Categories

Best Table Saws Under 1000

POWERTEC 71009 Safety Push Block and Stick Set | 5 Pack | Ergonomic Handles with Max Grip | Push blocks and Sticks for Table Saw, Jointers and Woodworking | for Woodworker Safety & Control

  • 【Table saw dust bag 】 : effective at keeping your work area clear of debris. this table saw dust bag is designed for use with the bosch 4000, 4100, GTS1031, and GTS1041A table saws. It also can be used with other table saws that have 2-1/2 inch dust ports on the exterior of the saw..
  • 【Sawdust collector bag】: fits various 10 inch table saws with 2.5 inch dust ports ! Suitable for many different brands, compatible with Bosch Dewalt Makita Ryobi Ridgid Craftsman Porter Cable Rigid Metabo Kobalt Skilsaw Delta. Replaces Bosch part TS1004.
  • 【size】:The dimensions of the dust bag are L 29.5" x W 9.8.
Check Stock

Acrylic Table Saw Protective Cover - Blade Guard for 4-10in Woodworking Saws

  • Keep your table saw blade clean and protected with this acrylic protective cover. Its transparent design allows you to easily see what you're working on, while the R-type material splitting knife makes operation more convenient and efficient..
  • This protective cover is easy to install, saving you time and effort, and it's suitable for table saws with a blade size of 4-10 inches. Its durable acrylic material won't deform easily and will last for a long time..
  • Protect your table saw from dust and dirt with this innovative protective cover. Its transparent design lets you see inside the cover, making it easy to work with, while the R-type material splitting knife allows for s mooth operation..
  • The table saw protective cover is quick and easy to install, and it's suitable for table saws with a blade size of 4-10 inches. Its high-quality acrylic material is resistant to deformation and will last for a long time..
  • This protective cover is the perfect accessory for your table saw. Its transparent design allows you to see inside the cover, while the R-type material splitting knife makes operation more convenient and efficient. Its durable acrylic material is resistant to deformation and will last for a long time. It's also easy to install and fits table saws with....
Check Stock

HAUTMEC Professional Bi-Metal Steel Mini/Junior Hacksaw Blades 6 inch, High Speed Steel Grounded Medium Teeth, Pack of 10, HT0150-CT

  • Four ATB teeth and one raker with deep gullets allow for deeper cuts and improved chip-flow.
  • For cross cutting and ripping soft and hardwoods, plywood, and particleboard.
  • On table saws, sliding table saws and cut-off saws.
Check Stock

Rock Paper Scissors Table Saw - Funny Carpenter Contractor T-Shirt

  • Looking for Handyman gifts for men, Woodworking gifts for men or simply a power tool shirt? Here's a funny table saw shirt.
  • DIY enthusiast weekend warrior or professional, anyone working with power drills, impact drivers, table saws, circular saws, orbital sanders or any....
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Fifty Shades of Grey (Unrated Edition)

  • INCLUDES: Power Tool Switch Replacement with Safety On/Off Toggle Switch. Compatible with Ryobi 452080007 & Craftsman.
  • FUNCTION: Provides you with an emergency stop switch, allowing you to quickly and easily shut down your table saws, router tables, drill press and other electric power hand tools. Also serves as a cost effective replacement for most factory branded safety lock switches.
  • EASY TO USE: Made with a secure, simple and straightforward design that’s color coded and easy to mount in a convenient location – eliminating the need to reach under the table when your hands are full.
  • FEATURES: Removable power tool safety switch key that locks the switch, preventing accidental operations.
  • RATED CURRENT: 20 amps at 125 volts, 12 amps at 250 volts – Approved by UL, TUV, CSA, CE, ETL standards.
Check Stock

Stand Table Saw Protective Cover-Table Saw Protective Covers-Table saw dust cover-table saw blade guard-Anti Dust Case Clear Plastic Guard for 6-12 Inch Saw (R-shaped universal 6-10in)

  • protective cover for 6-12 inch table saw and other saws.According to the size of your saw or the diameter of the exposed saw to choose the right, dividing knife can be adjusted up and down the height..
  • The saw blade dust cover prevents wood chips from flying around when cutting wood, Collect of above-table dust.
  • Table saw blade guard With Dispensing Knife: With dispensing tool which is helpful for woodworking..
  • Independent lateral slides minimize blade exposure,Practical tool parts for workers, make the machine more durable..
  • Size: 7-10 inch table saws 42cm x 22cm, 11-12 inch table saws 45cm x 22cm, dust collection port diameter 32mm.
  • Please check the product information and picture information before you buy, whether it is suitable for your table saw.
Check Stock

Concord Blades WCB1400T120HP 14-Inch 120 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

  • Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick.
  • For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,000.
  • Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood..
  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
  • 3.0 mm kerf design, ATB Grind & 15Degree hook.
Check Stock

JET 708158 Mobile Base Extension Kit

  • STABILITY: 5/8" ground clearance provides a low center of gravity for excellent stability under load..
  • VERSATILITY: Extension rails let you use a base with machines that have long and narrow footprints (e.g., lathes, table saws)..
  • CAPACITY: Strong, yet lightweight base can hold tools up to 1,200 lbs..
  • MOBILITY: Two locking swivel casters offer easy mobility..
  • TOOL-LESS SET-UP: Quick-snap adjustment allows you to configure the base width and length from 24" x 24" to 34" x 34.
Check Stock

MASTEC 8 Inch 64 Tooth Circular Saw Blade Anti Kickback Tooth for Wood Cutting with 5/8-Inch Arbor

  • 【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws..
  • 【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard..
  • 【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting..
  • 【Specification】:8 inch 64T fine finishing wood cutting blade with a 5/8 inch arbor..
  • 【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours..
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

Whirlwind USA MGSB 7 1/4 Inch 60 Teeth Circular Saw Blade for Wood,Carbide Cordless Miter/Table Saw Blade,7/8-5/8 Arbor

  • High quality and professional grade for ripping and crosscu tting of thick hardwood to 3-1/2" thick and softwood to 1" thick..
  • The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws..
  • Ideal for cutting hardwood, softwood, exotic wood and abrasive wood..
  • Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure..
Check Stock

Saw Stand, Power Tools Stand with Workbench Station, Supports up to 500 lbs, 6-Level Height Adjustment, 67-4/5\ Max Sliding Rail, Universal Saw Stand for All Saws even Cutting Machine-SS01

  • 【ROBUST CONSTRUCTION & COMPATIBILITY】Sturdy iron frame and multi-function work table with anti-rust coating, which can withstand bumps and harsh outdoor working conditions during transportation. The double slide rails extend up to 67-4/5 inches. The universal design is suitable for almost all saws on the market, including table saws, band saws, scroll saws, miter saws, and even cutting machines..
  • 【QUICK INSTALL & Easy Fold】Multi-functional saw frame can be quickly assembled and folded without any tools. With the aid of two quick-release mounting brackets, the machine can be easily installed and removed from the saw frame. The folded size is 30.31 inches x 21.26 inches x 6.69 inches and can be stored in the rear of the car or in the cabinet..
  • 【6-LEVEL HEIGHT ADJUSTMENT & SUPPORT 500LB】The SS01 saw stand is specially designed to provide ideal ergonomic working height. The height adjustment range is about 23-1/5"-32-2/5.
Check Stock

Furniture Mod - Furnicraft

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 80 carbide-tipped teeth for ultra-fine finish wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock