Categories

Best Tacoma Black Exhaust Tip

SYKRSS Exhaust Tip Universal 2.5 Inlet 3 Outlet 12 Length Bolt Clamp On Design Stainless Steel Polished Diesel Exhaust Tail Pipe Tip

  • 2.5 inch inside diameter inlet, 3 inch outside diameter outlet, 12 inch overall length. NOTE : Universal exhaust tip fit 2.5" outside diameter pipe,....
  • Made of 304 stainless steel exhaust tip to avoid corrosion and deformation of the existing tailpipe, to prevent the heat back. black the lacquer that....
  • Clamp on design, easy to install, no drill needed. Makes it possible to remove the exhaust tip for cleaning. If you think it isn’t tight enough,....
  • Diesel exhaust tip, rolled edge and angled cut design. Perfectly decorates your vehicle. The unique styling adds a high-performance feel and look to....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the exhaust tail pipe tip, you can feel free to contact us via....
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

Upower 2.5 inch Inlet 4 inch Outlet Exhaust Tip 2.5' to 4' Exhaust Tailpipe Tips 9' Long Black Weld On 1.2mm Thick Stainless Steel 2 1/2 Inlet Rolled End (Pack of 2)

  • 【Upower Exhaust Tip Dimension】2.5 inch inlet diameter.
  • Overall Length:9 inch(2pcs Exhaust Tip are same).
  • 【Design】Weld On - Exhaust Tip Straight Cut- Rolled End.
  • 【Material】High Quality Exhaust Tip Tailpipe built with Stainless steel with black coating. Durable and Anti-corrosive,never Rusty..
  • 【Wide Application】Universal fits any 2 1/2" Outlet or 2.6" Inlet trucks car exhaust tail pipe..
  • 【1 Year Warranty】No instruction is included. Professional installation is highly recommended..
Check Stock

LucaSng 5 Inlet 8 Outlet 36 Long Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Exhaust Stack Tip Smokers 5 ID Inlet 36 Long with Clamp

  • Made of High Quality Stainless Steel ,OE replacement assembly.
  • Inlet: 5", Outlet/Tip Size: 8", Length: 36" ,Gloss Black Finish.
  • Miter Angle Cut Diesel Smoker Exhaust Stack Tip For Diesel Exhaust Systems.
  • Fitment: Universal,For Truck, Dodge, Chevy.
  • Installation should depend on the inside diameter and outside size.
  • Package includes: 1 Exhaust Tip with 1 Exhaust Clamp.
Check Stock

BoardRoad Exhaust Muffler System Cat-Back Matte Black Dual CatBack For 2007-2017 Wrangler JK 2/4DR

  • L-12 in.Muffler Description: Baffled & Chambered Design, No internal Packing, Minimal Interior Drone, Aggressive Sound.Muffler Dimension: 4 x 9 x 18 in Oval Body.
  • 【High Quality】 BoardRoard Exhaust Muffler System delivers the powerful sound with increased power and torque.
  • all welded construction, baffled and chambered for better volume efficiency with unrestricted flow.
  • 【With Black Coated 】The utilization of highly corrosion resistant stainless-steel construction and cutting-edge CNC precision robotic manufacturing techniques ensure consistently perfect fitment, reliable performance and superior longevity. Product features a premium black-coated finish..
  • 【Notice】While these exhaust systems are designed for use on the listed vehicle, some modifications may be necessary depending on your current exhaust setup. We strongly recommend professional installation. Installation Video in the left..
Check Stock

Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 8 Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

  • Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 8"OutLet Cut Stack Tips Gross Black.
  • Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.
Check Stock

LucaSng Universal 5' Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 5' Inlet 8' Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

  • Universal 5" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 5"Inlet 8"OutLet Cut Stack Tips Gross Black.
  • Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 5" (127mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.
Check Stock

Vechkom 2.5inch Inlet Carbon Fiber Y Dual Outlet Exhaust Tip Muffler Tip with Mirror Polishing Stainless Steel 89mm Outlet 1PCS (Glossy Silver）

  • ▶ 【Reference size】2.5inch Inlet Carbon fibre exhaust tip Applicable to most cars. Inlet diameter: 63mm / 2.5inch (applicable to 60mm exhaust pipe). Outlet diameter: 98 mm / 3.8 inches total length: 250 mm / 9.8 inches..
  • ▶ [Excellent performance] Y Dual exhaust ports make the exhaust smoother and the power is improved, bringing you a pleasant driving experience..
  • ▶ [High-quality materials] Made of high-quality stainless steel and carbon fiber materials, it has good corrosion resistance to alkaline solutions and most organic and inorganic acids. Is the ideal choice for DIY, the perfect substitute..
  • ▶ [Easy installation] Exquisite craftsmanship, stylish design, easy installation by fixture, no drilling or welding. After installation, it will enhance the layering of your vehicle, full of elegant style..
  • ▶ 【Fashion Design】 -Y Dual exhaust tip the back of the product has a black design, which is a good way to show the personality of the customer who chooses the product. At the same time, black can match many models and has a wide range of applicability..
Check Stock

AUTOSAVER88 Universal Black Exhaust Tip, 1.5'-2.5' Inlet 4' Outlet 9' Overall Length Stainless Steel Exhaust Tips Powder Coated Finish Tailpipe, Fit Pipes Diameter 1.5 - 2.5 Inch

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
  • Dimension: Standard 1.5"-2.5" x 4" x 9" inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 3 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with powder coated black finish provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

Apeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Polished Stainless Steel with Bolt On Design Installation

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

LCGP 4" to 5" Diesel Exhaust Tip, 12" Overall Length Bolt On Design Truck Tail Tip, Black Powder Coated,Rolled Angle Cut Design

  • 4" Diesel Exhaust tip, 5 inch Outlet 12 inch Overall Length Universal Tail Tip..
  • Surface Finished: Black Powder Coated. Style: Angled Cut - Rolled Edge.
  • Have a small hole on bottom of tip to drain water..
  • Easy Slip On 4" Tailpipe. However, Welding Is Recommend..
  • High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting..
Check Stock

Big Gun Exhaust End Cap (EVO Turndown Tip) (Red)

  • This Billet exhaust tip on the market with its 15 degree angled outlet and machined gunbarrel divots at the tip..
  • This Billet exhaust tip fits on the end of your OEM exhaust system increasing your rides overall performance and sound..
  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

Apeixoto 2.0 2.25 2.5 Inch Adjustable Inlet Exhaust Tip 4 inch Outlet 9 Inch Long Polished Stainless Steel Exhaust Tip with Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter within 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock