Categories

Best Table Saw Miter Gauge Fence

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a met....
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock

UOKRR Precision Miter Gauge for Table Saw Craftsman Telescoping 20" to 36" Aluminum Miter Fence Repetitive Cut Flip Stop 60° Angled Ends for Maximum Stock Support

  • ...raved scale and 9mm thicken plate, it's not easy to deform and with the features of 0.001 inch / 0.02mm high-accuracy. 20" to 36" Telescoping aluminum miter fence with striking metric and imperial scale design will more convenient for your operation, come with a aluminum flip stop for repetitive angled cuts on your table saw..
  • Compatible Standard Slot: The length of the miter bar is 19.68", and its slid smooth and perfect fit the guide rail for your table saw, the miter gauge fits standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot, and it can be installed on most table saws..
  • Tool Free Installation: The miter gauge is very easy to setup and locking by manually turning the knob, made of premium aluminum alloy with its surface treated by CNC-machined anodic oxidation, which has higher wear resistance, the surface has been deburred and smoothed, no need to worry about cutting your hands..
  • Our Service: We provide 2 years warranty for our miter gauge, free return or replacement within 30 days, please feel free to contact us if there will be any problems, we will give you a satisfying solution ASAP..
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle..
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees..
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting..
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for....
Check Stock

Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
Check Stock

Table Saw, Mini Polisher, Benchtop Buffer Grinder, Polishing Engraving Carving Sanding Cutting, for DIY Jewelry Lapidary Gem Rock Woodworking (D.Woodworking Table Saw 10000RPM)

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
  • [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip. Sets up in seconds to cut wood, metal, tile, aluminum or plastic..
Check Stock

Grizzly Industrial G0701-19 5 HP Ultimate Bandsaw

  • Blade tension indicator quick change blade release/tensioning with blade tracking window.
  • Deluxe cast iron fence with extruded aluminum re-saw fence w.
  • Deluxe cast iron fence with extruded aluminum re-saw fence with precision-ground cast iron table.
  • Fence adjusts for blade lead includes scale magnifying window and 1-Inch blade.
  • Micro adjusting rack and pinion table tilt and height scale measurement.
  • Miter gauge foot brake stop rack and pinion upper guide adjustment and 4-Inch dust port x 2.
Check Stock

Nightcore Table Saw, 10-Inch 15-Amp Portable Multifunctional Saw w/36T Blade, 5000RPM & 45º Double-Bevel Cut Aluminum Table Saw, Bench Saw with Metal Stand & Sliding Miter Gauge for Woodworking

  • Remarkable Cutting Performance: This portable table saw features with high-quality 15 Amp motor bout low in noise, which can achieve 5000 RPM cutting performance, easy to cut all kinds of hardwood. Heavy duty table saw frame effectively prevents table from turning over during cutting..
  • Convenient Bench Table Saw: Our products feature a composite ergonomic design.The on-board storage system to facilitate your wrenches and push rods when not in use. In addition, a safety switch can control the table saw frame and provide overload protection. And 10 inch table saw can be used without bracket, convenient outdoor cutting wood..
  • Coated Aluminum Table top & Premium Blade: With coated aluminum table top, this table saw can reduce additional friction for smoother sliding., while with 26 "tear capability it can easily tear larger wood materials. The watch saw has a 36T carbide blade and is designed with a transparent protection and tearing knife to protect you from accidental injuries and flying debris..
  • Height Adjustment & Double Bevel Cut: Featuring a double bevel cut from 0-45°, this portable table saw offers a 90° -3 "and 45° -2-1/2" bevel cut. Moreover, this portable table saw is equipped with large hand wheel to control blade lifting, convenient for slot....
Check Stock

Husqvarna K4000 Cut-N-Break Saw Orange

  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle.
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile,....
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
Check Stock

WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop

  • Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions.
  • Adjustable miter bar fits snug inside standard 3/4" x 3/8" miter slots.
  • 17-1/2"-long anodized aluminum fence rail adjusts along miter gauge head.
  • Flip-stop adjusts along the fence for repeatable accuracy - Improve safety and accuracy on the table saw and the router table.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

Table Saw Fence Parallel Positioning Tool, Aluminum Alloy Saw Blade Alignment Jig Table Saw Indicator Gauge Woodworking Aligning and Calibrating Adjustable Limit Pin Positioning Ruler

  • Size: Precision steel pin is 350mm/13.78 inch.
  • Fixed block is 54x105mm/2.13x4.13 inch. Our simple set works with any table saw that has a miter slot nominally 3/8" x 3/4"..
  • Fence Alignment: Before it works, please either set or confirm the alignment of your fence to your table, then lock it and make a mark on the fence where the probe touches..
  • Repeat Cuts: When you have your fence set for a certain critical cut, but you have to change it for something else. When you need the fence back at the same spot, just slide the Simple Set back in the track and reset your fence..
  • Easy to Use: You just need to slide the probe until it touches your fence to check your saw blade to miter slot alignment, and lock the thumbwheel. A simple set of fence gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot..
  • Simple set fence gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot. Just slide the probe until it touches your fence, lock the thumbwheel and that' s it - a physical reference between the miter slot and the fence..
Check Stock