to your existing fluorescent tube lights that make use of the ballast already in your ceiling fixture. These 48inch LED bulbs are compatible with an extensive list of ballasts so you can just install these without making any adjustment. No need to change your shunted lamp holders or tombstones. Check ballast list for compatibility..
- BALLAST BYPASS - Not using a ballast? Feel free to hardwire these directly since these can handle single end or dual end powered connections. Capable of both 120V and 277V wiring installations and can work with existing shunted lamp holders/tombstones when dual end connected. If using a single end install, you will need to use non-shunted lamp holders/tombstones..
- CONTINUOUS LIGHT - Built with an astounding 50,000 hours of lifetime which means no replacement will be needed for the n....
Check StockLUXRITE 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC (4 Pack)
- 3 COLOR OPTIONS - Not able to decide which color you want in your space? Each t8 LED light tube has an adjustable color switch attached which can be used to change between 3 cct color temperatures. Enjoy your lights at 3500K natural white, 4000K cool white, or 5000K bright white. Feel free to adjust your lights further by taking advantage of the dimming feature when using a dimming capable ballast..
- PLUG & PLAY - Use these as a direct replacement to your existing fluorescent tube lights that make use of the ballast already in your ceiling fixture. These 48inch LED bulbs are compatible with an extensive list of ballasts so you can just install these without making any adjustment. No need to change your shunted lamp holders or tombstones. Check ballast list for compatibility..
- BALLAST BYPASS - Not using a ballast? Feel free to hardwire these directly since these can handle single end or dual end powered connections. Capable of both 120V and 277V wiring installations and can work with existing shunted lamp holders/tombstones when dual end connected. If using a single end install, you will need to use non-shunted lamp holders/tombstones..
- CONTINUOUS LIGHT - Built with an astounding 50,000 hours of lifetime which means no replacement will be needed for the n....
Check StockSUNLITE 32w 48in T8 BlackLight Blue Fluorescent Linear Tube Light
- Fluorescent 32 watt black light blue T8 straight tube features a medium bi-pin base, and 20,000 hours average life.
- A Blacklight Blue lamp is essentially the same as a standard Blacklight but the glass is designed to filter out visible light.
- Used by psychedelic shops for lighting fluorescent posters, displays, etc.
- Sunlite T8 48 inch fluorescent bulb, 32W,.
- Base: G22 Medium Bipost, Rated Life (hours): 20000.
Check Stock