Categories

Best Tacoma Exhaust System

PEDAL COMMANDER - PC38 for Toyota Tacoma (2005 and Newer) (2nd & 3rd Gen) SR, SR5, TRD Sport, TRD Off Road, Limited, TRD Pro (2.7L 3.5L 4.0L) | Throttle Response Controller

  • FASTER ACCELERATION: The Pedal Commander system eliminates the delay from your electronic gas pedal, allowing your Toyota Tacoma to accelerate faster, giving your vehicle a night and day difference in performance..
  • 36 ADJUSTABLE SETTINGS: Equipped with 4 different modes: Eco, City, Sport, and Sport +. Each mode has an additional 9 adjustable settings to fine-tune to your liking, making this a must have accessory for your Toyota Tacoma..
  • ECO MODE GAS SAVINGS: The Pedal Commander’s ECO Mode can help increase your Toyota Tacoma MPG and save you up to 20% in fuel economy..
  • QUICK & EASY INSTALLATION: Pedal Commander is a simple plug-and-play system that takes about 6 minutes to install. Now Bluetooth compatible so you can control the unit using our free Pedal Commander app..
  • WILL NOT VOID YOUR WARRANTY: Pedal Commander will not void the warranty on your Toyota Tacoma or leave any trace behind on your ECU..
Check Stock

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 3.0 Inch Exhaust System…

  • DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

POTAUTO MAP 1013W (CF10374) High Performance Car Cabin Air Filter Replacement for DODGE DART, PONTIAC VIBE, TOYOTA TACOMA

  • ▼ Spec.: 8" (Length), 8.07" (Width), 0.67" (Height).
  • ▼ Applications Where Used: (DART 13-16).
  • (TACOMA 05-22) (See Amazon Part Finder for fitments to your cars).
  • ▼ Benefits: (1) Reducing at least 98% of these contaminants (Dust, Exhaust Gas...etc.) from the air passing through the filter &entering the interior of the vehicle. (2) Improved concentration and driving comfort due to high air quality in the cabin. (3) Increase safety through reduced deposits in the fan or on the windscreen, and protect air conditioning performance.
  • ▼ Competitor Cross Reference Part Numbers (for reference only, please check size): CF134, 042-2074, P3752, CAF1765, 68164981AA, CF1052, GM88970273, AF1164, AFC1164, 4871, 94871, PC-5644, C35644, 87139-YZZ09, XC35644, GA-10, 800038P, 49358, 24871, VF2005, CF10374.
  • ▼ *** Change filter every 12 months or 12, 000-15, 000 miles. Check &replace filter if peculiar smell / odors emit from the cabin air outlets, or if the vehicle HVAC system operates with poor performance, or humming, or weak air volume. ***LEGAL DISCLAIMER: The Brand name &Model # (if listed) are for cross reference only. All Brands, Trademarks &Model Numbers remain the property of t....
Check Stock

Floshine 8PCS DIY Stainless Steel 2.25 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 2.25 Inch Exhaust System

  • DIY Exhaust System--Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality--Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit-- 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation--Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment--Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 2.5 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

FORTLUFT Electric Exhaust Cutout Valve Stainless Steel 3.00''/76mm

  • Inside Diameter 3.00”/76mm – Operating Voltage 12V.
  • Electric Motor – Fully Stainless Steel – Fast Opening and Closing.
  • Universal Electric Exhaust Cutout Valve FORTLUFT is a part of the automobile exhaust system. This element allows you to control the exhaust system sound by directing the exhaust gases through the muffler’s direct-flow exhaust pipeline. In turn, the direct-flow exhaust system allows increasing the dynamic characteristics of the car. The valve is mounted by welding method..
  • Electric Exhaust Cutout Valve FORTLUFT is accomplished with a modern electric drive – this is a new technology that, unlike obsolete vacuum valves and other models of electric valves with Y-pipes, ensures quick and reliable work of the mechanism. Nowadays, such electric valves are used by leading automobile manufactures and tuning studios around the world..
  • Electric Exhaust Cutout Valve FORTLUFT is controlled by the remote (product SKU 4401125). The remote control has three buttons: ON / S / OFF. The ON command – fully open, the OFF command – fully close, the S command – partly open/close the valve in six different positions, designed for the situations when you need the exhaust pipeline to be opened/closed partway. The valve can also be connected to a....
Check Stock

