Categories

Best Tantalum Fastener

Rexka Rear Trunk Liner Push-Type Retainer for Mazda B467-68-AC3-02 CX-7 CX-9 Mazda 5 (Pack of 30)

  • Other Names:Console Assembly Screw, Door Trim Panel Fastener, Side Cover Fastener, Lower Trim Panel Fastener, Pkg Tray Trim Clip, Rear Panel Trim Fastener, Rear Pillar Trim Fastener, Side Panel Fastener, Side Trim Fastener, Trunk Side Trim Fastener, Upper Molding Fastener, Cowl Trim Fastener, Trunk Lid Trim Fastener, Quarter Pillar Trim Fastener, Rear Pillar Trim Clip, Trim Panel Assembly Fastener, Under Cover Fastener, Lower Center Pillar Trim Fastener, Trim Panel Assembly Clip, Fastener.
  • Head Diameter: 18mm Stem Length: 14mm Fits Into 6mm Hole.
  • Replaces Mazda: B46768AC302 Mazda 5, CX-7, CX-9, Miata, Millenia, MX-6, RX-7 & Protégé 1993 -.
  • Positions:Left Front, Left Lower, Left Rear, Left Upper, Right Front, Right Lower, Right Rear, Right Upper.
Check Stock

EarMen Eagle High-Performance Portable USB DAC and Headphone Amp - PCM DxD and DSD

  • EarMen Eagle is a high-performance pocket-friendly USB DAC and Headphone Amp. It plays all 32bit/384kHz formats including PCM, DXD and DSD, and is....
  • Featuring Audiophile SABRE DAC - Powered by ESS ES9281, which provides high-end audio performance with distortion plus noise (THD+N) less than 0.002%,....
  • Low-Noise Design - EarMen Eagle uses Super LOW ESR tantalum capacitors, high grade components in the power-supply, and 4 layer gold plated PCB....
  • Gold plated PCB - EarMen Eagle’s PCB is 4 layer gold-plated and manufactured in-house using CNC drilling and pattern plating techniques. This....
  • Design - After many years of experience in the audio industry, our engineers have used their knowledge to develop a device that will provide you with....
Check Stock

GIGABYTE Z590 AORUS Tachyon (LGA 1200/ Intel/ Z590/ ATX/Triple M.2/ PCIe 4.0/ USB 3.2 Gen2X2 Type-C/Intel WiFi 6E/ 2.5GbE LAN/Onboard Overclocking Kit/Motherboard)

  • Supports 11th and 10th Gen Intel Core Series Processors.
  • Dual Channel Non-ECC Unbuffered DDR4, 2 DIMMs.
  • Direct 12 Phases Digital VRM Solution with 100A DrMOS and Tantalum Polymer Capacitors Matrix.
  • XTREME MEMORY with 2-DIMM Design and Shielded Memory Routing.
  • Exclusive onboard Overclocking Kit for extreme overclocking.
Check Stock

EarMen Sparrow High-Performance Portable USB DAC and Headphone Amp with Balanced Output - PCM DOP DSD64 DSD128 and MQA

  • EarMen Sparrow is a high-performance USB DAC and Balanced Headphone Amp with MQA Support. Its balanced 2.5mm output provides up to 4Vrms for plenty of....
  • Audiophile SABRE DAC - Powered by flagship ESS ES9281PRO, providing best-in-class audio performance at 124dB DNR and less than 0.0003% THD+N. This....
  • High End Partnership - Designed in cooperation with high end audio company Auris Audio, the Sparrow is engineered using the best components and....
  • Noise Elimination - EarMen Sparrow uses Super LOW ESR tantalum capacitors, high grade components in the power-supply, and 4 layer gold plated PCB....
  • Design - After many years of experience in the audio industry, our engineers have used their knowledge to develop a device that will provide you with....
Check Stock

GIGABYTE Z690 UD DDR4 (LGA 1700/ Intel Z690/ ATX/ DDR4/ Triple M.2/ PCIe 5.0/ USB 3.2 Gen2X2/ Type-C/ 2.5GbE LAN/Motherboard)

