Categories

Best Tap Flow Meter Gauge

Automotive Smoke Machine Leak Detector VXSCAN EVAP Vacuum Leakage Tester Fuel Pipe Diagnostic Tester with Flow Meter & Pressure Gauge for All 12V Vehicles

  • 【EVAP SMOKE MACHINE】VXSCAN V3 is a professional vacuum machine for car fuel pipe system leak detection. Supports EVAP system test, tightness test,....
  • 【EASY TO USE】By heating USP mineral oil or baby oil, the automotive smoke machine can be outputs lots of smoke within 30 seconds, to improve....
  • 【SMOKE FLOW METER & PRESSURE GAUGE】Equipped with pressure gauge and adjustable flow meter which helps you control the smoke effect easily. When....
  • 【Air Mode & Smoke Mode】The V3 smoke leak tester adopts an independent switch control design, the air mode independently controls the built-in air....
  • 【WIDELY COMPATIBILITY】Our package includes all accessories (Oil not included), it supports detect the leaks of multi pipe systems on cars,....
Check Stock

Oxygen Air Flow Meter LZQ-1 1~5LPM Oxygen Carbon Dioxide Measuring Flowmeter Gauge Oxygen Gas Flow Meter

  • HIGH PERFORMANCE: All kinds of gas measurement accuracy is high, suitable for a variety of occasions, you can avoid the trouble caused by the reading error when you measure..
  • PRECISE: The air flow meter is simple, practical and easy to use. The transparent panel type makes the reading simple, convenient and clear..
  • CONVENIENT: Gas flow meter is an instrument for measuring gas rate of flow, which is installed in the pipeline to record the gas flow..
  • Texture of Material: The gauge consists of acrylic, plastic and metal. Lightweight and durable, suitable for long-term use..
Check Stock

BTMETER BT-846A Pro HVAC Anemometer Measures Wind Speed Wind Flow Wind Temperature CFM Air Flow Velocity Meter with Backlight MAX MIN AVG

  • ➤【Pro Air Flow CFM Anemometer 】Accurately measures wind velocity in 5 units: m/s, km/h, ft/min, knots, mph. wind temp in ℃/℉ , air flow in....
  • ➤【Higher Range Wind Speed Meter 】Higher Wind Speed Range: 0.001~100 mph (Accuracy: +/- 3% +/- 0.2 reading), Resolution: 0.001. Air temperature....
  • ➤【Airflow CFM Meter】BT-846A wind speed gauge measures Wind flow range: CFM 0-999900 ft3/min, Resolution: 0.001-100, Air flow area : 0.001-9999....
  • ➤【Separated Extendable Wind Sensor】Built with user-friendly extendable wind sensor vane, so you can still look at the readings easily while you....
  • ➤【Must Have for Air Balancing】 Designed for HVAC trouble-shooting, air flow balancing. The separated wind speed sensor can be replaced if it’s....
Check Stock

Argon CO2 Regulator, Tig Mig Welding Regulator Argon Flow Meter with 6.6Ft Gas Hose CGA-580 Inlet 0-3500PSI Pressure Gauge 10-60 CFH

  • CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port..
  • PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank..
  • RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability..
  • APPLICATIONS - The gas pressure regulator can be used with argon, CO2 and helium. Ideal for MIG TIG welding, chemical and electronics industry. The welding gas regulator is an economic alternative for the customers who wants more precise gas metering..
  • PACKAGED WITH HOSE - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and keep your tank a safe distance from your welding project..
Check Stock

AURELIO TECH UPGRATED Version 4 Way A/C Manifold Gauge Set Fits R134A R410A R404A R22 Refrigerants with 5FT Hose, 3 Acme Tank Adapters, Adjustable Couplers and Can Tap

  • 2020 UPGRATE VERSION: 1) Can tap with back-flow preventer. 2) 100% brass and aluminum valve gauge body, knobs are made of brass instead of plastic..
  • Tester Freon gas Service Diagnostic AC Gauges.
  • R134A R410A R404A R22 Manifold Gauge Set A/C..
  • Fahrenheit degree unit with easy to read instrument panel..
  • red for high pressure, blue for low pressure, yellow for refrigerant bottle with ACEM 1/4".
  • 1x adjustable can tap (piercing-style)(1/4" male).
Check Stock

Tbest Turbo Boost Gauge,2\ Car Universal 12V LED Digital Turbo Boost PSI Gauge Meter

  • 【Excellent Performance】Turbo Boost Gauge Meter has High accuracy and easy operation.Numbers and pointer clearly show the pressure.Our Turbo Boost Gauge adopts advanced technique and fine workmanship,which having the characteristics of stable characteristics and high reliability..
  • 【Function】Turbo Boost Gauge is Used to measure the pressure of automobile turbo. Smoke tint lens during the da....
Check Stock

