Categories

Best Takane Quartz Clock Movement Replacement

6 Pieces Quartz Clock Movement Mechanism with 6 Pairs Different DIY Clock Hands Battery Operated Repair Parts Replacement Motor Kits (13 mm/ 0.5 Inch)

  • ...ock movements in total, which is nice for mechanism replacements.
  • And the package also comes with 6 pieces diverse sets of clock hands, 6 pieces gaskets and 6 pieces hang hooks, a variety of styles to choose from, offering enough quantity to use and replace.
  • Suitable for different styles of clock frames, clock replacement or making your own customized clock project.
  • Size details: the delicate and colorful clock hands fit well for a diameter of 25 - 35 cm clock surface, while the total length of the shaft is about 13 mm/ 0.5 inches, and the thread length measures approximately 6 mm/ 0.24 inches.
  • Suitable for clock panels with a thickness of 1 - 3 mm/ 0.04 - 0.12 inches, so please check the size before installing with this clock accessories kit.
  • Powered by battery: the quartz DIY wall clock mobile mechanism is powered by AA batteries, which offers nice precision and equipped with sweeping motion.
  • At the same time, the clock movement mechanism can provide the watchmaker with accuracy and reliability, which will not produce annoying ticking sound, moreover, it will provide you with a quiet environment.
  • Comfortable experience and decorative effect: the clock movement mechanism are made of sturdy and durable ABS material while the clock hands are made of....
Check Stock

2 Pieces High Torque Clock Movement Mechanism with 24 Inch Clock Long Spade Wooden Clock Hands Replacement Kit Mechanism for DIY Wall Clock Repair Parts Replacement

  • Package information: you will get 2 pieces of quartz clock movements (15 mm), 2 pieces of gasket tools, 2 pieces of metal hooks and 2 types of walnut....
  • Product material: our clock movement replacement kit is quality.
  • The clock hand is made of walnut wood, which is wear-resistant and scratch-resistant,....
  • Size of the kit: the high-torque long shaft clock movement is approx. 15mm/ 0.59 inch, and the thickness of the panel cannot exceed 12 mm/ 0.47inch.
  • Eye-catching design: the replacement clock movement kit is chic but practical.
  • The clock hand has a retro look and the movement is simple, nicely....
  • Accurate and quiet: replacement quartz clock movement is featured with high precision clock mechanism, really accurate and dependable, and it is....
Check Stock

5 Pieces DIY Quartz Clock Movement Mechanism Repair Parts Replacement Battery Operated Clock Motor Kits with 7 Different Pairs of Hands for DIY Clock Repairment (0.7 Inch)

  • Quantity package: this battery clock replacement mechanism set comes with 5 quartz clock movements, 7 pairs of clock hands, 5 gaskets and 5 hang hooks, and the enough quantity to use and replace, provides a variety of styles to choose from, which can be applied for different styles of clock frames, clock replacement or making your own customized clock project.
  • Size information: the total length of the shaft is about 18 mm/ 0.7 inch, while the thread length measures approximately 11 mm/ 0.43 inch, which is suitable for clock panels with a thickness of 4 - 7 mm/ 0.16 - 0.28 inch, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit.
  • Practical and durable: the clock movement mechanism is powered by AA batteries (not included), and the quartz DIY wall clock mobile mechanism has nice precision and is equipped with sweeping motion, which can provide the watchmaker with reliability and keep quiet when you are reading or sleeping.
  • Reliable material: these clock hands are made of quality aluminum, come in 4 vivid colors, and offer you a good opportunity for you to DIY your clock, lightweight and corrosion resistant, durable and practical so that they can be applied for a ....
Check Stock

Satisfounder Non-Ticking Hands Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands (1/4 Inch Shaft Length)