  • Intel LGA 1700 Socket: Supports 12th Gen Intel Core Series Processors.
  • DDR4 Compatible: Dual Channel Non-ECC Unbuffered DDR4.
  • Sturdy Power Design: 16+1+2 Digital VRM Design with 60A Power Stage with Tantalum Polymer Capacitors.
  • Comprehensive Thermal Design: Ultra performance VRM Heatsinks.
  • Next Gen Connectivity: PCIe 5.0, Triple NVMe PCIe 4.0 x4 M.2, SuperSpeed USB 3.2 Gen 2x2 Type-C.
  • Fine Tuning Features: RGB FUSION 2.0, Supports Addressable LED & RGB LED Strips, Smart Fan 6, Q-Flash Plus Update BIOS without installing, CPU, Memory, and GPU.
  • Only Compatible with Intel LGA1700 Cooling Brackets.
Check Stock

Cruiser Accessories 82630 License Plate Frame Fastener Caps, Chrome

  • Put the final touch on a novelty/license plate frame with a set of chrome fastener caps.
  • Eliminates the visibility of the fastener and completes the look of your license plate.
  • Fastener caps are chrome plated plastic and designed to fit all novelty/license plates.
  • Includes four (4) fastener caps with plastic cap retainers.
  • User friendly and easy to install, see back of package for installation instructions.
  • Designed to fit all standard novelty/license plates.
  • Easy to install (illustrations on back of package).
Check Stock

Williams TS51709 1/2 Drive Turbo Socket, 18mm

  • Quickly and easily remove damaged or rounded nuts and bolts.
  • Place Socket for Salvage/Damaged Fastener Sockets on fastener and turn with ratchet, breaker bar or T-handle.
  • Grip on fastener tightens as more torque is applied.
  • No hammering is required to install Socket for Salvage/Damaged Fastener Sockets over fastener.
  • Use on all types of standard nuts and bolts as well as studs, pipe nipples, and corroded auto and marine fasteners.
Check Stock

Customizable Text Patch - 2x3 Patch - Coyote Brown

  • 2 inches high by 3 inches wide. Includes hook fastener backing. *Does Not Include Matching Loop Fastener Piece*.
  • Great for hats, bags and jackets with loop fastener panels..
  • Made in the USA, by Tactical Gear Junkie..
  • Camouflage pattern will vary by patch depending on placement of patch on fabric.Description2 inch by 3 inch wide hat patch with hook fastener. Camo backgrounds will vary on each patch. *Does Not Include Matching Loop Fastener Piece*.
Check Stock

Woodzdon 50 Pcs 1/4 Hole Nylon Blind Rivet Fender Flare Bumper Cover Door Trim Retainer for Jeep Wrangler Liberty for GM 10184895 for Chrysler 6506007-AA for Ford N803862-S Plastic Expansion Clip

  • ... Fender Liner Clip, Bumper Fascia Clip, Bumper Clip, Fender Clip, Plastic Clip, Nylon Blind Retainer, Nylon Expansion Retainer, Fender Flare Retainer, Bumper Cover Retainer, Door Trim Retainer, Fender Liner Retainer, Bumper Fascia Retainer, Bumper Retainer, Fender Retainer, Plastic Retainer.
  • Other Names: Nylon Blind Fastener, Nylon Expansion Fastener, Fender Flare Fastener, Bumper Cover Fastener, Door Trim Fastener, Fender Liner Fastener,Bumper Fascia Fastener, Bumper Fastener, Fender Fastener, Plastic Fastener, Flare Rivet, Applique Rivet, Support Rod Rivet, Rocker Molding Rivet, Auto Body Retainer, Trim Moulding Clip, Plastic Clip, Auto Body Rivet, Trim Clip, Car Clip, Automotive Clip, Auto Fastener.
  • Placement: Molded-In-Color Fender Flares, Daytime Running Lamp System, Exterior Plastics Module, Body Color Fender Flares, Front Fascias Parts Module, Black Grille, Fascia to Flare, Fascia to Support Bracket, Flare to Body Side, Flare to Fascia, Front Flare Attaching, Front Flare To Body, Front Liner to Flare, Liner Attach, Rear Flare Attaching, Rear Flare To Liner, Sill to Body Side, Splash Guard to Flare, With Australia Eqiupment Group, Australia Equipment Group, Hood, Air Ducts, Body Moldings.
Check Stock