MR CARTOOL T110 Automotive EVAP Smoke Machine, 12V Car Fuel System Leak Tester Detector with Built-in Vacuum Pump & Pressure Gauge & Air Flow Meter for All Vehicles

  • ...Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min..
  • 【Flow Meter & Pressure Gauge】Equipped with pressure gauge and adjustable flow meter to help maintenance personnel to observe the current flow volume and pressure for better control the smoke effect. Built-in over-heat protection, if it exceeds working limit (Over 176℉), it will power off automatically..
  • 【Complete Set】Comes with 4.92ft Smoke Hose, EVAP Special Connector, Standard Cone Adapter, Power Cord Clamp, Valve Core Wrench, Airbag Adaptor, Rubber Connector Part, 3.38oz Empty Bottle for test oil(Please notice: Package does not includes the baby oil), Hanging Hook, Various of Soft Rubber and Hard Rubber Hose Plugs..
  • 【Worry-Free After-Sales】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money! If you have any issues a....
Check Stock

Yeswelder Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

  • Wide Application：Has CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2Tanks. Ideal choice for MIG TIG welding, chemical and electronics industry.
  • Accurate Gas Flow Gague：The Square flow tube reads from 0 - 60 CFH, which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to read, accurate.
  • Multiple Outlet：Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • Design：Combination of regulator and flow meter.
  • Two Connection Ways：You can choose the connection method according to your needs.
Check Stock

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

  • ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an....
  • ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that....
  • TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet....
  • VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Check Stock

10Pcs Car Temperature Gauge Kit-Coolant Temperature Gauge - Digital Temperature Gauge 2inch 52mm Universal Car Truck LED Water Meter Instrument Tool

  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - 12v car water temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy and durable.ABS has excellent complete physical and mechanical properties and good low temperature impact proof. Dimensional stability. Electrical properties, wear proof, chemical proof, dyeing, finished product processing and mechanical processing are better. - car temperature gauge kit.
  • ❃Easy to read in the dark: The blue light on the dial makes it easy to read in the dark. Its measurement range is 40-120 degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant temp gauge.
  • ❃Principle: The water temperature sensor is a thermistor sensor. Screwed to the engine cooling water channel. The thermistor determines the amount of current flowing through the coil of the water temperature gauge. To guide the meter hands - coolant temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy an....
Check Stock

G Francis Keg with Keg Regulator and Beer Dispenser, 128 oz – Portable Keg Draft Beer Dispenser, Portable Beer Dispenser

  • ...ng flat, and place in fridge or cooler.
  • PACKAGE CONTENTS: Mini beer keg with regulator and dispenser kit comes complete with a spear body, crossbar, twist tube, pressure relief ring, nut, white flow-control block, faucet, faucet knob, regulator, regulator base, regulator knob, gauge, and beer hose.
  • 16g CO2 capsule and CO2 cartridges not included.
  • For best results, use beverage grade CO2 cartridges (not all CO2 cartridges are made to be suitable for beverages).
  • Included O-rings are extras, not for initial assembly.
Check Stock

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

ANNMETER Pro HVAC Anemometer- Air Flow Velocity Meter AN-826A 0.001~100Mph Wind Speed Gauge,Handheld Wind Tester Measuring Airflow Movement Temp with Max AVG Current

  • 【CFM Anemometer】Built with lightweight vane sensor to ensure sensitivity for accurate air flow measurement, Extendable cable and wand can extend to 79 inches, makes this cfm wind speed meter tester can easily reach to air outlet of AC, Vent..
  • 【Pro Airflow Air Velocity Meter】-Accurately measure wind speed ranging from 0.001~100Mph (+/- 5% of reading), wind temperature from 14~113℉(+/- 1.8℉). 5 wind speed units optional: m/s, Ft/min, Knots, Km/hr, Mph.
  • 【Wide Applications Wind Detector】-Handheld wind indicator not only can be applied in HVAC system installation and checking, dust vent detection, air conditioner maintenance, but also for outdoor activities: hiking, camping, boat sailing, sky surfing, shooting, drone Flying..
  • 【Humanize Designed Anemometer】-For continuous measurement, you can fix the gauge on a tripod with the thread hole at the bottom. Auto/ Manual power off function for battery saving. Backlight LCD provides clear reading in darkness or dim place..
  • 【Must Have One Air Flow Meter】-A solid storage case comes with AN-826A, for easy carrying and protecting damage from transport. Buy with confidence! For product defective or any further problem, ANNMETER provides you unconditional warranty!.
Check Stock