Jones Exhaust FLX2006N Stainless Steel Flex Exhaust Tube 2 x 6 10

  • Universal Accessories: This rubber exhaust hanger fits most cars that use an easy-to-replace hanger system, consisting of two holes and a rubber-lined....
  • Function: The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe. Reduce the....
  • Depth: 20mm (0.8") Bore: 11mm (0.43"). It is a universal vehicle tool for exhaust systems of....
  • Installation: First remove the muffler hanger from the exhaust system using the exhaust hanger removal tool. Then hang the new exhaust hanger on the....
  • What You Will Get: 2× rubber exhaust hanger, this rubber exhaust hanger is essential, and it can effectively reduce the sound produced by shaking and....
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Roadformer 5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel (2 Pack)

  • 2 PIECES IN PACK – 5 inch Lap Joint exhaust clamp is made in high quality standard aluminized steel, used for 5 inch OD to ID exhaust system connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is using 12.9 degree high-strength fastener providing real sealing capability of leakage free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, new engineering design provides fast, easy and accurate installation..
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

NICECNC Black Exhaust System Muffler Pipe Compatible with 4 Stroke GY6 50cc Engines Scooters GY6 50cc 139QMB QMB139 1P39QMB Scooter Moped

  • Condition:100% Brand New AFTERMARKET PARTS,This is a great Performance up-grade when installing a big bore kit or a great replacement exhaust for a broken stock exhaust system..
  • Chinese Scooter Parts Gy6, 139QMB, 1P39QMB,50cc Chinese Scooter Performance Exhaust System 4 Stroke.
  • Performance Exhaust System Fits 50cc 4 Stroke Chinese Scooters GY6 50cc, QMB139 50cc Based Chinese Scooter Engines.
  • Fitment:Fits Most GY6-Style 50cc Engines.
Check Stock

KIMPEX Bolt-on Muffler

  • 【Perfect Performance 】This motorcycle exhaust silencer fits for most motorcycles with 48mm diameter exhaust pipes. This does very well at quieting free flow exhaust, not to affect the performance at all..
  • 【Easy to Install 】The muffler exhaust silencer is equipped with a wrench to match the installation of the outlet 48MM pipe, and the design is perfect without additional adjustments.Motorcycle exhaust silencer can be used to replace the old or damaged muffler, easy to install, just remove the screw and tighten it with our own wrench..
  • 【Excellent Function 】48mm motorcycle muffler DB killer makes the exhaust smoother and improve the power, this detachable DB killer can quell the noise from the motorcycle exhaust, At the same time, it can as an extra decoration of your motorcycle, it can also help your motorcycle get the maximum output, it can work as a spark reducer als detachable DB killer, to get rid of the annoying harsh sound..
  • 【High Quality】This motorcycle exhaust pipe muffler made of high grade stainless steel, excellent quality, corrosion resistance, professional modified exhaust system, high temperature resistance, long life，reduce overall weight for maximum output for maximum performance..
Check Stock

4 Pack Bed Cleat Compatible with 2005-2020 Tacoma 2007-2021 Tundra,Replace PT278-35112, PT278-0C010, Fits for Deck Rail System

  • Fits 2005-2021 Toyota Tacoma, 2007-2021 Toyota Tundra,Compatible with Jeep Gladiator,Ram Rail System. (Must Have Deck Rail System).
  • each tie-down bed cleat measures approximately 6” x 1”, Each bed cleat holds a maximum of 110 pounds..
  • Fully adjustable, each tie-down bed cleat slides along the Tacoma bed rail system using a spring-loaded, twist/locking clamp to hold it in place..
  • Provides an additional anchor point for cargo,can be attached directly to the bed clip with an elastic cord or luggage net to secure objects and ensure that all items do not fall off..
  • This tie down bed cleat could directly replace for PT278-35160 / PT278-35112/ PT278-0C010..
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

  • Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
  • Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
  • Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
  • High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
  • Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....
Check Stock