GIGABYTE Z690 UD AX DDR4 (LGA 1700/ Intel Z690/ ATX/ DDR4/ Triple M.2/ PCIe 5.0/ USB 3.2 Gen2X2/ Type-C/WiFi 6/2.5GbE LAN/Motherboard)

  • Intel LGA 1700 Socket: Supports 12th Gen Intel Core Series Processors.
  • DDR4 Compatible: Dual Channel Non-ECC Unbuffered DDR4.
  • Sturdy Power Design: 16+1+2 Digital VRM Design with 60A Power Stage with Tantalum Polymer Capacitor.
  • Comprehensive Thermal Design: Ultra performance VRM Heatsinks.
  • Next Gen Connectivity: PCIe 5.0, Triple NVMe PCIe 4.0 x4 M.2, SuperSpeed USB 3.2 Gen 2x2 Type-C.
  • Fast Networking: WiFi 6 802.11, 2.5GbE LAN, BT5.
  • Fine Tuning Features: RGB FUSION 2.0, Supports Addressable LED & RGB LED Strips, Smart Fan 6, Q-Flash Plus Update BIOS without installing, CPU, Memory, and GPU.
  • Only Compatible with Intel LGA1700 Cooling Brackets.
Check Stock

General Tools 1265 Snap Fastener Kit with 6 Fasteners

  • This snap fastener kit comes with 6 fasteners and a 2-piece setting tool to connect the fastener to the article of clothing or leather.
  • Poppers are usually used to perform the same functions as buttons as clothing clasps, jean buttons, leather clasps and the sort.
  • The snap fastener setting tool features a knurled body for greater comfort and safety.
  • Snaps are made of brass and nickel-plated for added durability.
  • Use snaps to repair or replace broken fasteners for coats, boat covers, tents, canvas, tarpaulins, awnings, sailcloth, lawn furniture and pool covers.
  • Refills available through General Tools and Instruments 1266 Snap Fastener Refills, 6 Fastener Sets.
Check Stock

Gigabyte Z690 UD DDR4 ATX Motherboard - Supports 12th Gen Intel Core Processors (LGA 1700), DDR4-5333MHz(OC) Memory, 2.5GbE LAN, 1x PCIe 5.0 x16 Slot, 3X NVMe PCIe 4.0 x4 M.2 & USB 3.2 Gen 2x2 Type-C

  • Supports 12th Gen Intel Core Series Processors.
  • Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs.
  • Direct 16+1+2 Digital VRM Design with 60A Power Stage (maximum based on VCORE phase) and Tantalum Polymer Capacitor​.
  • 3 x Ultra-Fast NVMe PCIe 4.0 x4 M.2 with Enlarged Thermal Guard.
  • SuperSpeed USB 3.2 Gen 2x2 TYPE-C delivers up to 20Gb/s transfer speeds.
Check Stock

Disguise Child Deluxe Zelda Costume - 10/12 Purple

  • 100% polyester satin fabric, 100% PVC faux leather, 100% polyurethane foam.
  • Sleeveless dress fastens w/ Hook and Loop fastener at center back.
  • Faux leather stole has metallic finish & printed graphics.
  • fits over shoulders & fastens to dress w/ Hook and Loop fastener.
  • Foam-backed apron fastens to plastic medallion w/ Hook and Loop fastener dots.
  • Molded plastic medallion decorated w/ faux gems, fastens to dress w/ Hook and Loop fastener dots.
Check Stock