  • ♥High torque movement: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands(2 black and 1 white), good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ♥ Size: total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches).
  • Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32 inches) thickness clock panel.Please choose the right size according to picture 2 before purchase..
  • ♥ Three of most popular clock hands. Different Size,Color and Styles. Meet different needs only in one package. The Diameter of Clock Panel should be more than 230mm / 9.06in. The clock hands should be less than 230mm / 9.06in..
  • ♥ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc..
  • ♥ Package contents: a clock movement,a metal hook,3 Second hands,3 Minute hands,3 Hour hands,3 Plastic washers,3 Brass washers and 3 Brass nuts,come with the specially designed protect box..
Check Stock

Continuous Sweep Mini Quartz Movement - Medium Shaft

  • ...s: 7.9 mm (5/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 9.5 mm (3/8 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 9.5 mm (3/8 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Long Shaft

  • ...17.5 mm (11/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 19.1 mm (3/4 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If length is shorter or equal to 19.1 mm (3/4 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Short Shaft

  • ...s: 3.2 mm (1/8 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 4.8 mm (3/16 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If the length is shorter or equal to 4.8 mm (3/16 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock

Quartex Q-80 Quartz Clock Movement, 3/16” Max Dial Thickness, 5/8" Hand Shaft Length

  • ...s: 4.8 mm (3/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 6.4 mm (1/4 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 6.4 mm (1/4 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock

2 Pack Non Ticking Wall Miniature Clock Movements Mechanism with 5 Pairs of Short Hands Quartz Motor Kit Battery Operated DIY Repair Parts Replacement, 5/32 in Max Dial Thick, 1/2 in Shaft Length

  • ✔️ High torque movement: long spindle quartz clock replacement movement parts with metal hook and 5 different pairs of hands(4 black and 1 gold), good for repairing, replacing or make your own customized clock project by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ✔️Accurate time-keeping&quiet motor:Size-total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches).
  • Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32 inches) thickness clock panel. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • equipped with sweeping motion, no ticking.
  • ✔️ Five of most popular miniature clock hands: Different Sizes,Colors and Styles. Meet different needs only in one package,perfect for your clock creations.
  • get to pick out the style and length of the hands that look best with your clock at no additional charge.The Diameter of Clock Panel should be longer than 2.36in/6cm. The clock hands should be less than 3.74in/9.5cm..
  • ✔️ Compatible clock: applicable to cross-stitch, Five-dimensional embroidery, craft clock, frameless draw clock, and especially suitab....
Check Stock

Gatuida 1Pc Clock Mechanism Replacement Quartz DIY Wall Clock Movement Clock Repair Parts Replacement

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a silent environment..
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total sharft length 23 mm (0.9 in),thread length 15.4 mm (0.6 in),suitable for 9 - 13 mm thickness clock panel..
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for installation,Multiple choices in one set..
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying..
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
Check Stock

Unique Irregular Multicolor Wall Clock 21\ W x 21\ H (Light Blue and Pink)

  • Features a colorful, reflective surface with dual color options..
  • U.S. made Takane quartz movement for reliable time-keeping. Powered by one AA battery (not I..
  • All uniQstiQ clocks are made in the U.S.A.
Check Stock

2 Pieces Silent Clock Movement Mechanism Long and Short Shaft Clock Mechanism with 6 Different Pairs of Hands DIY Clock Repair Parts Motor Replacemen

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any....
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total....
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for....
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or....
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to....
Check Stock

Clock Motor Movement Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands (Shaft Length 0.9 Inch/ 23 mm, Black Red)

  • Features: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands, good for repairing, replacing or making a clock by yourself, these replacement parts suit well to different styles of clock frame.
  • Size: total shaft length is 23 mm (0.9 inches), thread length is 14.6 mm (0.57 inches).
  • Jump second movement, suitable for 9 - 13 mm (0.35 - 0.51 inches) thickness clock panel.
  • Hole center to the tip hand size: the hour hands are approx. 70.5 mm/ 2.78 inch, 70 mm/ 2.76 inches and 82 mm/ 3.2 inches respectively, minute hands are approx. 101 mm/ 3.98 inches, 92 mm/ 3.6 inches and 117 mm/ 4.6 inches, 2 second hands are approx. 100 mm/ 3.9 inches, 1 second caps is approx. 7 mm/ 0.28 inches.
  • Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc..
  • Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.
Check Stock