Deep Water
- Notice: Standard Tamiya plug, this plug 2 hole, one is half cicle, another is square. This battery is 8 Cell AA Battery Packs and Standard Tamiya plug. Package include: 1 Pack 9.6V 2000mAh Ni-Mh High Capacity battery and 1 pack USB charge cable,fit for Robots and some EVO Scan Scanner.
- Standard Tamiya plug cross-section dimensions 0.52*0.28 in/1.34*1.0cm(LxW). 9.6V Ni-Mh Battery Suitable for various applications, the 9.6V RC battery pack will work with most hobby units such as RC monster trucks, olar express trains,ricochet RC trucks, RC beetles, RC Hummers, Traxx Tyco cars, radio shack RC cars, 1/20 Tanks.
- The replacement NiMH 9.6V 2000mAh battery pack dimensions:L* W *H 4.09"* 2.32"*0.63" . built-in standard Tamiya connector..
- 9.6V 2000mAh NiMh Tamiya RC Battery Pack replacement for 1/20 RC Tank and Uniway Scale 30KM/H RC Cars, work time is 3-4 times than other 9.6V 700mAH Battery, charge time is 6-10 hours..
- Make sure your device battery dimension is same as this one and your battery plug is same as Tamiya standard plug, one hole is half circle,another hole is square,Just as product picture show.NiMH Battery Pack 9.6V 2000mAh High Capacity Rechargeable RC Battery with Standard Tamiya Connector for RC Car, Robots, Security.
Check StockForster Products 5.56 NATO MIN and MAX Headspace Gage Set
- 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
- GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
- MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
- PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check StockSMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071
- ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
- ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
- ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
- ▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
- ▶ What You Get: 1 x Ballhead with 1/4’’ Screw.
Check StockTAMIYA 0445007 Bumper Grasshopper Hornet
- This item works with: Tamiya 58041 58354 Frog, 58043 Grasshopper I, 58045 Hornet.
Check StockTamiya 58667 RC Audi Quattro A2 Rally Car Kit, TT-02 Chassis
Check Stocktamiya
- X designated colors have a glossy finish while XF designated colors are flat finish..
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner..
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish..
- For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish..
Check StockSMALLRIG Monitor Cage for Atomos Shogun Ninja Assassin - 1788
- It’s only compatible for Atomos Shogun and Ninja Assassin (Shogun Inferno, Shogun Flame, Ninja Inferno, Ninja Flame, Shogun Studio and other monitors CAN NOT be used on this cage).
- This device comes with arrays of 1/4″-20 & 3/8″-16 accessories mounting holes for extended functions.
- A NATO rail on each end of the top for attaching NATO rail clamps.
- anti-off device to prevent the SSD card from sliding.
- equipped with a NATO rail on the bottom to attach NATO rigs.
- Enable an access to mount the SmallRig sunhood for Atomos Shogun and Ninja Assassin Monitor.
- Package includes: 1 * monitor cage, 1 * cable clamp, 2 * 1/4″-20 screws.
Check Stock2 Pairs ShareGoo Mini Tamiya Style Connector to Deans T Plug Male Female 16AWG Silicone Cable Wire Adapter for RC ESC Speed Controller Car Truck FPV Lipo Battery Charging,3.14
- Important Notice:Please make sure the Mini Tamiya Style Plug is the square terminal on RED wire and NOT for airsoft battery..Used to convert battery....
- BE AWARE:Not for Airsoft.If used on rc toy battery,checked the Mini Tamiya-style pluy before use it..
- 2Pieces mini tamiya style female connector to deans style male plug cable,2Pieces mini tamiya style Male connector to deans style female plug cable.
- Important Note: Due to the different Mini Tamiya connection method of Battery or ESC,Some Mini Tamiya connection is Black in round/Red in....
Check StockTamiya America, Inc 1/10 Racing Fighter 2WD Off-Road Buggy DT03 Kit, TAM58628
- Main manufacturing countries: Philippines.
- Battery type: Batteries are sold separately, so please purchase separately..
Check StockNathan Zipster Running Belt.Bounce Free Waist Pack. Pockets with Zippers. Runners Fanny Pack. Fits All iPhones, Android, Samsung etc. for Men and Women
- 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
- GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
- MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455".
- PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check StockTamiya America, Inc Spray Lacquer TS-54 Metallic Blue, TAM85054
- Tamiya USA is a United States based company.
- This item is compatible with: Tamiya 1/14 Tractor, 1/18 TLT-1 Rockbuster, Bruiser , CC-01 Truck, Clodbuster and Super Clodbuster, Dark Impact DF3, DF03 Buggy DF03RA Rally, F-150/S-10, Hi-Lift - F350 Tundra HiLux, Hummer, Lunch Box, Terra Crusher, Wild Dagger Twin Detonator, Wild Willy 2 - Wild Willy 2000.
Check StockOnkuey Tamiya Connector Charger Adapter - One Side Large Female to Mini Male Tamiya Connector for Airsoft Gun LiPO/NiMH Battery
- High performance and Quality components..
- Designed specifically for RC and Airsoft gun batteries.
- Use your large tamiya batteries for guns that require mini tamiya connections.
- Package: 1 piece male mini tamiya to tamiya female connector with wire.
Check Stock